Software
Houzz Logo Print
gates1_gw

9 Years with my HET3

16 years ago

Other than two water pumps going out in it, this has been the best washer I have ever owned, Never had issues with tangling, wrinkles, foul odors, or washing performance. I have clothes that I wear all the time that still look like new. I just read the owners manual, sort my clothes according to fabric, and weight, use HE dergent, the smallest amount recommeded with outstanding results, even in my rock hard water. Id never go back to a top loader. I can even wash my king size duck down comforter in it with excellent result. Anyone have any HE questions, leave a message please

Comments (50)

  • 16 years ago
    last modified: 11 years ago

    I just want to point out that the HE3T in the stores today is probably different from the one you bought in 2001. It might use less water, use lower water temperatures, and be more stingy in running the internal water heater (if it has one). All things that could affect washing performance. Not asserting that the current model is bad, as I have no experience with it.

  • 16 years ago
    last modified: 11 years ago

    I too have one of the orgional HE3t models, and it is still going strong after nearly 7 years. The only repair I have made was to replace the water pump. I couldn't be happier with the results, and I don't look forward to the time I have to pick its replacement. It is a shame the Sears discontinued this Whirlpool sourced line of washers. Other than Miele, only Whirlpool and Whirlpool sourced Kenmore FLs earned the highest rating for cleaning in consumer reports.

    Joe

  • 16 years ago
    last modified: 11 years ago

    Its my understanding, that any changes in the Kenmore FL's took place and they Became He4t, and He5T, other than that, they pretty much remained the same. New FL's use the same amount of water as mine does, I got friends who have them. They were so impressed with mine, they went out and bought their own.

  • 16 years ago
    last modified: 11 years ago

    Energy Star standards have gotten stricter since 2001, and I would assume Whirlpool/Kenmore has kept up with them. The 2001 standards didn't even have a Water Factor requirement.

    Also, I've heard that some Kenmore front-loaders are now being made by LG, not Whirlpool.

  • 16 years ago
    last modified: 11 years ago

    All I can tell you is my friends new HE3T fills with the same amount of water as mine does, With or without clothes in the washer, you can see the same amount sit in the drum when you pause the machine. It doesnt take that much electricity to maintain or boost so little water, considering its only a 1000w heater. Whirpools HE top loaders have the clean boost option which runs the heater in all cycles except a few...mainly the delicates, soak and the washers "Clean Cycle" I read this in the owners manual of a Brand new Bravos with a heater which in this case is 1200 watts. Its cheaper to run a Washers heater than to crank up a 40 plus gallon hot water heater. On the bravos washers you have the option of running the heater or not. The new Kenmore FL are made by LG, Sears is selling the old ones off with up to 500 dollars off of these machine to get rid of them. Maybe Sears had to many quality issues with Whirpool, or maybe LG came in with a loer bid to manufacture the new kenmore machines. I work in manufacturing and I know jobs go to the lowest bidder no matter what it is. This might explain why ALL manufactures have quality issues to some extent, everything is made at the cheapest price so the company can make the most profit. Ive been researching the Bravos, cause I like the HE top loader idea, but I just dont see how they can clean that well after watching it on youtube. Maybe it can, cause I was shocked to death when I first got my Kenmore and it cleaned so good with next to nothing for water. My washer is starting to show its age, even though it is level, the viberation factor is starting to increase on it. Kenmore FL have always taken more time to balance a load...sometimes I think too much when I watch it. My mom has a LG FL...balances faster, had it for three trouble free years now

  • 16 years ago
    last modified: 11 years ago

    That's good news about the water level. Still have to wonder about wash temperature setpoints and internal heater use. On occasion I've tried to drill down on statements that a washer runs the heater on this or that cycle. Usually it turns out that it'll run the heater for the fixed duration of the cycle. Then the cycle will end, even if the target wash temperature hasn't been reached. That's a big problem if there's a long hot water lag at the washer's hot supply. It was certainly a problem for the LG I had for a few days in 2008...and it behaved differently from what Customer Service told me. I suspect they weren't intentionally lying, rather they were describing how that model had behaved in the past. Also, the printed manual that came with the machine was different from the version that was online then; specifically, a box stating the wash temperature setpoints was missing from the printed version. So clearly this kind of thing changes often, probably in the direction of lower temperatures and less heater use.

