Software
Houzz Logo Print
jairosmom

Ship lap or other paneling

11 years ago

I'm in need of additional help.

I desperately want the look in this photo in my home. I'm looking to put it in the entry area, over the fireplace, in the half bath, and in the master ceiling, and perhaps the kitchen ceiling as well. I do not like the look of tongue and groove, which is what everyone in my neck of the woods is familiar with.

How do I communicate what this product is? How is it created?

Also, now that we're most likely adding coffers to our living room ceiling to help disguise a HVAC run, will the ship lap type paneling look funny above the mantel? Are these two treatments from architectural styles that are not complimentary to each other?

Comments (22)

  • 11 years ago

    Here's another example.

  • 11 years ago
    last modified: 11 years ago

    Hi Michelle1973,

    We have that kind of wall treatment. If I recall correctly they used square-channel shiplap (poplar). If you want something easier to clean, consider v-groove. I'm pretty sure I did ask for v, but we ended up with the square and I like the way it looks.

    Please keep in mind that if you want the wall treatment to be the base as in your first photo, you'll need close coordination with the flooring folks. We were able to get that look in the bathroom, but didn't plan ahead sufficiently in the living/dining, so we ended up using doorstop as a mini-base (I thought that looked better in the room than quarter-round or shoe molding).

    Here it is in the bathroom:

    {{gwi:2132873}}

    Here it is in the entry (notice the molding strip at the base):

    [DELETED]

    Also, for kicks, here's a link to a blog piece with some nice photos.

    Good luck!

    Here is a link that might be useful: Remodelista on shiplap

    This post was edited by Oaktown on Mon, Feb 2, 15 at 16:21

  • 11 years ago

    Oak town, awesome, thank you! LOVE your ship lap, it's gorgeous. And the blog was very helpful as well. Dumb question.....does the ship lap get placed over drywall? Or can it be used instead of drywall?

  • 11 years ago

    Ours is over drywall. We didn't decide definitively to add paneling until later in the building process, but our contractor said we would have needed drywall in any event due to fire dept requirements. (We're also required to have a sprinkler system, so maybe we're just in a lucky jurisdiction.)

  • 11 years ago

    Ours is 1x6 pine. It's attached directly to the framing, but we only used it on ceilings. We used V groove on the porch ceilings, because I thought it looked a little more formal and suited the front of our house better. We used a butt joint on the kitchen and hall ceilings. It looks more rustic, because as the wood expands and contracts the joints aren't uniform. I LOVE this look. The trim carpenters did both with the same material; one side for v groove and the other side for the butt joint, which the carpenters called center match.

    This is the kitchen ceiling.

  • 11 years ago

    The v groove on the porch:

  • 11 years ago

    We have v-groove on our porch ceiling as well. I hadn't noticed.

    Shiplap and coffers? We have some boards running perpendicular to the shiplap on the ceiling, but they're definitely not coffers. I used to just call them "seam-hiders" :-) So I searched for some images of various combos, what do you think?

    {{gwi:2133673}}

    [Beach Style Family Room[(https://www.houzz.com/photos/beach-style-family-room-ideas-phbr1-bp~t_720~s_2110) by Other Metro Home Builders Borges Brooks Builders

    {{gwi:2133674}}

    [Beach Style Dining Room[(https://www.houzz.com/photos/beach-style-dining-room-ideas-phbr1-bp~t_722~s_2110) by Boston Photographers Mary Prince Photography

    {{gwi:2133675}}

    [Tropical Entry[(https://www.houzz.com/photos/tropical-entryway-ideas-phbr1-bp~t_741~s_2108) by Charleston General Contractors Structures Building Company

    {{gwi:2133676}}

    [Traditional Kitchen[(https://www.houzz.com/photos/traditional-kitchen-ideas-phbr1-bp~t_709~s_2107) by Alachua Cabinets & Cabinetry Busby Cabinets

    {{gwi:2133677}}

    [Traditional Bedroom[(https://www.houzz.com/photos/traditional-bedroom-ideas-phbr1-bp~t_715~s_2107) by Madison Architects & Building Designers Destree Design Architects, Inc.

