Software
Houzz Logo Print
joseph_corlett

New Estone Seam Requirements

The new Caesarstone fabrication instructions recommend a seam in countertops at every change of direction. Page 36.


I would have loved to have heard the conversation between the warranty department and the sales/design department at Caesarstone. The only reason they would have made this change is to reduce warranty claims from inside corner failures. The tradeoff is that now the sales/design department has to sell additional seams in tops as a feature. With the veining trend so popular now, this is going to be problematic. Bigly.


This will be particularly damaging to Caesarstone if other major manufacturers don't follow suit. If they do, it's a setback for the industry. DuPont, Corian's manufacturer, decertified everyone 30 years ago. The only way you could get recertified to buy Corian slabs was to attend their school and have a showroom with a full-time salesperson. They lost half their fabricators, but warranty claims plunged 80%, probably saving the brand. This is the approach Caesarstone should have taken; unfortunately they don't pay me for my executive advice.


Should your fabricator ignore the instructions and eliminate the seams, you're out of warranty if an inside corner blows. Or buy Corian where properly fabricated and installed inside corners are under warranty, however, properly fabricated and installed inside Corian corners don't fail.


As most here know, I'm a huge fan of strapping sinks in place instead of using clips drilled into the bottom of the deck. Not only do they leak, use of those clips and other penatrative mechanical fasteners are specifically prohibited. Strapped sinks are warranty compliant, don't leak, and make sink changes much easier. 9.3 page 61.

Comments (6)