Software
Houzz Logo Print
jennifer_sparfel

Missing Tile Problem!

4 years ago

Hi all! we removed walls for our new dining area and our contractor cannot find out floor tile to replace it. Any ideas/tips/advice greatly appreciated on how to make this look intentional.



Comments (8)

  • 4 years ago

    Do you know what tile it is (manufacturer and color)? It doesn't look very old, how old is it? I don't know how hard a contractor is going to look for it, so you may want to look yourself.

  • 4 years ago
    last modified: 4 years ago

    is there tile under the bench? carefully remove those and use them. you should have plenty.

    (this is an obvious solution)

    Or, I'm sure there is one or two under the fridge. pry up those.

    Or, build out the bench a bit further and carefully patch the smaller missing pieces.


    if the tile breaks, then you have problems. You could opt to bring in a type of border tile around the bench area.


    the contractor didn't mention this prior to taking them out?

    or prior to building the bench???


    have you done a search on the tile? contacted the manufacturer or distributor to see if any more exist?

  • 4 years ago

    How do I tell who the manufacturer is? We purchased this house from someone else. And there’s no extra tile.

  • 4 years ago

    We need 4 full tiles, they’re quite large so taking from under the fridge or elsewhere will not work :(

  • 4 years ago

    Sometimes a contractor can remember where he put this same tile in another house and they may have some leftover. Check with a flooring company and they may know who ordered this tile recently and if they might have some leftover. Otherwise I think a darker tile in those two spots may look intentional. Under your frig may be a good place to check to see if enough can be removed for what you need. Good luck.


  • 4 years ago
    last modified: 4 years ago

    is there any way you contact the previous owner? ask the real estate person to see if they can track them down and ask if they remember.

    check up in the attic or garage for any spare tiles. I put my spares there.

    why do you think removing them from under the fridge, or under the bench won't work?

    . you have enough if you go under the stuff that's on top of the tiles. Besides, if all you're doing is patching (which may be the only option) you don't even need a full piece


    If you've exhausted all other avenues, then you could always do some type of decorative border that includes the two patches. this way it looks intentional. it doesn't have to be this wide.





    maybe you could add some wood



  • 4 years ago

    Great ideas, thank you! The only reason I thought under the tile would not work is because I need whole tiles to replace the 4 that were cut into. The wood will work too though…

  • PRO
    4 years ago

    You're not finding matching tiles. Forget that fool's errand please. Take Beth's advice and make contrast your friend.