  • 16 years ago
    last modified: 11 years ago

    Before I bought my FL, the sales lady that I had been dealing with gave me the Training manual for sales employees to study on my machine. It cleaerly states that the heater for on these cycles and the temperature for each one: Stain treat option 130F, Whites whites 140F, Heavy duty 140F and santitary 153F. My enhanced ATM maintains hot water at 140F, warm 104F. and cold at 77F. I did read that my machine was classified as energy Star, it was a huge selling point for this machine at the time. M machine top spin speed is 1200rpm, and I spin everything I can on it, with the modifers to speed up drying time.

  • 16 years ago
    last modified: 11 years ago

    5 years with my duet washer. Manufactured oct 2004. Had the board replaced just after first year. No problems since. I recommend keeping these washers plugged into a surge protector because of the sensitive electronics and power surges. Not sure if that's what's been keeping mine working with zero problems for almost 4 yrs but it has. There is ONE thing I wish they would redesign with these washers...the major amount of time they take to decide to spin and balance a load. Mine always spins really smooth but sometimes it will take 15 minutes to decide. No wonder they market these washers as (wash time equals dry time).......I don't notice much/if any quicker drying, but longer washing.........still, that said, I do like this duet washer/dryer .dryer has had no problems at all.

  • 16 years ago
    last modified: 11 years ago

    I agree with you Mark about the surge protectors on the washers. When we get severe weather, I do unplug my washer for that very reason. I need to put it on a surge protector, I dont relsi hthe idea of forking out 1700 bucks to replace it with some equal to it.

  • 16 years ago
    last modified: 11 years ago

    What surge protector should I buy for my washer and dryer that will keep them grounded and provide better safety to the electrical board? Maybe I should start a new post also...

    I am glad mark40511, you love your Duet washer and dryer. I only like the washer. The dryer always took too long to dry and now with it being a few months past the 5 year extended warranty, it is taking hours and hours to dry anything. I had all my vents cleaned three times and now there is now the long venting into the attic to the roof is clean at last but the dryer is just taking even longer to dry.

  • 16 years ago
    last modified: 11 years ago

    Hey Lynn, is your dryer Electric? It may have a curned out heating element in it, thats why it is taking so long for items to dry. That is not a hard fix to do. Are you using the timed cycles or the auto ones?

  • 16 years ago
    last modified: 11 years ago

    HMMMM

    My Duet dryer will usually dry a LARGE load in an hour.......A medium load in about 45 min's....Now this is NOT bone dry, but to the point where clothes are 97% dry with just a tad bit of moisture left. I don't like drying things bone dry........So something must be wrong with the heating element if you have had your vents cleaned. Get it checked, it shouldn't be talking that long. I will say this, if I had it to do over again, I would have bought the Duet washer and a Regular large dryer with the same cu ft just because they do the same thing and are MUCH cheaper.

  • 16 years ago
    last modified: 11 years ago

    I have a gas dryer and it took 6 hours to dry a load of towels! It took also forever to dry normal clothing that was not heavy that only filled half the dryer. My dryer is only 5.25 years old so I am upset. My extended warranty ran out the first week of November when I began to notice how long it was taking to dry clothes. I cleaned the vents and then found out there was more venting in the attic. Now all the vents are clog free and clean and there is warm heat but the clothes are taking forever to even get 97% dry.

    I can dry a few hand towels with nothing else in the machine in 1 hour.

    I paid good money for the set. I like the washer but I always disliked the dryer and now I really am upset about the dryer.

    Should I pay for an expensive service call or is the machine shot? The white coating on the drum has browned with a little bit of blue which stared also in November 2009.

    I use the timed cycle on the highest heat with the sensor off since that is the only way the clothes can even dry after many hours.

