Software
Houzz Logo Print
outernationalist

Natural and Neutral LVP Flooring Sample Comparisons

3 years ago
last modified: 3 years ago

Hi everyone!

We're redoing the flooring in our house with LVP next week. I wanted something that looked like natural maple, oak, or birch, something neutral, not too warm or grey, and with a low texture and low contrast between planks. I scoured this site for photos of samples and installed floors which were SUPER HELPFUL, so I wanted to pay it forward for anyone looking for samples of these types of floors. Thank you to anyone and everyone who has posted their flooring!



1 – Shaw Floorte PRO 5 Endura in White Sand

2 – SUPERCore Xtreme in Honeycomb

3 – Shaw Floorte PRO 5 Endura in Oceanfront

4 – NuCore Performance in Sugarloaf

5 – Duravana Hybrid Resilient Flooring in Magnolia Bridge Oak

6 – NuCore Performance in Butter Toast

7 – Flooret Modin LVP in Soho



We ended up going with the Shaw in White Sand (#1) so I'll post the installed photos as soon as it's done next week.

Comments (19)

  • 3 years ago

    So glad you didn't pick supercore. We installed it 3 years ago and are disappointed in how it has held up. Over time the short ends stick up a bit and the chairs get caught on them.

  • 3 years ago

    Good information and thanks for sharing.

    Glad you didn't choose #6...too pink!

    Why not come back to this post and post after pictures.

  • 3 years ago

    Beautiful! enjoy your new floors!

  • 3 years ago

    Very nice...looks good with the black windows.

  • 3 years ago

    Your description is exactly what I'm looking for. I hope I like this when I see a sample in person. Thank you for this post!

  • 3 years ago

    Oh, but when I asked for this at a flooring store yesterday, he told me it isn’t recommended for living areas due to a thinner wear layer than the Provenza I saw. How’s yours seem so far?

  • 3 years ago

    @Peggy It’s only been a few months but they look as great as the day they were installed.

    I was concerned about the nominally low wear layer as well (compared to other brands) but watched a YouTube video on wear layers and learned the 12 mil layer combined with the ArmorBead finish holds up just fine.

    A simple test is the butter knife test. Scratch a sample with a butter knife hard and see what happens. Some of the samples with a higher wear layer actually scratched way more easily than the one we chose.

  • 3 years ago

    Thank you so much, Nicole! I’m going to try to get a sample.

  • 3 years ago

    Nicole, your floors look great! Thanks for sharing the details and the after pictures! Did you install these yourself or hire it out? How was the stair nose done? Does Shaw sell it or was it custom? I have a couple of areas that would need that and not all brands sell a matching stair nose and I don’t want to custom make them. TIA!

  • 3 years ago

    Thanks @centipede0705 ! We hired out a company for the install. And Shaw has a matching stair nose and threshold for these!

  • 3 years ago

    Are the floors still holding up ~6 months later? Any regrets?

  • 3 years ago

    No regrets. They still look amazing!

  • 2 years ago

    Does the white sand give off a pink tone at all?

  • 2 years ago

    @kndr629 no not at all. I’d say they are solidly neutral, if anything slightly cool-toned. Here they are in natural sunlight next to a red rug, cream rug, and my white socks.

  • 2 years ago

    Thanks so much!!

  • 2 years ago

    How was the click system? Did you or your contractor have issues with them breaking during installation? Any scratches/dents, peeling, or bubbling issues so far?

  • 2 years ago

    @Alana No issues during installation, and no scratches, peeling, or bubbling at all. We’re very happy with these floors.

  • 2 years ago
    last modified: 2 years ago

    @Nicole are there any yellowish tones in the flooring