Software
Houzz Logo Print
trescool

Pre-rinse vs pull-out faucet?

8 years ago

I still can't decide what kitchen faucet to get. I want a modern one with a hose that can reach inside a deep sink, but the one I currently have (Grohe concetto) has a stiff hose that is difficult to use and scrapes the inside of the spout when I pull it out. I thought a pre-rinse style might be easier to maneuver., especially if it doesnt require pulling out a hose. Or maybe some hoses are easier to pull out than others? Any thoughts about easy to maneuver modern kitchen faucets?

Comments (5)

  • 8 years ago

    My personal opinion: Pre-rinse look industrial and have no place in most kitchens.

    trescool thanked strategery
  • 8 years ago

    I was against the pullout, but my husband talked me into getting one for our current kitchen. It’s a Delta & I’m so glad I did!! I use it daily with ease. The hose is flexible & I love the magnet connection. I’m so glad I caved.

    trescool thanked mark_rachel
  • 8 years ago

    I am not a fan of the pre-rinse look. I would get a pull out instead. I liked my Delta Trinsic very much.

    trescool thanked Rita / Bring Back Sophie 4 Real
  • 8 years ago
    After 6 trips to the plumbing supply store, and a lot of trying out many different pull out and pre rinse faucets I ended up getting the Delta Trinsic too. Here’s my summary: if you have a wide sink, most pre rinse faucets don’t have enough flexibility to reach the corners; I think I’d get gunk between the hose and metal spring; I didn’t like how they hooked back to the center holder for the most part. For the pull outs, I looked at both metal and non-metal hoses. I kept hearing that you should get all metal so they last longer/better quality and I finally came to the conclusion that those are harder to pull out and I cannot handle the noise they make. Once I’d finally come to that conclusion, the Delta Trinsic was a no-brainer.
  • PRO
    8 years ago

    We have tested dozens of both types, and each has advantages and disadvantages.

    The pre-rinse has an industrial look that cannot be disguised. If you like the look you will probably like the faucet. If not, you won't. Residential models and the so-called "semi-pro" types often are too short to have adequate reach. As hemina noted, they may not reach all corners of a big sink. Generally anything under 24" tall is not tall enough. At least 30" is better.

    if you are going to get a pre=rinse, then get a commercial quality faucet from a company that supplies restaurants. But, make sure you are clear that it is for a residential kitchen or you may get more water pressure than you bargained for.

    Pull-out, Pull-down faucets often also have a reach problem, especially those made in Europe or to European design specs. The hoses are often too short to reach the corners of full-size sinks.

    The basic drawback of pull-out/pull-down is that the faucet tends to fail at the hose attachment. This is less a problem than it was 10 years ago, but still around, especially in Chinese-made faucets. Always get stainless steel hoses to minimize the risk.

    My personal preference is a pre-rinse. The Boss, however, won't stand for it. So we compromised. She got what she wanted and I still get to eat at home.

    trescool thanked StarCraft Custom Builders