  • 16 years ago
    last modified: 11 years ago

    Lynn, I have a gas Kenmore HE3T dryer and it can dry a full load of towels or jeans in less than an hour. Maybe your Thermostat is bad, or Thermister sensor, or both. Either way, it is cheaper to fix this than replace it. If you or your husband are handy in repairs, u can fix this yourself. How hot is the dryer getting on high heat? I can actually hear my burner ignite when I start mine, and then after it heats up, it will cycle on and off, according to the temperature selected. The parts are not expensive...maybe around 50 bucks total if thats the issue. I will look in my dryers owners manual tomorrow and see if I can help you more

  • 16 years ago
    last modified: 11 years ago

    Lynn, since you stated that all the vents are clean, did you clean inside of the dryer? Meaning down where your lint filter goes? Also pull the dryer out and check the pipe that leads into the dryer,,,it might it some attention too. Take your lint screen and rinse it with water, if it run off the screen, then it is clogged from fabric softener,,,dryer sheets are worse for this. Vacuum out the space where the filter goes, a flash light is a big help. Also inside the drum, make sure the circulation holes are clean as well. hope to hear from you some more

  • 16 years ago
    last modified: 11 years ago

    Lynn,
    you have my sympathies. We have had for several years a similar dryer situation. In talking with the guy who cleans our vents, he mentioned that the main reason we (and I suspect you too!) have this problem is that your dryer is not capable of doing a long vent run. Most and I meant most dryers aren't. We have been in research mode and have discovered only a few dryers can handle a vent run longer than 25 feet and that is a straight run too.

    Go online and check out the charts and compare the number of bends to your run and its total length.

    Here are the models that we have found that are capable of handling our run of about 40 feet and 4 bends...

    Maytag Bravos but not their low end product are rated for 100 feet including bends

    FL Amana NGD7200TW

    GE Long Vent 7.0 DLSR483GGWW yet manual says shortest possible run!

    GE Profile harmony 7.3 DPGT750GCWW up to 150'
    GE DPVH880GJWW tri window up to 150' including turns
    GE DPVH890GJWW tri window up to 150' including turns

    The Amana and the tri-window GEs are front loaders while the others are top loaders with no agitators.

    Is there any way that your vent run can be shortened?

    You could also call up the company that cleaned your vents and ask for their advice too.

  • 16 years ago
    last modified: 11 years ago

    Gates1, I had the machine cleaned also in November 2009 and was surprised at how clogged the lint was inside the machine! I had the vents finally taken out of the attic and cleaned thoroughly and then replaced in the attic in early January 2010. The flexible hose that attaches to the wall was cleaned in November 2009 I was amazed that it was so compacted that it looked like insulation was on the sides. I had paid someone several years ago to do a professional cleaning of all my vents in my house and paid extra for my dryer vent to be cleaned. I don't remember them going into the attic ever.

    I will try to rinse the lint screen tomorrow. I never use dryer sheets (tried a few times and did not like the smell and I have dry skin and prefer to rinse all soap off well through two extra rinse cycles before drying the clothes so I decided no softeners for me). My dryer always leaves my clothes soft but maybe it is because I only buy soft clothes.

    I had vacuumed out the space where the lint filter goes but I will try that tomorrow and have my friend take apart the dryer for me to clean it one more time in case it got clogged again. Since the last time it was cleaned was at the end of November 2009 before I found out that I had to clean the attic vents (had no idea that there was such long venting in the attic... never really thought about it.. I live alone and no one explained any of this when I bought my first washer and dryer 5.25 years ago).

    Earth_pal, thanks you for also caring like some of the other members on this forum which really shows me there are caring people left in this world. Thanks for explaining that you also have a very long vent for your dryer. Maybe you are right that my dryer is not capable of doing such a long run and now is shot from having to vent through such a long path for the 5.25 years. I will look into the dryers you mentioned. I never considered a GE but maybe I will look into that new GE Profile that you mention with the triangular windows if my dryer can't be repaired. I have a lot of work to do and can't be doing laundry all day and waiting all night for things to dry causing me to stay up too late. Yes, I am still up waiting for sheets to dry. I was sick all week and since I am finally not sneezing, my nose is finally not running and I am not as sick, I wanted to put clean sheets on the bed. I have been trying to change them each day to help get rid of my cold. They have been drying for hours! I need to go out and buy a few more sheet sets when I have some time if I this dryer is not fixed soon or replaced.

