Software
Houzz Logo Print
lynsey_andrews

Help, what undertone to use?

4 years ago

I know I want to do a light to mid Benjamin Moore gray on the walls, but not sure what undertone I should be going with to make it work with this floor and those tiles. Thoughts?

Comments (11)

  • 4 years ago

    Post a photo up close of the tile with a white sheet of paper in natural light and with no flash. I don't think the tile is gray, but I can try to steer you in the right direction!

  • 4 years ago

    Go as light gray as you can. It will brighten up the room against the dark floor.

    I agree, the tiles look more beige family than grey. Maybe a taupe.

  • 4 years ago

    Can't really tell what color the floors are, but how about Edgecomb Gray? It's a popular BM greige. The bottom line is that you're going to have to sample in order to figure out what will work. Colors don't look the same IRL as they do on computer monitors. Go to BM and bring home chips of colors you like, then either buy sample cans or the peel and stick samples from Samplize.

  • 4 years ago

    I have a feeling once we get in here and clean these are going to be a bit lighter.

  • 4 years ago

    My tastes are neutral, minimal, and skew Scandinavian. Carpets are going and we are putting in Lifeproof LVP - deciding from in stock colors. Not married to the floor color above, Hickory Smoke. Just hoping to make it all work with these entry tiles as well as kitchen tiles.

  • PRO
    4 years ago

    I think I need more info as to why the tile at all for sure> I have C2 Vancounver Day all over my main floor it is a very pale gray almost white . IMO the sample you show is too blue. You need to have really good lighting I assume this is a basement since you have ceiling tiles. I did my walkout with very similar vinyl plank flooring in this color but cut 25% maybe that would work.The lighting needs to be all bulbs changed to LED 4000K before choosing wall color I see no pot lighting so all the lighting will have to come from table and floor lamps unless you plan to add pot lights.


  • 4 years ago

    Sorry that wasn’t a sample, just a white piece of paper requested by a previous comment to get a better idea of tile colors. Thanks for your recommendations. This is a basement apartment in our home. We are moving my our tenant out and sick Mother in. On a bit of a time crunch unfortunately.

  • 4 years ago

    The tiles look a bit pink to me. I suggest a neutral like BM Pale Oak or BM Maritime White.

  • 4 years ago

    Hold the phone - get the new floor in there first. Then pick paint. You are doing it backwards. Also, wall color needs to be coordinated with soft furnishings colors - rugs, sofa, etc more so than just the tile in the entry.

  • 4 years ago

    Your tile looks pinky beige. I would go with Benjamin Moore Muslin or Maritime White (lighter than Muslin). Definitely test first: paint some samples of those on poster board (at least 11x14) and hold them vertically next to the tile colors (the same direction the color will be on the walls) to see if they coordinate. I think that will lighten things up without fighting against the tile colors like gray would.

  • 4 years ago

    Yes but what if Mothers bedding is yellow or lounge chairs are light green or….???….and the floor is being changed out - yes? Can that entry tile be covered in a small entry rug so it’s not visually a part of the equation? Really more info is needed prior to recommending paints.