Software
Houzz Logo Print
hzdeleted_9754417

Cast Iron Pan Storage -- found a winner method -

11 years ago
last modified: 11 years ago

I got 2 of these to see if one was better than the other. If you store it sideways, there is no difference. So get the cheaper one. If you store it upright as intended, the Rubbermaid has a plate and you can screw it down for more stability. I plan to store these in a drawer with 12 inch clearance. Pardon the junk behind. Emptying out the kitchen and thinning the herd. The last picture is in a drawer with 20 inch effective length. I will have heavy duty rails, but don't plan to have all the CI like that -- will put my in All-Clad skillets in-between to spread out the weight. One holder is a bit ahead of the other, which allows the handles to next in the other side.


Comments (14)

  • 11 years ago

    Nice! I keep mine nested, and my most often used 12" is usually on the cooktop. Your way is more accessible :)

    User thanked Errant_gw
  • 11 years ago

    That's one sturdy drawer! I use a similar item, for files from the office store, for my cooking and baking pans, but I don't know if it's spaced to accommodate your pans. Yours holds taller ones. Nice!

  • 11 years ago

    sturdy drawer - you bet. The drawer you see is about to hopefully be gone and replaced with drawers that will hold them. Cabinet guy deserves a gold star. As I said, they won't be like that in the end. I will spread them out with the lighter All-Clad to spread the load over 2 drawers. We really do use them all.

    Someday -- I will have a 20 inch - the Holy Grail for me. Every yard sale I stop at, I hope and pray, but no luck yet. We are doing a new kitchen and I am thinking we will get a 20 when it is done. This is most likely our "last kitchen."

    Embarrassed to say that isn't the whole herd... I can never pass up an old CI. I do give a lot away after I find them for cheap and re-season. Amazing cookware. GREAT with induction. They used to be junk and I could get them for next to nothing -- all rusty. So easy to re-season. The secret is out now...

  • 11 years ago
    last modified: 11 years ago

    Yes, that's a great way to store pans of any kind.

    I store my pitiful collection of cast iron (2 pans) vertically like that in a tray divider. Ditto my cutting boards and pizza stone. $7.95 (I think) from Walmart for 2 dividers.

    I also use the tray dividers for trays/cooling racks/cookie sheets, etc.

  • 11 years ago

    I still wish I could go back in time and slap myself upside the head when I put my grandmothers Griswold in a garage sale because "it was old and gross"


    Ahhh, wish I had known then what I know now.

    I only have one CI, but my husband uses it for everything!! I need to find a smaller one for him to use when he is cooking his eggs. No reason to dirty up my 12" for an egg or two.


    Great storage solution though! This is why I love GW, always seeing great ideas and solutions pop up like this.


    Thanks for sharing!

  • 11 years ago

    re: 12 inch. Those are our best size go-to skillets. For cleaning, we use something called The Ringer Cast Iron Cleaner XL 8x6 Inch Stainless Steel Chainmail

  • 11 years ago

    My cast iron pans came from my grandparents (and I'm 54 - these are some old pans). We use them almost daily.

    DH and I love to give CI as wedding gifts!

  • 11 years ago
    last modified: 11 years ago

    Nightowl - I gotta try that Chainmail cleaner! Never saw it before - thanks.

    I only have 2 cast iron pans. I bought them as a poor college sophomore, and I am now fifty-achoo. I love those 2 old cast iron pans, but I admit reaching more frequently for my LC enameled cast iron fry pans - just as heavy and even-heating, but much easier to clean.

  • 11 years ago

    How deep are your drawers, and how wide are your pans that they can fit? I measured mine, and only the very smallest pans will fit side by side like that it my drawers.

  • 11 years ago

    I have that same divider, but mine's white and came from Walmart. I don't use it for my cast iron frying pans, but I do like it.

  • 11 years ago

    Frieda -- if your pans are well seasoned, they shouldn't need much more than a bit of boiling water in them after you are done and then a swish of an abrasive something. Then wipe out with a paper towel and a bit of olive oil in them. Return to a warm oven or very low burner to set the oil. No Soap. Ever.

    Carrie -- the drawer in the photo is my current drawer, not tall enough. I was playing around when I took the photo. The drawer is 20 inches long by 10 deep in the photo.

    My new drawer will be 23 inches long and 12.5 inches deep. How they go side by side like that is because the two trays are staggered, not directly lined up. If you look at the drawer photo, the first pan on the front left (down stage right) is in the gap created by the front tray sitting ahead of the back tray by about 2 inches. No space is lost because the gap in the front left is filled and the gap in the back left can be filled because the tray in the front will support the handle and keep the pan front falling forward.

    We have two deep drawers planned. The CI and lighter All-Clad will be mixed to spread the weight. I have a 14 inch that won't fit of course, but that usually sits on the cooktop with a favorite 12 inch nested in it. We don't need them all, but if they sit and don't get seasoned, they rust. Our kids will get them when they finally settle down.

  • 11 years ago

    I have the Rubbermaid one. Reviews showed it to be sturdier than than the similar versions. I wanted something that could be use upright so my pans would have the air circulation around my cast iron. I keep mine on the counter next to the range.

  • 11 years ago

    I have one from Ikea. Holds my frying pans and a grill pan. It's handy storage.