    Where do I go online to check out the charts and compare the number of bends to your run and its total length? Do you have a link you can share?

    Thank you for sharing these models which I have not looked at yet not realizing that models vary by how much of a vent run they can handle.

    I live in a townhouse and the shortest window is in the room in front of the tiny laundry room that has windows facing the street and the President of my complex lives across the street. She will fine me if she sees me attempting to vent out in the front through the windows. I am not allowed to make any holes in the roof so I am stuck with the long run that goes up the wall in the laundry room to the Attic and goes way up and then across the room to the back of the attic and then up again to vent through the roof. Now I feel I should have bought the house for the same price 12.5 years ago but I fell in love with the modern styling of the townhouse that had the layout I was looking for to have a home office in and I was given permission to do just that.

    Thank you both again for responding and giving me some ideas to try in between clients in the next few days since I am in the middle of my busy season right now. I have two male friends that care and have been trying to help me. I wish I was married to a handy guy that knew all about washers and dryers. :) But at least I have this forum and some good friends that care.

  • 16 years ago
    last modified: 11 years ago

    Hey Lynn!

    I am still getting the hang of posting links and things, so I just sent you a PM instead with the GE dryer vent chart.

    I do wonder if it is possible for you and your neighbors to get together and maybe redo your venting system? I also wonder how the heck this passed building inspection because this sounds like a roundabout way to do something that is consistently recommended to be done as direct and short as possible.

    Hope you feel better!

  • 16 years ago
    last modified: 11 years ago

    Lynn, Before I moved into my current house, my dyer (he3)was in a basement and had to be vented a good 25 feet to the back of the house and it ran fine for years. Now I did have clean out the dryer more often and replace the venting tube also. I also had a fear of too much buildup causing a fire. Your right it, looks like an insulated pipe. If your not the orginal owner of the townhouse, I be the previous owners never cleaned out your vent system. I beleive your dryer will handle the extra distance. Have someone check your thermostat in your dryer before you go buy a new one. I am interested in hearing the outcome of this.

  • 16 years ago
    last modified: 11 years ago

    I have a HE3t gas dryer, with a long and twisted vent run. What I have noticed is that as the duct works get "dirty", the dryer takes longer and longer to dry. The problem seems to be that the gas shuts off quickly if there is not enough air flow through the dryer, causing the drying time to get longer and longer. While I believe this is a safety feature, and it doesn't upset me, it is still frustrating. I do realize that my duct work is much longer and more twisted than it should be. I have no less than 7 turns and probably about 40 feet of duct work.

    Since my dryer is in the kitchen, while sitting at the kitchen table, I can hear the gas ignite and then shut off. Often it shuts off before the set temperature is reached. I believe that it is caused by an overheat type sensor near the gas burner that causes the gas to shut off before the set temp is reached in the drum. Once the overheat sensor shuts the gas off, it take about 90+ seconds before it cycles on again.

    I have to clean my ducts about every 6-12 months. If I do a very thorough job, and clean the insides of the dryer too, then it will dry a large load of towels in less than 30 minutes on the normal cycle. The gas stays on most of the time. As the duct gets "dirty" the gas stays on shorter and shorter periods of time, and the drying time gets longer and longer. Dirty, twisted, and long duct runs have more resistance, thus reducing the airflow, which itself increases dry time, but also causes the dryer to not reach the set temperature, which adds additional time to the dry cycle.

    My ducts run though the basement, so I can take them apart, and clean them segment by segment. They really don't look dirty at all - seem to have just a tiny bit of dust build up along the sides - but it really makes a difference in drying time.

