Software
Houzz Logo Print
grammyp_gw

Long arm help, please.

9 years ago

I have a Nolting Fun Quilter 17. Today while free motion quilting, the thread jumped out of the thread holder over the cone and the top thread broke at the needle. I re threaded and when I started to sew again, the needle bar would not go completely down. I removed the bobbin and case, and the needle, but it still won't move up or down. I cannot see anything obviously holding it in place. Has anyone ever had this problem? I sent a note to the dealer and hope he will be able to help since it's about 8 hours to his shop.


Comments (3)