Software
Houzz Logo Print
gardenwebber

designing a pots/pans drawer

18 years ago

I hope this isn't a stupid question. Perhaps this is "common knowledge" to seasoned kitchen obsessed people...

How many inches does one have to work with when they are deciding on drawer depths? I am finalizing my cabinet needs for our cabinet maker and want to make sure I get it right. I am planning a 30" wide, 24" deep pots and pans drawer. I am planning for pots on the bottom deepest drawer, pans in the middle medium sized drawer and lids in the top shallow drawer. I pulled out all my "stuff" and measured, and it looks like I need 13" for the depth of the bottom, 9" for the middle drawer and 8" for the top lid drawer. How do I translate this so I can tell the cabinet maker what size to make the drawers?

Comments (7)

  • 18 years ago

    Do you have other banks of drawers, or cabinets with a top drawer? You will probably want to make the pots & pans drawers to the same dimensions, so it looks right. I think it would be strange to have one top drawer 7" deep and another one 6" deep, jmho.

  • 18 years ago

    lightly - do you mean that whatever dimensions I use for my pots and pans drawer, that I should use the same for any drawer banks that are next to it? I might have another 30" wide bank right next to this pot/pan drawer I am talking about. I haven't decided if I want it or a pantry cabinet, so its a possibility.

  • 18 years ago

    I don't think this is going to fit at standard counter height if you go with traditional drawers. My counters are 36" high with 3.5" toekick and tile/schluter counters.
    I just measured some of my drawers in a triple stack.
    The face of the top drawer measures 7" but there is only 5" height inside the drawer; the middle drawer measures 11" on the outside and 9.5" usable inside; the bottom drawer measures 12" on the door and 10" usable depth inside.
    All the drawers have blumotion slides that fit under the drawer, so you might get more depth with side-slides.

    If you go with double cabinet doors and put slide-out trays inside, you'll get a little more room. Under my top drawers (same as above), I have double-doors and two adjustable slide-out trays that are set (right now) to give me 7" height and 13" height.

    Or, you might consider getting 30" deep cabinets, as I have. That's about 25% more storage space. But that's another thread...

  • 18 years ago

    Here's my setup. I really like having the slide out shelves vs full drawers. My large skillets are kept in a large, deep drawer that is under my warming drawer and I find it not as easy to use.
    The lower drawer hold a total of 4 large pots.
    {{gwi:1580699}}

    The interior width of the cabinet is 25 1/2" and the depth is 22 3/4".
    The height from the bottom of lower drawer to the bottom of the second drawer is 10 1/4". The front of each drawer is 3 1/4" deep.

    The top drawer, where I keep all my lids, is 7 3/4" from the bottom of the drawer to the frame of the cabinet

  • 18 years ago

    Forgot to add......having a deeper center drawer allow me to stack 2-3 pots.

  • 18 years ago

    annz,
    That is really nice. Our cabinet company calls those "slide-out trays" rather than shelves, because there are sides to them.
    So this looks pretty close to what I have, except I have only two trays inside and with 30" wide I had to go with double doors, and of course, 25.75" inside tray depth (some pots hang over the sides of the tray though).

  • 18 years ago

    I have 2 36" wide drawers (one on top of the other). They are terrific - they hold all my pots and pans as well as stockpots. I was thinking the other day that this might be my favorite organizational feature of my kitchen.