    Unlike the HE3t dryer, some dryers have two motors, one to tumble the clothes, another to drive the fan. I believe the Whirlpool made OASIS dryer has two motors, as well as any LG dryer which has the anit-bacterial cycle. The dryers with two motors can compensate for dirty/longer vent runs by adjusting the fan and creating more force. Single motor dryers, like the HE3t dryer, cant do that.

    Joe

    P.S. When a duct cleaning is past due for me, I notice the dryer stops counting down the time at 11 minutes on the normal cycle, and at 8 minutes on the casual cycle.

  • 16 years ago
    last modified: 11 years ago

    I should say HE3 dryer - there is no such thing as an HE3t dryer.

    -Joe

  • 16 years ago
    last modified: 11 years ago

    Earthpal, Thank you for your email. I printed out the dryer vent chart information and will use this information if I do buy a new dryer which I will have to do if I don't solve this problem soon.

    Gates1, Maybe I can't get the over 20 year old vents clean enough and you are right that I need to replace them. I have a feeling no one cleaned them before I moved in. There were several owners of my townhouse since I have no fireplace so my place was a little bit less than the other expensive units. I live in Northern NJ where taxes and real estate are so expensive. I had clients that lived here and sold their home a few years ago that had a high mortgage and bought a home bigger with more land and have no mortgage in Ohio and are so happy. Many of my clients stay with me even after they move. I chose my home since I fell in love with the layout and modern styling of the townhouse as well as the perfect location to highways, the bank, the post office and to stores. The house did not have the location or layout that I loved but was the same price with a washer and dryer on the first floor with a short outside vent that I had no idea was important when I was looking for a home.

    I guess I will call a repair person to see if I need a new thermostat and see if they can help me better with either replacing the venting or cleaning it better since despite it being taken apart and cleaned, the dryer is working worse than ever.

    joe_in_philly (where I used to live when I was much younger), thanks for your input. Despite having my vents cleaned, maybe my dryer needs to now be cleaned out again and opened up again. I may have to clean out my vents every 6 months.

  • 16 years ago
    last modified: 11 years ago

    Lynn, I think having the dryer serviced an themostat replace just may be end of your dryer issues. LEt me know how it goes

  • 16 years ago
    last modified: 11 years ago

    Before rushing to replace parts, try running a load of laundry with the dryer vent disconnected at the back of your dryer. If it dries the load quickly, this will conclusively confirm that you have a vent problem and NOT a dryer failure.

    Easy to do and costs nothing. Just keep a nearby window open while running this test load.

  • 16 years ago
    last modified: 11 years ago

    Please don't run you GAS dryer if it is not vented.....unless you want to be sad story on your local news.

  • 16 years ago
    last modified: 11 years ago

    gates1, My older client friend came by today and opened the dryer again (did this in November) and vacuumed it and cleaned it very well and did the same to the back vent again and to the flexible hose that was just cleaned again in January. He feels I also need a better filter than the one that came with the machine that we vacuumed and was clean but must not be doing a good job to get that kind of lint in such a short amount of time.

    The machine still took a very long time to dry a light small load today so I am going to call a repair service to have my dryer serviced and the thermostat replaced. I sure hope you are right that this is what my dryer needs now and it really did need the dryer vents and dryer cleaned also. I am not ready to buy a new appliance just yet if I can get my dryer to work better.

  • 16 years ago
    last modified: 11 years ago

    Lynn, from what I have read and research, the thermostat is your most likely cause of it not heating up properly and taking WAY too long to dry a load of towel. The tech will be able to determine what parts are bad and need replacementment. It sure sounds like you have gone all through the most common diagnostics on your dryer. My gas dryer in its 7th year decided on the auto cycles to shut off rather quickly after I started a load. Of course they were not dry, so I switched it over to a Timed setting and it ran fine. I "googled" the problem, and found out that the Thermister was bad. This is the moisture sensor that determines how much drying is needed to complete a loud. I ordered the part which at the time was around 25-30 bucks, put it in and it has been happy ever since. I am lucky as my dryer sits right next to a venting outside wall. I might have about a 2 1/2 ft hose needed for it so its easy to clean. Unless your service Tech tells you that there is some major expensive issue with your dryer, I wouldnt replace it/ I really doubt that there are any issues with the gas burner system.

