Software
Houzz Logo Print
somonica

Miele hack for all!

18 years ago

For those who need more rinse water but without a LCD screen:

see P69-71

For W4840 owner:

ever wonder what "suds cooling" option do?

see P25-26

Graduated rinsing = suds cooling !?

Here is a link that might be useful: Miele WT945 super manual!

Comments (7)

  • 18 years ago

    This is interesting but I would be careful. This model is sold in the UK and the programming it mentions may not work on other models.

    I have my model, which is not the 945, programmed for suds cooling and higher fills in the wash and rinses, but the instructions to do this are not the ones mentioned in this manual and mine offers more options to program than this manual talks about - so I would be careful. I actually wouldn't try this unless my model looked like the one in the manual and so far I haven't seen one sold in NA that looks just like this. In fact this is as washer/dryer combo.
    Too scary for me.

  • 18 years ago

    4840 owners please comment if you've tried this out on your machine.

  • 18 years ago

    utgrad76,

    I like this explanation of suds cooling, by AEG regarding its washers a bit better:

    "Suds cooling

    The suds are cooled down before being pumped out at the end of the main wash (by adding cold water). This reduces thermal shock to fabrics, helping to prevent creasing.

    Due to the process of cooling down the suds or an extra rinse cycle, the water consumption and wash time is increased."

    Because it adds more water, it does not come from the factory configured to be on with the Miele. The factory sends out the washer to be stingy with energy and utilities. I have tried the Maximum Water Level feature, and it fills water into the glass area; Rinse Process adds more rinse water. But, all these add more time, and use more utilities. Also, because you activate a feature does not mean it will demonstrate itself in every washing selection of the control panel as some are made to only turn on with different program selections; the trick is learning what programs selections activate the features.

  • 18 years ago

    I remember reading information someplace(it might have been from a poster on this forum) that explained why suds are cooled for cottons. If I remember correctly hot water expands cotton which is good because it allows it to be cleaned easier, but spinning cotton while is is expanded helps weaken it. So the water gets cooled down a bit causing the cotton to contract back into shape before being spun.

    In my machine 6K 1986 I always got a cool down for perm press even with suds cooling not programmed and even this doesn't work the same for all temperatures.

    PERM PRESS:

    Temps tap cold to 85F - no cool down.

    Temps between 105F and 120F - cold water runs in about 1 minute before the wash water is drained.

    Temps over 120F - a bit of water is pumped out, then cold water runs in and the wash continues for about 1 more minute before being pumped out.

    SUDS COOLING PROGRAMED:

    Perm press acts just like is always did.

    Cottons:

    Suds cooling only takes place at temps between 140F and 200F. Cold water runs into the machine 3 minutes before the end of the wash. The tub continus to tumble as the water is running in. Water fills to about the middle of the door.
    At this level not much tumbling is going on, instead the clohtes are sloshing around in the water. This continues for about 2 minutes and then the water is pumped out ending the wash.

    Suds cooling will not take place in any other cycle except cottons. For the 48XX machines not sure what cycles suds cooling would be active. Probably whites or whatever cycle gives you a hot hot wash.

  • 18 years ago

    My brother have this WT945 in his Hong Kong apartment for 7 years now.....

    I think suds cooling will be usable in "Normal" cycle, don't know if I can get that in "Custom" cycle as well.....

  • 18 years ago

    somonica,

    As jerrod6 stated, it is temperature based, so when this criterion is met it should engage.

  • 18 years ago

    Another reason for "suds cooling" is to protect your plumbing/drain assembly from extremely hot discharge water. I believe in my Miele 1918 at high wash liquor temps this happens automatically in every cycle, not just in the perm press cycle where it happens, more routinely, at much lower temps, as a fabric care (anti-wrinkling) feature.

    Molly~