Software
Houzz Logo Print
panamamike

Most expensive washing machine repairs?

16 years ago

Looks like my trusty Kenmore FL of 9 yrs. is going to fail on me. Sounds like a bearing problem, I hear a loud noise during the final spin cycle.

From the posts I've read the repair is not worth doing because it close to replacement cost.

I've been shopping and it's amazing to see the variety of products out there in FL. In 2000 the choices where pretty limited. Now there's quite a bit of options as well as some astronomical prices.

I'm interested in Steam washing as well as some of the more advanced vibration reducing technologies. They happen to come with a premium cost 2x what a regular washer would cost. That coupled with the 11 year expected lifetime for a FL, I'm wondering if it's worth the extra $$$ for the additional gizmos.

Given my experience, I'm trying to determine what things I should look for in a washer, and what I could expect for the regular washer warranty to cover in the case of a failure. I now know about the bearing issue, but are there any other major repair gotchas I need to be thinking about?

Right now I'm thinking the 10 year DD motor warranty on LG would save me from the bearing issue. Are there other big repairs that would make that coverage moot because they could occur after a year of ownership, before 10 years, and not be covered by the motor warranty?

Mike

Comments (12)

  • 16 years ago

    Guess the 10 years warranty covers just the motors, not bearings.
    I'm rather skeptic about steam : not a case commercial washers don't use it, unless they are *steam heated*

    If you want a sturdy frontloader that overlast 10 years get a Speed Queen with internal heater or a Miele


  • 16 years ago

    That would be a good question to ask regarding the bearings. Figured they should be part of the motor.

    As far as Miele/Speed Queen. They are a bit out of my price range.

    Mike

  • 16 years ago

    The bearings and the spider are the weaknesses of all of these FL washers with the exception of Miele or SQ. The electronics are relatively inexpensive and easy repairs, but the bearings and the spider, not so much. Funny how they give the stainless steel drum a LIFETIME warranty and we're all like "COOL"....what we don't realize is that drum warranty doesn't mean SQUAT (LOL)

  • 16 years ago

    >Figured they should be part of the motor

    Of course even the motor has its own bearing, but those ones that are prone to wear are on the outer tub where is the motor-to-drum shaft (LG) or pulley-to-drum shaft (other FL). They have to bear the whole load + drum weight

    One wonders why appliances were more reliable in the past.
    We forget that washers back in the seventies costed one to two montly salaries, while today it's in most cases just a fraction.

    If you compare same sized residential to commercial frontloaders, you'll notice that the bigger means bigger price difference.

    A 24" commercial frontloader costs four to sixfold than an average 24" residential machine. Bigger the machine, bigger the price difference residential vs commercial.

    If you compare them in the previous links, Electrolux commercial machines have nothing else to share with their residential siblings than being frontloaders. Commercial E'lux have same build quality (..and price) as Miele

    Both commercial and residential Speed Queen and Miele machines share several same parts, that's why their residential washers are more expensive than average

  • 16 years ago

    Well, that's a shame. Wonder if it's worth the $$$ to buy the Miele or Speed Queen. How long could one expect those machines to last over a lesser quality machine?

    I'm guessing getting a midgrade machine would be a good bet.

    I checked with LG and they confirmed that they don't cover the bearings :(

    Mike

  • 16 years ago

    Hidroman, I didn't know about those commercial machines. But I didn't look for them either. I would love to have one of those in my house-after my LG dies, but is it worth the money for just 2 people? The 11-13 kg would be nice.
    I guess I should start saving money since I should expect to pay 6-8 grand for it?
    Do they all have internal heater? Are they 110 or 220?
    Sorry, I chcked out only one. Would it last for the rest of my life?

  • 16 years ago

    I am in the market for a new washer/dryer and after extensive researching and reviews have decided on Speed Queen. Check out this site and scroll down for ratings:

    http://www.allbrandservicenaperville.com/products-washer.html

  • 16 years ago

    Czechchich .... it's really no worth. In Germany a used five year old 13 Kg Miele PW6131 is priced 6750 euro ... go figure what about a brand new one. It costs as a small city car

    In the USA these models are three phase 220 Volt- (here they are 380 Volt only)
    Also this machine weights 750 lbs ...

    The cheapest brand new 24" commercial miele costs round 2400 euro. It would fit better american laundry habits : for a 140°F cycle just 49 mins (starting with hot fill) or 59 mins starting with cold fill .... but it has a 5300 Watt heater and a double price than the average middle of line residential miele

  • 16 years ago

    Among less than tank status washers. Are there any washing machines that are easy to service thus costing less to replace bearing/spider assembly to the point of being cost effective?

    Mike

  • 16 years ago

    Miele are suppose to last 20 years, the price is around 2 grand give or take. I guess my He3t is suppose to last 10 years and I paid 1100 for it and its 9 years old and still running, so I am not sure if its better to pay more for a machine or not for the long life expentancy. It seem like so far I am not in a loss at this time. Of course since I said that, my washer will drop dead tomorrow LOL

  • 16 years ago

    Funny thing, I was recently doing searches on the OASIS/Cabrio washing machine model to help my in-laws with a washing machine buying decision.

    I was trying to steer them towards a FL and telling them how mine has lasted for the last 9 or so years.

    Guess what? To my chagrin, it now has this bearing noise and about to die on me. I just wish I knew how much time I have until complete failure.

    Mike