  • 16 years ago
    last modified: 11 years ago

    A typical bi-metal thermostat does not need to be replaced unless it tests as bad. Typically they either work, or not. If not, then the dryer either doesn't heat at all (thermostat stuck "off"), or it overheats (thermostat stuck "on").

    Thermistors are not moisture sensors per se, they're variable temperature sensors (effectively similar to a thermostat) used in electronic control systems. Thermistors work by electrical resistance. Lower/higher temperatures change the resistance value of the thermistor, which the control board reads for the air temperature setting. Air temperature of course has an effect on auto-dry performance. Thermistors also shouldn't need replacement unless they test bad. Diagnostic info for the machine should include a chart of temperatures and expected resistance readings on the thermistor.

  • 16 years ago
    last modified: 11 years ago

    Well obviously mine was bad, and after I replaced it, the dryer ran fine. When you take off the panel on my dryer, it has a tech sheet on it for a certified tech to use. Well I read the sheet, very informative, saved me a 100 bucks just for sears to show up on my door step. I agree that thermisters, thermostats shouldnt go out...neither should computer boards in less than a year, but guess what?? They do! Luckily I havent gone through that. Lynn has done all she can do for her dyer, now it is time for a service call, and hopefully it will be something simple.

  • 16 years ago
    last modified: 11 years ago

    I was only advising Lynn that parts shouldn't be blindly replaced without confirming they're bad. If she gets a less-than-honest service tech and asks specifically that the thermostat be replaced, the tech does so without testing it first or investing other possible issues, and that doesn't solve the problem, then she's back at square one.

  • 16 years ago
    last modified: 11 years ago

    So how exactly do you clean the inside of a dryer? I've vacuumed inside the filter housing as far down as I can get. I've also take the metal venting off the back and vacuumed in that as far as I can get.....Are there other areas in the dryer that need cleaning other than what I've mentioned?

  • 16 years ago
    last modified: 11 years ago

    Dadoes, please explain to Lynn and me what else she can do to improve her gas dryer performance??? Cause at this time, she as done all she can do..over and over again with no improvement. this lady is looking for answers and trouble shooting ideas, she has done them all, maybe she should pull a tech out of her back end next??? All I am doing is telling her what has happend to my gas dryer when it wouldnt dry properly and what fixed it. All you have said is not to replace parts, with no other solution. If you have a better idea, then please by all means tell her on here. I know it going to cost her about 80-100 bucks to walk in her door. But this lady is going to a laundramat spending money and not getting anywhere with her home results. Do you have a a Gas dryer? HE4? Mine is a HE3, it cant be that much different than hers, mine failed once, its fixed, so should hers, she deserves it!

  • 16 years ago
    last modified: 11 years ago

    In another thread I suggested that lynn2006 temporarily vent her gas dryer out the nearest window, to see how it works through a known good vent. If it works, then the dryer is ok. I'm skeptical about her vent really being clear. I mean, if there's airflow, along with any heat or even no heat, could the drying times be as long as she's seeing?

  • 16 years ago
    last modified: 11 years ago

    Additionally, has the vent hood or cap been examined for blockage or restriction? Running a load without the vent connected is the best way to get to the bottom of this.

    Opening a window or running a temporary vent hose out the window makes the most sense for the test cycle.

  • 16 years ago
    last modified: 11 years ago

    Where do I buy long temporary vent hoses? I would have to vent out to the back window since if the President of the complex sees me vent out to the front window, I am sure I will be in trouble. I would have to pass the middle bathroom, the steps, the long hallway and go through the back window so this would be a long vent also.

    Maybe I should just replace all the vents in the attic that are now a little more than 20 years old? I wonder how much that would be?

    I have still been sick so I am just reading this now and will try to read and post tomorrow in between clients.

    Gates1, thank you for caring. I do deserve a dryer that dries in a short amount of time and gets hot. My dryer never gets hot.

