Software
Houzz Logo Print
dale92539

Possible Simulation of Deeper Growing Containers using Vertical Wicks

I have read previous posts about eliminating
Perched Water Tables from Containers with wicks. Also that water content and
tension varies thru the profile of the growing medium. The lowest tension in
the bottom 0 KPa and increases with height approx at 0.1KPa per cm. Some
Nurseries use a Capillary Mat covered with root blocking fabric to drain
shallow seed plug trays. The Capillary Mat over hangs the growing bench to drip
excess water.

Theoretically it should be possible to simulate
deeper containers by placing shallow container on wicking mat or other wicks with the
desired vertical length. But the water tension would be duplicated for
the upper portion of a deeper container. It should be possible to customize water
holding capacities of any mix.

Comment (1)