How many inches high is the area beneath the pass-through? It looks about two tiles high. Bullnose tiles at the pass-through edges would be my advice. Good luck, your stone is gorgeous.

Thank you for the reply. It is 6 inches from counter top to bottom of pass-through granite. I’m more curious with where I should stop on the left side of the pass-through and where it should stop on the right side of the pass-through. Or do those 6 inches go straight across into the tile that will be going under the cupboard.

I would keep all the tile at same level - go straight across. If your cabinets go to the ceiling, so you have those edges all the way up, you might consider going all the way up with the tile there. Whether that would look good depends on how that whole wall looks. Could we get a picture further back?

So,the tile will be from the bottom of the cupboard down to the countertop and it’s supposed to end and align with the upper cabinet for that section. I just need to figure, professionally, how far over to the left do I tile under the pass-through and how do I connect it on the right to what’s going under the cupboard. I just can’t quite picture it. Thanks everyone.