IMO those ring pulls will not be right for those wide drawers and I never like 2 pulls or knobs on a drawer I would stick to all onestyle of pull in different sizes in proportion to the cabinet size

You could do a pull 24” long it depends on the pulls you choose. I like the stainless bar pulls fro Lee Valley in tons of sizes . I did not realize this is not a kitchen cabinet so the ring pulls migt be fine.

ok. I have found these pulls/knobs that I really like but need your opinion about mixing metals so close to the kitchen where I have used polished nickel. Thoughts about using burnished brass in this style? The adjacent HVAC door along with side door to this room has brass hinges and knobs. https://www.thehardwarehut.com/search-product-result.php?cat=424&mfr=175&collect=2915. Also, would the 7" pulls (1 per drawer) be long enough? Then, use the 7" pulls on the 57" doors above and four single knobs on the lower doors.

to show how close the cabinet hardware will be.

I like the ring pulls! Do they come in a pushed nickel to match the metal of the kitchen?

I do not think this piece needs to match a kitchen. Will the ring pulls cause the user to rub their knuckles on the painted surface by grabbing them? That would be my biggest concern.

i would not do the bar pulls, they have been done to death and personally i am so sick of them.. there are so many better choices than that.

i agree with Mrs. S re: the ring pulls. nice to look out but i think over time they would be annoying/banging against painted cab causing wearing.

i feel u have to semi-match kitchen, not same exact thing but in the same family .

would you use the 6" pn pulls on the three bottom drawers (centered) and top two tall cabinet doors or make the tall cabinet doors smaller? Also, would you use the round knobs/square knobs on smaller doors or center rings? this is an TV cabinet with extra storage and not a cabinet I will be using daily as for as wear and tear with ring pulls. http://www.waterstreetbrass.com/hudson

It looks like I used the same hardware in my kitchen that you used in yours. If you like it, I'd use the same, and in the same way, for these other cabinets. Here's my kitchen: