Software
Houzz Logo Print
rodneymccall

Quote on Heating and Air Conditioning System

9 years ago
last modified: 9 years ago

I am having a Trane XL18i 4TTX8048 4 Ton Air Conditioning System installed with a S9X2 Series Variable Speed 95% Furnace, 2 Stage. The price from Preferred Choice in Greenville, SC includes new comfort control, new condenser pad, approx 75 feet of refrigeration line sets, new flue pipe for furnace. Adding 1 new return (Cost $375). After the $500 rebate from Trane the quote comes to $11,760. No duct work required. Replacing Goodman 3.5 Ton unit and HEIL 125,000 BTU gas furnace.

Comments (11)

  • 9 years ago
    last modified: 9 years ago

    What size new furnace?....what size is your home?...dealer should specify thermostat model, it should be Trane mdl 824...anything about a Perfect Fit Media Cabinet?...nothing special about pricing, I would say on high side....

    IMO

  • 9 years ago

    SDV2B08oU4PSAA Furnace 1st stage is 52,000BTU second stage is 77,600BTU 96%AFUE The home is 2479sq. ft. finished. The old unit was 125,000BTU. One company said the manual J called for 3.1 ton AC. The thermostat model was not specified in the quote but I will ask. They mentioned a media cabinet but I have always used electrostatic filters and I think I am staying with those. When they took the old unit's evaporator out it was spotless after 20years use so I think the electrostatic filters are working pretty good. I am going to buy new ones for the new unit. Any suggestions?

  • 9 years ago

    If you saw the old evaporator coil yourself and it looked in good condition, I would continue what you are doing...I assume you place these filters at all of your returns...correct?...you need good filter protection for indoor air quality and to protect evap coil and var speed blower motor...I just prefer a whole house media filter cabinet which can last up to one year before changeout. I would say you are being sized correctly on the new furnace. For your location, I doubt you would ever need high stage.

    IMO

  • 9 years ago

    Great! Thank you for your input. Yes, the evaporator coil looks good for a unit that was installed in 1997. I hope this one lasts as long. I enclosed a pic. I was concerned about the furnace size and price for everything and I appreciate your input on all of that. If you ever have questions about swimming pools I am happy to help.

  • 9 years ago

    I have the two electrostatic filters on each side of the unit at the unit. They added another return downstairs in my day basement and put a normal grocery store kind of filter in it. After that filter it stills goes through one of the the electrostatic.

  • 9 years ago

    Not clear....where are your filters located?....how many returns do you have?....post back....

  • 9 years ago

    I also suggest you request the AHRI matching number from your quoting dealer...

    IMO

  • 9 years ago

    the two filters are at the base of the air handler unit on each side.

  • 9 years ago

    when you say air handler unit, you are referring to the Heil furnace, one filter before blower motor and evap coil, the other afterwards?...

    TD


  • 9 years ago

    No. If you are facing the unit there is a filter on the left side of the blower and a filter on the right side of the blower. This is an upright unit. Air coming in on both sides of the blower compartment. Then when they added another return they put a normal filter in it. But that still goes into where all of the other returns go in and then that air goes through the electrostatic filter

  • 9 years ago

    I would look at Perfect Fit media cabinet...don't care for existing arrangement...

Sponsored
J.Holderby - Renovations
Average rating: 5 out of 5 stars4 Reviews
Franklin County's Leading General Contractors - 2X Best of Houzz!