Software
Houzz Logo Print
kaliel

Window Treatment Help

13 years ago
We are in the process of ordering woven wood shades (hobbled roman) for our master bedroom and curtains. The question I have is, since we have 3 windows all in one section, do we order 3 separate shades of the same design for each individual window or one big one to cover all 3 windows. Initially our designer and I had decided to do 3 separate ones, but now they are saying we should do 1, so I'm not sure what I should do. The price difference is minimal. This is the window and the wood shades to get an idea of the space and material. Please excuse the picture, it was from when we first moved in.

Comments (22)

  • 13 years ago
    One shade can be cumbersome to lift up and down straining the hardware over time but with 3 it's difficult to get all 3 shades at the same level unless you will raise them completely up or down...halfway up or down you can drive yourself crazy trying to get them even.
  • 13 years ago
    I think trouser length cutains would be nice on that window. It would give the room some romance.
  • 13 years ago
    For versatility of raising and lowering just one or two of the windows, go with individual ones. Sag might be expected with a heavy single shade of this width.
  • PRO
    13 years ago
    Are you only putting blinds or are you also adding panels to the sides or some other fabric treatment?
  • 13 years ago
    We are adding panels on each side also.
  • PRO
    13 years ago
    The 3 shades would be nice fitted inside the window frame, but useing 1 big shade would allow you to hang the shade a lot higher than the top of your window frame. Hanging the shade high creates the illusion that your window is larger than it really is and when the shade is up you don't block any of the natural light comeing into the room as a stack of roman shade can. Place one big curtain rod over the top and your drapery panels on the sides and all of a sudden your window will appear huge! I wouldn't be too worried about raising and lowering the shade if the manufacturer feels comfortable makeing it in that size. You can also ask for a continuous cord loop system to raise and lower that makes it al lot easier!
  • PRO
    13 years ago
    3 shades 1 will be really heavy.
  • 13 years ago
    We will be adding the panels after I see what the shades look like installed, and those will be from tray ceiling to floor to make the window look bigger. That's about the only thing I know about designing window treatments ;) We decided to go with the 3 individual shades and I appreciate everyone's input to help make this decision! This room has only had new bedding added to it since we moved in, so we have a lot of work to go in here!
  • PRO
    13 years ago
    last modified: 13 years ago
    Depending on the width, if you really want it as 1 blind you can order it with a Continuous Cord-loop Control (making sure you use a hold-downs at the bottom of the loop for safety!). This takes the stress off the components, help you avoid light gaps between the blinds in your bedroom as well as trying to keep all three blinds at even heights. If it is mounted into a solid spot, the weight shouldn't be an issue. Requesting a center support can keep the blind from sagging in the center as well. If privacy is an issue, try requesting an attached privacy or blackout liner (even though with the sample it looks like a relatively closed weave) as people will be able to see in through that blind at night if you have a light on in your bedroom.
  • 13 years ago
    last modified: 13 years ago
    I think maybe one blind otherwise you may get light gaps? Something to really consider especially since it is a bedroom.
    Will you have the blind fitted inside the windw frame or outside on the frame?
    The blinds you have chosen seem very dark?
    Have you considered a Roman blind ?
  • 13 years ago
    Ps it is a very nice window shape.
  • PRO
    13 years ago
    In this case, I agree with "Lagnappe Custom Interiors" I would do 1 shade, mounted above the window with drapery panels hung on each side off the window just covering the edges. When they are open you would not raise them all the way up..just enough to leave the top frame covered so the window looks really big. Also, make sure you have the lined. I have woven woods this size on my lanai and I can lift them quite easily. If you do individual ones there will always be light coming in around the edges.
  • PRO
    13 years ago
    last modified: 13 years ago
    Absolutely one shade. Ask for it with a clutch control and lifting is no problem. 3 is a downright nuisance as they will never be at the same level. When you get around to it add drapery panels over the window...they can be stationary only.
  • PRO
    13 years ago
    From the looks of it your window looks quite large I would recommend going with 3 blinds with 1 head rail at the top. This way you ensure that the blinds are not too heavy to lift . By putting 1 large blind you run the risk of the blind being very heavy and the cord would break more often.

    http://www.blindsdirectcanada.com/
  • PRO
    13 years ago
    The answers above all get to the issues.
    The question you need to ask yourself is "how do you intend to use them?" -And given the issues what is more important to you? The problem here is the same for many of the "blind-Type" window treatments. a)" One Big Blind" across that space: Negative: mighty heavy to raise and lower. And the strings will "fray"... -And quickly, if you don't do it properly... and virtually no one does. However, maybe you have no intentions of raising the blinds except on rare occasions? B) three individual blinds... side by side. Negative: they are not going to line up perfectly... one slat to the next, from blind to blind? Do you care? Some it would drive crazy... others could care less. Also, there needs to be a small gap between the blinds. Is there a serious "privacy issue" you need to be concerned about? -Because if there is there is a good chance someone will be able to see in the window. -And then there is that "pesty" center cord. Some it drives crazy.... some people, it's not an issue.

    The scary thing is we haven't even addressed the issue of whether you desire an inside mount or outside mount. -And that sometimes is the most important aesthetic issue of all. It's not about price... it's about form and function. How are you going to use the blind? -And if you must compromise the look you want to get the function you need are you going to be happy?
    With all the answers people have given you above, I think you can open up this conversation with your designer. He or she has put eyes on the total project and should be able to expertly guide you through this decision but what do I know, I'm in the lighting business!
  • PRO
    13 years ago
    What is the width of your window? One shade will NOT be hard to lift...whether inside or outside mount.
  • PRO
    13 years ago
    Hey Julie, your right! I assumed they were full sized single width windows... they very well may not be?
    Good question... eyes on project AND/OR smart questions will help you through.
  • PRO
    13 years ago
    Shades of Light...do you put out the catalog??? If it is you I like your lighting selections.
  • 13 years ago
    For those who missed it:

    "Kalie L,

    We decided to go with the 3 individual shades and I appreciate everyone's input to help make this decision! This room has only had new bedding added to it since we moved in, so we have a lot of work to go in here!"
  • PRO
    13 years ago
    Julie, yes we do (see icon beside my "comments" for the latest cover... if your eyes are younger than mine. LOL
    -And thank you very much for the compliment, that was nice of you to reach out.
  • PRO
    13 years ago
    Eyes are probably not younger than yours..... good to see you on here then. will follow!