  • 16 years ago
    last modified: 11 years ago

    I'm hesitant to say anything further here because I apparently give bad/unhelpful advice ... but you need to somehow separate the dryer from the current exhaust system to pinpoint which is the problem. A clogged exhaust is one issue. A legitimate problem with the dryer is another separate issue, although exhaust trouble can potentially cause the dryer itself to malfunction. You may very well have had / are having problems with both, but no one on this forum can tell you exactly what is the problem without examining your dryer and exhaust setup or at least seeing pictures of it. Gas dryers are problematic to exhaust indoors due to the danger of CO*. If you OPEN WINDOWS and VENTILATE the area properly (perhaps with fans running to assist fresh air movement) during the testing, you could perhaps run a typical load exhausted into the room to see how the dryer performs. You'll need to run a length of flexduct to direct the exhaust air away from the dryer so it isn't recirculating the hot moist air directly back through the machine while the test load runs. You can find packaged lengths of flexduct (4', 5', 8', etc.) at Lowe's, Home Depot, Wal-Mart, etc.

    The exhaust air coming from the dryer should cycle roughly somewhere between 145°F and 165°F on the high setting as the gas burner cycles on/off to maintain the target temp. Running a dry load such as towels (on the timed cycle so the moisture sensor doesn't shut it off quickly) helps even-out the temperature swing.

    *My grandmother still heats her house with an open-flame natural gas heater, which isn't much different than exhausting a gas dryer into the room.

  • 16 years ago
    last modified: 11 years ago

    Lynn, maybe you could expalin your dryer situration to your comolex presdent and tell her that it the tempory vent would be just for a day to resolve your issue. Its true, if you run it unvented, you will need to have lots of windows open and this is not the time of year to do that, especially in NJ!! If you decide on replacing all the venting up through the attic, the labor will cost you more than the materials.Of coarse if you have some handy friends who know how to do it, a nice dinner either at home or going out may be a freat payment instead of spend that on a contractor. Some time this week, I will pull both my washer and dryer out, not looking forward to it either but I need to clean behind both of them. I am looking forward to the resolution to your problem. We recently had a house burn down here due to a malfunctioning dryer, so I try to stay on top of mine

  • 16 years ago
    last modified: 11 years ago

    Thank you dadoes and gates1 for more of your input. In between clients this week I am going to try to find a resolution and speak with the President also.

    I know someone in Massachusetts who took one of her dogs for a walk with her husband and came back to a burning house. Her other dogs died and her house was burnt down due to the dryer vent. She claimed she cleaned the filter every time. I never understood this but now I do from seeing how my venting was installed. I will make sure I clean the venting often and I will try to resolve the problem but it is probably more of a problem in the summer when the attic gets so hot. I am in the middle of my busy season and even have clients tomorrow. I was hoping to have this resolved before I got so busy.

    Of course, I am always drying clothes now and it delays me from doing another wash. I am afraid to see what my electric and gas bill will be next month. Does my gas dryer use both gas and electric since there is a plug?

  • 16 years ago
    last modified: 11 years ago

    Lynn your dryer uses a electric for the electronics in your dryer. If your dryer is not getting hot enough, then there shouldnt be a large gas comsumption either. The gas burner only comes on when the thermostats tells it too. So are all the vents clean now? Is it still taking a long time to dry the loads? If so, I'd suggest a service call on your dryer and let a professional diagnose any problems with the dryer.

  • 16 years ago
    last modified: 11 years ago

    gates1, My clothes are still taking hours to dry so I will have to call a repair person to come and diagnose the problem. I'll keep everyone updated. I still think I need a thermostat piece since the dryer gets warm but not hot.

  • 16 years ago
    last modified: 11 years ago

    Lynn, I agree that if the dryer just gets warm, a service call is in your best interest. I am curious to hear what the outcome is on it

  • 16 years ago
    last modified: 11 years ago

    Gates1, you were right that my dryer needed a thermistor and it is working now. I am glad I did not buy a new dryer. I never had clothes come out so hot before. Thank you everyone for being there for me and helping me. I copied and pasted the link below and if you scroll down to the end to today's post, you can read my update.

