Software
Houzz Logo Print
a1an

Additives/Cleaners

5 years ago

What's in your rotation of -additives- you guys are using.

Running a Sodium Percarb sanitize cycle in my machine . It's -ahmazing- even though you think the drum is clean, how darkishthe water is on this cycle right now

Comments (14)

  • 5 years ago

    Borax or Oxi Clean or liquid chlorine bleach or STPP.

  • 5 years ago

    Sodium Percarb cycle done. Now one sanitize cycle on a citric wash...



    Going to read older threads on Borax. I have zero clue how Borax is used

  • 5 years ago

    Always STPP. Sometimes Biz powder. Almost always chlorine bleach on whites, if not then Biz or oxy. Sometimes liquid softener. Never run a machine-cleaning cycle, no need for it with my habits. :-)

  • 5 years ago

    STPP in every load.

    BIZ liquid and powder are always on hand.

  • 5 years ago

    Where is everyone getting STPP now? I'm running low.

  • 5 years ago

    What is it?

  • 5 years ago
    last modified: 5 years ago

    STPP is Sodium Tripolyphosphate.

    Otherwise known as Phosphates back in the day.

    Powdered detergents usually had Phosphates way back when and helped detergents work better.

    It was removed as it had an adverse affect to the environment.

  • 5 years ago

    @SEA

    Last I bought was via Amazon from seller Quality Producer Direct. Prior to that was Amazon via Pro Supply.

  • 5 years ago

    Off topic, I don't know how much gentler SP is compared to liquid bleach but I will state this.....


    On mom's front loader, sanitize cycle with Citric Acid, 2 Cycles of Sodium Per . That/s roughly about 8 Hrs of washing cycle right there. Each Santize Cycle is around 2 Hrs and Change. If one peeled the Gasket Back, you could still see some buildup after the 3 cycles.


    It's my understanding Liquid Bleach is also not good for the rubber gasket ?

    Anyhow, I did 2 back to back Sanitize Cycles with LB and that got rid of off the buildup. I knew it was working after the 1st sanitize cycle as when you peeled and looked at the outer drum, you could see black -specks- that was loosened up from the 1st LB Sanitize Cycle. Still clinging but definitely areas had been broken up. After the second cycle, it was about 90% clean !

  • 5 years ago
    last modified: 5 years ago

    SP ... you mean STPP?

    There's a food-grade version of STPP used in foods and toothpaste that's more pure than the industrial grade used for cleaning products.

    ETA: I don't think chlorine bleach fits the criteria of food-safe.

  • 5 years ago

    Percarbonate and liquid peroxide are my primary ones. I also make a powder that's bentonite + baking soda + salt primarily for the bentonite's softening power

  • 5 years ago

    I add citric acid in where fabric softener is supposed to go, and Borax and STPP in with the detergent for every cycle.

  • 5 years ago

    Would the citric acid break down fabric?

  • 5 years ago

    No, citric acid causes no damage to clothing.