Software
Houzz Logo Print
niff_gw

Adding insulation to existing insulation

19 years ago

We are having the siding on our house replaced this summer, and are considering adding new blown in insulation to our exterior walls. We have an old house, (balloon style framing) so much of the old insulation has settled.

I believe the insulation is dated to the 1970s (when vinyl siding was installed). Our old vinyl and shake cladding will be removed, thus giving us easy access if we wanted to 'top off' the current insulation.

Is having 2 different insulations (with 2 different R values) problematic? We live in Norfolk, VA where moisture and humidity may be an issue.

Comments (4)

  • 19 years ago

    My first recommendation is to remove all the existing insulation. It wouldn't be terribly difficult since the exterior siding will be stripped. That would get rid of any mouse "stuff", if there is any.

    Regardless of if you do remove the old stuff or don't, I'd then blow in cellulose insulation. Make sure the new stuff is "dense packed", which means they will blow it in at a density greater than celulose's natrual settling density.

    Dense packing means no settling.

    No problems mixing old with new.

    Cells work fine in your climate.

    Mongo

  • 6 years ago

    MiniSplit Heat, nice, jumping on a 13 year old post for spam......................

  • 6 years ago

    That seems to be the only thing that MiniSplit Heat does. Just spam spam spam.

    How has Houzz not suspended their account yet?

  • 5 years ago

    Signs Your Home Is Under-Insulated.

    https://www.cooling-heating.net/


    Water Leaks in the Attic

    Just as poor insulation lets the heat out of your home, it also tends to let water in. Water has a much easier time finding its way into a poorly-insulated home than a well-insulated one. If you’re experiencing a leaky attic, your insulation may be part of the problem. Leaks are a sign that you should get your insulation replaced as soon as possible! Water damage can cause many costly problems down the road, including mold issues, so give leaks prompt attention. At A+ Insulation, we can handle all kinds of attic insulation problems.


    Ice Dams on Your Roof

    A sign of poor insulation that you may notice during a Kansas City winter, aside from soaring heating bills, are ice dams. Ice dams occur when heat (rising from your poorly-insulated home) melts the bottom layer of snow off of your roof. The melted water then trickles down towards your gutters and may begin to freeze once it hits the cooler air. The result is large chunks of ice and oversized icicles, called ice damming. It can wreak havoc on your roof and your gutter, not to mention it can turn into a safety hazard for those below.


    Frozen Pipes

    Frozen pipes in your walls are also huge indicators that you have an insulation problem. Proper insulation protects your home from damage caused by Kansas City’s freezing temperatures. Poorly insulated exterior walls can cause frozen pipes, which can burst. This can cause thousands of dollars worth of damage. Investing in crawl space insulation can also make a huge difference to your pipes as well.


Sponsored
Franklin County's Heavy Timber Specialists | Best of Houzz 2020!