Software
Houzz Logo Print
carree_gw

Ventahood cleaning the squirrel cage

12 years ago

I have 48 inch ventahood with two fans (I think it is 1200 cfms). I have removed the grease shield and box for cleaning out the grease but as I stare at the white squirrel cage fans, I see that grease has accumulated on the blades. I am not at all handy so I hesitate to attempt to pull this off to clean ....am I meant to be using an Allen key remove the cage for cleaning? And if so, will reinstalling it be a breeze? I am hard pressed to find the space to manipulate the unit without kneeling on the stove (which bluestar cautions against). I did read other posts from a few years ago about paint coming off but I'm wondering if the manufacturing process has changed. Thank you.

Comments (5)

  • 12 years ago

    The wheels can be removed with an Allen wrench. Upon reinstall the squirrel cages need to be set not quite all the way back on the shaft. Push the cage all the way back and then bring it out maybe a 16th of an inch just enough so it doesn't hit the housing. To reinstall there is a flat spot on the shaft that must line up with the setscrew in the squirrel cage. One wheel is black one is white they must be replaced on their respective sides. It could be a challenge to negotiate the tight space.

    To clean the wheels soak them with 409 spray cleaner let sit for a while then spray off with super hot water.

    My VAH is been in use for seven years now with no paint chipping whatsoever

    This post was edited by john.com on Fri, Apr 11, 14 at 14:40

  • 12 years ago

    I have a VAH (8 years), am 'handy', and yet find it a PITA to clean. A long "T" allen wrench makes the process easier than the smaller L shaped type most of us have around. I forget the allen size, but look in the manual and pick one up at a hardware store or Amazon before you start.

    I made the mistake of using Simple Green on my squirrel cages and oh what a peeling mess I had on my hands. Please avoid my mistake.

    The VAH is a great system - but ease of cleaning is not one of its strong points.

  • 12 years ago

    Thanks to you both. I phoned Ventahood today and they readily advocated using a 409 degreaser instead of pulling it down. So guess, I will go that route. Maybe if I do this regularly, I can avoid pulling down that blower forever!

  • 5 years ago

    Stumbled back on this. Curious what the original author thinks of the VAH cleaning six years in? I just broke down my dual cage VAH after too long of not giving it a thorough cleaning, and it was a mess. The 'box' assembly covering the cages was grease laden and the cages were an absolute mess. Took several hours to get the parts & hood clean. I'd previously read that you just needed to clean the outer shield regularly so stepped back my cleaning regimen - darn I guess I should not have bought that easy path.

  • 5 years ago

    I acknowledge to being in denial and lucky if I clean it once a year... I'm actually about 18 month in without a cleaning. I haven't done the breakdown. Just leave it up there and do what we can.