Software
Houzz Logo Print
christymck

Modifying Existing Solid Wood Cabinets?

12 years ago

Hi. We are planning a refresh of our 1956 kitchen. One of the things that drives me crazy is that the distance from the upper cabinets to the counter top is a mere 12" and so I can't fit my coffee maker or grinder underneath it and it seems to impair my ability to use the counter as a workspace because of the cabinet jutting out near my head (The cabinet is not that deep, maybe 10 or 12").

I think having the standard 18" between uppers and counter tops would be much, much better. Our cabinets are solid wood and extend to the ceiling with some nice period details so I don't want to pull them out. Maybe this is a silly question, but could a contractor simply cut them off at the bottom and cut out the shelves, add a new bottom and redistribute the shelving in shorter cabinets?

Comments (12)

  • PRO
    12 years ago

    Could a contractor alter them? Yes.

    Can he do so cost-effectively? Probably not.

  • 12 years ago

    Post some photos--maybe someone can come up with something brilliant. Plus some of us like to see '50s kitchens that still have their details!

  • 12 years ago

    Here's a photo - the detailing is in the two bars just above the cabinets - they go around the entire kitchen. There is an identical set of cabinets on the other side of the sink not shown in the picture except that is does not but up against a wall. Whadda'ya think?

  • 12 years ago

    Perhaps one section could be modified so you can have small appliances there, but Trebuchet is correct that the labor would not be cheap to do so.

  • 12 years ago

    Recognize, also, that these might be built-in-place cabinets that cannot be removed without basically destroying them. that was the case in my mother's 1954 kitchen. They nailed the supports right into the wall and finished them in place. Some don't even have backs on them. I just repainted them and put on new hardware since they were sound. I have 14 inches to the counter and it is just enough. Maybe you have to just live with them--you'd have to do major surgery on the doors, too...

  • 12 years ago

    By the way, if the second run of cabinets don't butt up against a wall, can you do what I did? Add the curved (or not) extension on the counter?

  • 12 years ago

    Hmmmm.....maybe I should look at this another way. If I trade out my tall Technivorm Moccamaster coffee maker and burr grinder for shorter versions I wouldn't need to modify the cabinets. These are the only appliances on the counter. Might be cheaper too. I'd just have to get accept having cabinets near my head!

  • 12 years ago

    "By the way, if the second run of cabinets don't butt up against a wall, can you do what I did? Add the curved (or not) extension on the counter?"

    No, there's no space - they go right next to a door to the outside.

  • 12 years ago

    Hmm...expensive low-profile appliances might be the way to go. :)

    As far as working with cabinets in your face, so you're doing some refurbishing. This may be totally unfeasible, but...

    The base cabinet run is probably a single massive unit. It may or may not be removable. Perhaps, if it COULD be detached, it could be pulled forward almost up to the doorway. Counters to the wall and tada! Cabinets not in your face and since they're low, you'll still be able to reach into them. That would be a big job though. If one were to go that route, one might do better to replace the base cabinet altogether, reusing the doors and drawer fronts. Modern drawer boxes would make you happier than you know.

    It is SO cute though. I hope you can figure something out!

  • 12 years ago

    I am most curious about the round thing on the soffit above the sink--whatever is that? It has an Art Deco look, as do the double bands of trim. And I've not seen sink cabinet vent holes quite like those, either. More pics would be great!

  • 12 years ago

    Iroll: That mystifying round thing above the sink is range ventilation circa 1956. You open it up and there's a fan that goes to the great outdoors that gets rid of the greasy evilness wafting from my 1956 electric coil range (across from the sink) when I cook. The cabinet vent holes below the sink? Those are to aerate the garbage I believe? Or maybe let out the heat from the heating vent that someone in 1956 unfortunately placed below the sink and next to where we place our garbage and compost today. :)

    Fori: yeah, if I start considering pulling them out I think I should probably just redo the whole kitchen. We've nixed a whole remodel because of the overall cost of doing what we'd want to do. Instead we are splurging on a high end range (LaCanche, CornuFe, Gagg, oh my! - still investigating).

  • 12 years ago

    Can you manage without the storage of one side of the sink uppers? Maybe some open shelves for daily used items. That would give you a more comfortable work area.

Sponsored
High Point Cabinets
Average rating: 5 out of 5 stars21 Reviews
Columbus' Experienced Custom Cabinet Builder | 4x Best of Houzz Winner