Software
Houzz Logo Print
lisa98112

cleaning metal registers

20 years ago

Since you guys have such great advice on these matters thought I'd ask for some more help.

When we installed a new furnace, we decided to reuse the original wall heat registers. I have successfully stripped the paint off of them and now am trying to clean, polish, and seal them. I've used mineral spirits and metal polish on one. It looks like copper but is magnetic, so is some sort of ferrous alloy or perhaps copper plated.

Do you think using steel wool will harm the copper? Right now it is really brown and dull in spots.

Comments (8)

  • 20 years ago

    we have older metal iron registers. They are ornate. Are yours similar to these?

    http://www.historichouseparts.com/vintage_heat_grates_inventory.htm

    When we stripped the paint off them they had a silver metal paint over the original metal however the paint had been worn off on spots. We used steel wool to tidy up the register some more and then repainted them and they turned out really, really nice.

    My husband actually bought a spray paint that looks like the silver finish.

    So ya, now on to your question:

    If your "copper" finish is similar to my silver finish then yes, the steel wool may loosen the finish. I would try the softer pads instead of real steel wool.

  • 20 years ago

    Found mine exactly, linked below. We considered using a spray paint from the Rustoleum brand and to repaint the ones in the bathroom and master. Debating between white or chrome paint or none at all.

    Do you know what brand of paint your husband used?

    Here is a link that might be useful: {{!gwi}}

  • 20 years ago

    Hey! One of mine looks just like that!

    I do think he used rustoleum.
    He painted one silver colored, and another black. They both look beautiful!

    He said his trick for spray painting is doing a lot of light coats. He is very good at it.

    If you are repainting a color make sure you use a stiff wire brush and scrub all the loose paint off. Some of the paint looks like it is stuck on, but it comes right off when you use the brush. After that I think my husband primed with a rust preventer (it ended up being a greyish color) and then he did the final colored coat.

    We chose the color based on what color we thought the grate used to be. When we stripped the old paint off one grate it looked to be a silver color, the other looked to be a black color. The grate we have, that looks like yours, is black. It is in nice shape so we didn't have to touch it. It looks original and never repainted.

    -renee

  • 20 years ago

    If you want to do it in a big way, my friend (who has a Craftsman house) cleaned his registers and took them and had them replated. A couple he had chromed (like they do with car parts), and a couple of others he had done in a coppery/gold light color. They are exquisite now. Oh, and he did have them lacquered.

  • 20 years ago

    Thanks for all the input. I found that the copper plate is very thin and some rubs off with metal polish. I called a few metal finishers and they quoted $100-125 each to clean and replate them for me in either copper, nickel, or brass. I was told that brass or bronze are probably the original finish for the time period for public rooms and that nickel was likely in the bathroom and kitchen. Debating if we want to spend this kind of money or just use the Rustoleum for a faux painted finish.

  • 20 years ago

    Those replated ones are to die for....

  • 20 years ago

    I used metallic bronze rustoleum-- to keep the cast iron look.

  • 20 years ago

    You might want to try some Rub-n-Buff. Comes in a tube. You get it at the craft store. Like Joanns or Micheals. A little goes a long way. Comes in gold, silver , copper etc and in colors. Or you could try some gold silver or copper leaf. The instuctions on both will tell you what color to paint your base coat.

    Ive done both. They hold up pretty good if you clear coat them. If you have real fancy registers you can paint them black and then high light the fancy bits with Rub-n-Buff.

    Here is a link that might be useful: Rub n Buff

Sponsored
CHC & Family Developments
Average rating: 5 out of 5 stars6 Reviews
Industry Leading General Contractors in Franklin County, Ohio