    I found the repair people when an older client left a message on my machine that she had an emergency with two wet loads of clothes to dry and wanted to use my dryer since hers stopped working. I called her back and told her that my dryer was not working and her clothes would take me all week to dry. She told me the repair men just left and she only needed a belt and the service call was only $87.99 plus sales tax. Hence, I called the number she gave me and they first canceled me due to being too busy and wanting to come earlier than they time they gave me when I had a client here in my home office. They they came back after the weekend ended with two men who got my dryer to work. I am so happy to have a dryer that works again. I should have called someone sooner but I had no idea who to call.

    Well, I better get back to work as I do my laundry at the same time since I have no clients here today so I am working on projects that they dropped off.

    Thank you!

  • 16 years ago
    last modified: 11 years ago

    Im glad you got your dryer fixed, and saved you some money by not buying a new one. So many people replace a dryer when the repair is not that expensive to have done. Granted, you paid just over 300.00 for a repair, but that included cleaning out vent pipes. Well worth the money spent, now you know they are clean and not a fire hazard.

  • 16 years ago
    last modified: 11 years ago

    gates1, Thank you for confirming how I feel that the money was well spent to not have to buy a new dryer right now when mine is only a little over 5.25 years old and matches my Whirlpool Duet Washer that is working. I also was happy they cared enough to go into the attic with me to finish the cleaning the vent job so they will not be a fire hazard.

    I am still so amazed at how fast everything is drying.

    Right now I am cleaning all the petite dog beds (4 lbs to 9 lbs my dogs range that do not shed) and drying them. Tomorrow I will clean my fitted sheet and pillow cases to try the sensor out that never really worked even when the machine was new.

  • 16 years ago
    last modified: 11 years ago

    Yay! Lynn, honest truth, I was wondering earlier this afternoon what was the resolution.

  • 16 years ago
    last modified: 11 years ago

    Watch out now, Lynn will be washing everything now :)

  • 16 years ago
    last modified: 11 years ago

    Gates1, you are so right that I am washing everything right now and I am amazed at how the clothes are now less wrinkled and if they come out with some wrinkles, I put a few back in on low to take out wrinkles like I used to do when I first got the machine about 5 years and 4 months ago when my other Whirlpool machine set both totally died on me and the repair guy said it was not worth fixing due to their age and the cost for the parts.

    The sensor feature never worked on the machine but I was going through a tough time with so many problems and deadlines that I was just happy the clothes dried on high or medium timed.

    But with this recent repair, I feel the machine is working better than it ever did so now I am ready to try the sensor feature on my next load. First I wanted all my clothes clean and with new dirty clothes, I will be more willing to try the feature hoping it does not take long.

  • 16 years ago
    last modified: 11 years ago

    Thats great Lynn, I dont think you will find it an issue using the sensor dry mode, or that it will slow down the process. In fact, it may not take as long to dry clothes, in the event that you are setting the timed dry cycle too long. If your dryer as the damp dry feature like mine does, this is great for clothes that you do not want boned dry or if you plan on ironing them afterwards.

  • 16 years ago
    last modified: 11 years ago

    AS odd as it sounds, I've never used that auto feature on my dryer, I just use time dry. The auto feature seems to run longer for some reason......Say, if I put it on timed dry (high heat) 45 min's, the clothes are about dry like I want them.....If I use auto dry, it seems to run a lot longer....I can set it to auto dry (medium dryness level) and they aren't dry enough...I set it to auto dry ( more dryness level) and it runs longer but they are too dry....I've just memorized how long it takes particular loads to dry the way I want them and use timed dry.

  • 16 years ago
    last modified: 11 years ago

    Mark, I will check into that feature, I havent noticed it on my dryer to take longer,, mine is gas, not sure if that matters or not. Off hand, the only reason I can figure that it takes longer, is that when I dry on auto dry, my clothes do not come out of the dryer "hot" It seems the more they dry, the sensor protects them from drying out, thus reducing the dryer temp. Im not sure it I explanied that right.