Software
Houzz Logo Print
webuser_332421179

Kitchen Cabinets

6 years ago

I have been looking at cabinets from various places Eggersmann, Leicht etc and the prices are around 40-70k. I have a friend that used Ikea boxes with more custom fronts. I had thought that this would be poorer quality but as I have went to the high end German cabinet stores the boxes seem to be very similar and apparently they all get them from Blum.


Any thoughts on this? Does it make sense to get custom fronts and Ikea boxes for a high end kitchen or is it still better to go with the custom throughout even if the boxes seem the same.

Comments (6)

  • 6 years ago

    @User I think my issue is that poggenpohl, eggersmann etc seem like the drawers are cheaper than the typical plywood boxes and they say they get it from Blum which is the same as where Ikea gets it. So is the difference in the boxes or the doors or both?

  • PRO
    6 years ago
    last modified: 6 years ago

    The difference is everything, in the entire cabinet. Top to bottom. Every detail is a higher quality detail. The options difference fills an entire 900 page spec book vs a 4 page one. Comparing a plywood drawer to a Metabox is oranges and kumquats. Not even the same thing.

    Yes, Blum makes Ikeas’s hardware to IKEA’s specs. It’s much like the $89 Kohler bath faucet at Home Depot is made to a specific price point rather than a quality point. The all brass Kohler faucet at a plumbing supplier is 3x the cost for both internal quality differences and external styling differences.

    Do people buy the $89 faucet or IKEA cabinet? Absolutely! And they are happy with their purchases. It still doesn’t mean that they are not buying objectively worse quality. It just means that even basic materials can be good quality and outlast many people’s attachment to them as their desired style.

    Plenty of people also buy the more expensive materials, because they can, and they can tell the quality difference, and that’s important to them. Or because the crowd that they hang with can tell the difference in a Rolex and a Rollex.

    There are plenty of options in between the two that give you some of the Euro quality at a lesser price and much shorter lead times. Like Durasupreme. Or Omega Full Access. It’s not an all or none choice here.

  • 6 years ago

    Thanks. Do you happen to know anything about Ornare? I liked there finishes more than Poggenpohl and Eggersmann but can not find much information about them.

  • PRO
    6 years ago

    Check out Shiloh eclipse cabinetry. Frameless. Lots of options. Bit more than ikea but a lot less than high end frameless.

  • PRO
    6 years ago

    The biggest limitation of IKEA are the cabinet sizes. With the pricier options you mentioned, you can design each cabinet to an 1/8" in width, depth and height. With IKEA, you have to work with their limited box sizes and that often means more fillers or awkward cabinet combinations than you would see in a higher-end kitchen.