Software
Houzz Logo Print
fireweed22

Breaking down the power bill for a specific outlet?

6 years ago

An employee will be living in an RV in my yard this summer, and will be plugging it in to my house. Rent plus electricity.

As it has heat and AC, (and I lived in one while building my home), I know that electricity will be more than the tenant expects.

Is there a way to find out the amount of electricity from that specific extension cord? It’s the only outlet on that fuse, built for this purpose.

Some kind of meter? Thanks!


Comments (15)

  • 6 years ago

    In some places it’s illegal to charge a tenant for electricity unless it’s measured by an actual power company meter. The Kill-A-Watt meters seem to be limited to 15 amps @ 120v and while someone probably makes one for 240v (I’m assuming A/C is your concern) I can’t help but wonder if you’d just be better off adding some fixed number to the rent and being done with it. If you lived in the RV, you should have some idea of what electricity costs.

  • 6 years ago

    There are meters you could buy and use. Cost around $200.

  • 6 years ago

    Thank you all. Will search out kill a watt meters and hopefully other options pop up in the search. Much appreciated.


    I did live live in an RV, but it was 10 years ago And prices have likely gone up. I was always surprised how expensive it was (terrible insulation) and I’ve met others living in rv’s who were complaining their landlords were ripping them off with power bills. Pretty sure they used more power than expected. So I’m just trying to head off future arguments.

  • 6 years ago

    The small meters are around $25. Hopefully other options?! Why not search for the correct meter?

  • 6 years ago
    last modified: 6 years ago

    There's a way to do this, but it's not with a Kill-a-Watt or a similar low cost plug-in meter. I own a Kill-a-Watt. I've seen what's inside, and I can tell you that it's not intended (and isn't suited) for weeks or months of continuous use.

    Since the power companies are replacing their old KWH meters with new "smart" meters, there are lots of used standard KWH meters available surplus. You can find them on the big auction site for around $50 (you want a three wire single phase type), and you can get a meter pan for it at the hardware store for $30-40. Add cables with a plug and receptacle, and you have a sturdy, reliable temporary KWH meter.

    But I wouldn't bother. I'd just agree with your tenants on a percentage of the bill for them to pay each month. True, RVs are usually poorly insulated, but look how tiny they are compared to a house. I think that you're probably overestimating their likely energy use. Something around 10% of the bill would be reasonable. Maybe 20% at the absolute most.

  • 6 years ago

    Jim Mat

    " There are meters you could buy and use. Cost around $200. "


    Will you cite such a meter? Link?

  • 6 years ago

    Do you have good records of your usage, without the RV? If so, charge your tenant the difference between your historic usage and the new usage. This would be fair as long as you don't add any power-hungry appliances, causing you usage to increase.

  • 6 years ago

    You'll spend more time buying and hooking up a meter for a few months' use in a not-large unit. And then what if it breaks or doesn't work well or there's some disagreement with how accurate? (Note: kill-a-watt mostly gives a live reading, not historical - sure there are some other ones available, but not really designed for this use either, and cost more money). Just come up with a fair formula or flat amount and forget about it.

  • 6 years ago

    fireweed, if you need more info, please respond.



  • 6 years ago
    last modified: 6 years ago

    The Kill a Watt will do what you want, but it isn't a robust device. It can't withstand full rated load for long periods of time. It will fail. It's for periodic use in figuring out how to cut your energy bill. It's not equivalent to a true kilowatt hour meter.

    If you are feeding the tenant 120 volts, here's a relatively easy KWH meter to install. Just peel the jacket off the cable of a heavy-duty extension cord and feed the individual wires through the holes in the meter's body.

    You can use this one for a 4-wire 240 volt feed.

    But really, I wouldn't mess with it. Just agree on a percentage of the bill. Or bundle a charge for it into the rent and don't worry about it.

  • 6 years ago

    My mistake on the kill-a-watt. Mea culpa.

  • 6 years ago

    RVs usually require 30amps/120v. Big RVs use 50amps/240v.

  • 6 years ago
    last modified: 6 years ago
  • 6 years ago
    last modified: 6 years ago

    I guess it depends where you live, but if I put a utility meter in one of residential rental units I can’t legally use to charge my tenants for that utility. . Only the utilities or the city can do that.