    {{gwi:2133678}}

    [Traditional Kitchen[(https://www.houzz.com/photos/traditional-kitchen-ideas-phbr1-bp~t_709~s_2107) by Lubbock Kitchen & Bath Designers B&S Woodworking Inc.

  • 11 years ago

    Jackson,

    Could you show a picture of the ship lap and your entire kitchen? I just have to see more. :)

  • 11 years ago

    Here you go mom2sulu. These are from Christmas.

    {{gwi:2133679}}

    {{gwi:2133680}}

  • 11 years ago

    We have some shiplap in almost every room in our new house. I whitewashed it instead of painting it because we wanted some of the grain to show through. Ours in SYP that we got from a local mill. It's 1"x8" I believe. We installed it directly over studs. We have beadboard on the kitchen and porch ceilings and shiplap on the walls.
    We're still moving in, but I'll post a couple pics, please excuse the mess. :)

  • 11 years ago

    One more of the living room.

  • 11 years ago

    Beautiful sweet tea!

    Oak town thanks for digging up the pics with both finishes....they look good!

  • 11 years ago

    Jackson, Gorgeous! Thanks for sharing!

    The ship lap is actually lovely in all these homes--really warms the rooms.

  • 10 years ago
    Sweet_tea_ I'm building a house and doing the whitewashed shiplap as well. I want to also keep it behind my stove. I wanted to ask how its working out for you...is it easy to clean? Has it been stained from cooking? Grease splatters? Im determined to keep it there, but was wondering if I might need to put glass over it? Thanks!
  • 10 years ago

    rhondave-

    I was actually worried about that myself, but we've been in the house for a little over a year and it has been super easy to take care of. I couldn't be happier with it! We don't often fry, except we do usually fry some bacon every Sunday morning, but the grease splatters just wipe right off, same for tomato/pasta sauce, ect. And the splatters don't leave spots, stains or residue. It looks just the same today as it did when we moved in. Ours is southern yellow pine that I whitewashed with SW Marshmallow HGTV paint, 1/2 paint- 1/2 water. Love it! Good luck!

  • 10 years ago

    Oaktown...your pics aren't availabile. Would you mind showing them again?

    I love this look too. Beautiful pictures and great thread. Thanks to all for the pics.

    here's my ship lap (pine stained VERY dark)

    in the house we just tore down. It was 3" thick and very old. No insulation behind it. The v-groove pine I beIieve. I thought about trying to salvage it and have it refinished but I didn't think it would be worth it.

  • 10 years ago

    without the sheetrock behind any of these examples, you will

    be building very leaky walls.

    lots of air infiltration into the house causes issues,

    such as lack of comfort due to hvac system having to

    overcome the air infiltration & higher utilities.


    you should check with code for your area, as the sheetrock

    provides a fire rating that wood lacks.


    best of luck

  • 10 years ago
    last modified: 10 years ago

    Energy rater...our lake cabin was definitely full of leaks. A summer place only, freezing in the winter. Thank you for the information.

  • 10 years ago
    Sweet tea, thank you so so much. Ours is eastern white pine and I plan to have them do the 50/50 paint as well, also a sw color. Agreeable gray...which is very very light. I am so glad I found your post and grateful you responded. I wanted to keep it behind the stove but have fretted. Now I feel confident! Thanks again!
  • 10 years ago

    rhondave- Sounds lovely! I love white pine, sadly it's just not locally available for me. Best of luck and glad I could help out.


    Energy rater- Our shiplap in not installed over sheetrock, there is not a local code requiring it. However, we did use open cell foam insulation in all exterior wall and ceilings, and fiberglass for sound bats in all interior walls. Our house is very tight, no air leaks, just shy of 3000 sq ft heated/cooled and my highest energy bill was $212, average monthly bill is $150. I'm completely happy.

  • 10 years ago

    in your case, the foam makes the air tight seal that in conventionally

    insulated walls/ceilings would lack without the sheetrock.