Software
Houzz Logo Print
sniffdog

new recessed lights switching off

18 years ago

I have a new home that is almost finished. I just installed the trim kits and bulbs for my recessed lighting. After each install, I turned on the lights and left them on for at least an hour to see if there were any heat realted issues - I found one.

The issue is with two 4" IC cans that are located above my kitchen sink. After about an hour on, the right light turned off - which I presume is the heat sensor kicking in. After it cools - I can turn the light back on. I thought it might just be a defective can or heat sensor, but then the left side can 3 feet away had the same problem.

I currently have a 50Watt Par 20 Halogen mini flood bulb in both. The trim is a Juno 14W-WH trim. I know these are IC cans because I checked when I put them in - but could it still be too much insulation material in the ceiling around them? The house was spec'd for R38 in the ceilings and we have blown cellulose.

I have similar cans installed in other parts of the house with exactly the same trim & bulb combo, and similar insultaion in the ceiling - and these work just fine.

How do I trouble shoot the problem. Should I try a lower wattage bulb first? Has anyone experienced a similar problem with IC cans - coould it possibly be 2 defective heat sensors? Or is too much insulation the likely culpret - if so - how much should be taken off.

Thanks

Comment (1)