Software
Houzz Logo Print
alisande_gw

Question about plugging in an A/C

16 years ago

I'm wondering if I can plug my window air conditioner into a power strip. The A/C is medium sized (if that tells you anything), and the power strip is one of those PowerSentry models with a modest amount of surge protection. The A/C plug reads 125V.

The only other things on the power strip are a small TV and a TV converter box.

Thanks for your help.

Susan

Comments (8)

  • 16 years ago

    Susan,

    Check the rating sticker on the ac. Most of the newer ac's draw far less current than their counterparts of 10 or 15 years ago. Then check the rating of the strip itself. If the small tv, converter and ac add up to say 9 amps and the strip is rated at 15 amps then no problem with the strip itself. This of course is based on the assumption that the wall outlet you are using is not connected with other outlets in the house, in which case you can still potentially blow the circuit breaker in the main panel if you exceed the maximum amperage of the circuit.

  • 16 years ago

    Scottys advice is on the money, but if the A/C's cord will reach the receptacle, it'd be best to plug it in directly and plug the smaller electrical loads (TV, lamp, radio, cell phone charger, Wii, etc.) into the power strip.
    If you're using the power strip as an extension cord, it'd be safest to get one of those 6-foot appliance extension cords for the A/C to plug in to the receptacle. Be sure to route extension cords out of harm's way and never run them under a carpet.

  • 16 years ago

    The AC plug reaches the outlet nicely, but the problem is that both AC and power strip plugs work in a downward orientation. It's impossible to plug in both at the same time.

    The TV isn't used every day, so I've been going back and forth, unplugging one to use the other. But that gets to be a nuisance, even infrequently, and imagine it puts a strain on the outlet.

    Perhaps a heavy-duty appliance extension cord can be plugged in at a different angle.

    Thanks, everyone!

  • 16 years ago

    This or similar should be available in your local home improvement store.

    Here is a link that might be useful: 3 WAY HEAVY DUTY EXTENSION CORD

  • 16 years ago

    Expanding on petey_racer's statement regarding the quality of power strips -- most of them are designed to handle 15A pretty well - spread out across all the outlets. The contacts are cheesy as can be and often pulling the full rated current through one socket gets things a little toastier than is really good.

  • 16 years ago

    You can just get a 3 or 6 way splitter that plugs into the outlet and then you plug the appliances in. On a 3 way the plugs go on each side with a 3d one in front. Shop your neighborhood hardware store for the configuration that you would like. You don't need another cord floating around.

  • 16 years ago

    Why not just buy a new power strip with a straight plug?