Software
Houzz Logo Print
jonathan_eisenberg

Speed Queen - Digital or Manual

10 years ago

Hi Everyone,

I was discouraged about finding a quality washer/dryer until I found Speed Queen! To think I had never even heard of it! Now, I'm ready to make the purchase but I am conflicted between the digital series or the manual. Is it worth the extra $ for the digital? Is it a bad idea to go with the digital washer and the manual dryer? Any thoughts would be appreciated!

Comments (14)

  • 10 years ago

    What I am really asking...would a digital washer paired with a manual dryer look objectionable in the mud room? I would love to save the $.

  • 10 years ago

    It sounds like a mismatch would bother you. So I say spend the extra money.

    Jonathan Eisenberg thanked suburbanmd
  • 10 years ago

    Jonathan-The digital models have a full five year warranty, where the dial controls have full three year warranty. Also, with the digital model dryers they have a moisture sensor(in drum I think) plus the ADEE9RGS173TW01 offers the extended tumble at the end of the cycle if you are not there to remove clothes right them and also offers Eco-Dry. The dial model dryers may offer moisture sensing but if so I believe it is through the exhaust but I don't think SQ list those dryers as having moisture sensing on their website. Go to SQ site and compare both washer and dryer and see what they list.

    Jonathan Eisenberg thanked sparky823
  • 10 years ago
    last modified: 10 years ago

    "The dial model dryers may offer moisture sensing but if so I believe it
    is through the exhaust but I don't think SQ list those dryers as having
    moisture sensing on their website."

    That's because thermostatic auto-dry is not true moisture-sensing. The timer advances when the heat source cycles off, does not advance when the heat source is engaged. Moisture level is not sensed directly but rather is inferred on the premise that evaporating moisture keeps the exhaust air cooler so the heat source runs longer to reach and maintain the target drying temperature ... a large load, heavy fabric, wetter items extend the drying time by way of needing more heating time to reach the target exhaust air temperature.

    True moisture-sensing involves contact bars in the drum. Damp clothes touching across the bars complete a low-voltage electric circuit which the control board reads to interpret the dryness level of the load.

    Jonathan Eisenberg thanked dadoes
  • 10 years ago
    last modified: 10 years ago

    @laundryvet You convinced me (and more importantly, my wife). We went with the digital. Thank you!

  • 10 years ago

    Which model did you get? They are all the same build wise, just more or less settings depending on what you need.

  • 10 years ago

    Hi @sparky823 - I ended up going with the AWNE92SP113WH washing machine and the ADEE9RGS173TW01 dryer. I got a good deal on it too. If anyone is interested in what I paid, feel free to PM me.

  • 10 years ago

    You will enjoy those. Great model. Thanks for sharing your model #'s with us. Also, glad you got a good deal. I know that didn't hurt either!!

  • 9 years ago

    Jonathan, I can't figure out how to pm you about your speed queen AWNE92SP113WH washer and dryer. I need new washer desperately and feel like speed queen will be most reliable (I like top load and water I can hopefully control). I originally thought manual controls for sure. I would love to hear how you're still liking your machines (assuming you see this). And if anyone can tell me how to pm, I appreciate it! I couldn't find pm option on profile page. So I'm obviously missing! Thank you.

    Oh,mom also curious how the SQ does with cold water/gentle cycles. It has only one spin speed I believe. I do a lot of gentle cycles unfortunately and don't want to ruin clothes of course. And hoping the machine doesn't twist expensive linens/sheets up.

    best,

    amy

  • 9 years ago

    Typo above - I meant I am also curious how SQ does with gentle loads. Thx.

    i don't think Jonathan is on houzz anymore....

  • 9 years ago

    They need to follow you in order for you to PM them.

  • 9 years ago

    Hi Amy, I am moving from the DC area to San Antonio this fall where I am building a house. I have had FL washers since 2001 and have made the decision to buy the Speed Queen TL. I will be doing the manual control washer with the electronic control dryer. The main reason I chose the manual control washer is the ability to add as much water as I may want to for a particular load (by using the reset on the water level). I know I have to buy a SQ washer that has been manufactured during 2017 so that I get hot water based on our water heater setting rather than the mandated energy savings that I have read SQ may be forced to use for the 2018 models. Also, the specs indicate that the SQ has two motor speeds so that should indicate a slower spin speed for the delicate cycle. I will attempt to confirm that but someone else here knows definitively I am sure. Good luck.

  • 9 years ago

    Hi armjim! That is funny (in my head) because I was considering the same thing! Mechanical for washer and digital for dryer. I like the moisture sensing and air dry at end. But want washer to last as long as possible and despitebthenlonger warranty,nthe digital board on a washer still worries me for repairs after 5 years... I didn't think the new-ish 432 has that reset button to add water.mplease correct me if I am wrong! Hope I am wrong. I thought they removed the reset button and you had to go under 'hood' and turn screw to change h2o level. But the reset button would be great. I'm going to showroom tomorrow and will check for sure.

    And yes,my here are 2 speeds in washer like my old top load. So maybe I am worrying for nothing. I put delicates in lingerie bags usually for extra protection (covered zippers on lingerie do bags).


    Thnaks to to all who took time to respond. I am so grateful to have found this site. Now, I just have to pull the trigger. I am so fun shy after having probs with HVAC contractors who is talked water heater not to code but will it fix it (so I have to pay another $1200+) to add expansion tank, etc. Less than removing and starting over but ARGH!! :-)

    happy laundering and thank you again! Such a great site with kind helpful members. Best,

    amy