I am sorry, what I was trying to ask was “would quartz be slip safe to use as shower pan?”

"would quartz be slip safe to use as shower pan?" Yes. Discuss options for making the shower pan "slip safe" with your fabricator.

Any idea where to purchase these slabs or installers near Pensacola, Florida?

108 Industrial Blvd, Pensacola, FL 32505

How about where to purchase in Atlanta?

Hmmm, any recommendations for experienced porcelain slab fabricators in the Los Angeles area?

I've bought the porcelain slabs for my master bath but need an experienced installer. Any suggestions in Charleston, SC?

@palazar what brand & thickness?

@LARemodel - we are also in Sarasota - did you do this? did you find someone locally?

I found a fabricator in the Atlanta area!

https://www.armexstone.com/

Recommendation on supplier near Lake Charles, LA?

I bought Level Brand 12mm slabs -found

If there is anyone in need of not only the porcelain slab products, but qualified fabricators and installers too, our company provides customers with that as well . We are located in the metro Atlanta area. Check out our profile for our work.

Does anyone know of fabricators and installers in Chicago or Indianapolis?

Hello Ariana, yes Galway Marble & Granite in Broadview, IL.

Does anyone have any recommendations for fabricators and installers in Charleston, SC?

Can any installers out there tell me how thick the porcelain slab should be for a fireplace to avoid the risk of cracking from the heat? Below is the pic of my basement fireplace awaiting a slab. General contractors tell me to go thicker like 1/2", whereas the stone retailer tells me 1/4" would be fine.

Any showrooms, fabricators and installers in Los Angeles area?

Jim G. The substrate becomes part of the tile when bonded correctly. We have installed a few fireplaces with the center of the tile cut out with great success in 1/4” slabs. From this picture you posted the substrate is installed incorrectly. You should not have a seam in the corner, sometimes the install manual for the fireplace will show the correct method for the substrate as well. All the strength in the tile comes from what it is set on. Inside cuts simply require an educated installer to get it right without having further issues.

Looking in Delaware. Just south of Philadelphia

Looking for a fabricator in Boston, MA. Thanks!!

Are these slabs suitable for a countertop? Thanks

Anyone knows of a porcelain slab installer in the DC / VA / MD ? Thank you!

Looking for fabricator and installer in DFW, TX.

Anyone know of fabricator or installer of porcelain slabs or panels in Louisville KY? Thank you.

Looking for a fabricator and installer of porcelain panels in showers in Delray Beach, FL (Palm Beach County or Broward County)?

Does anyone have any recommendations for fabricators and installers in Columbus, OH?

use hashtags on instagram to source tilers

Looking for someone to buy and install in the Detroit suburban area (Oakland County). Please let me know. Thank you!

any manufactures or installers in the Salt Lake City area?

We are looking for a fabricator and installer in the New Town/Richboro PA area (suburbs outside Philadelphia) for both bathroom walls and floor. Any pointers?

It seems that a lot of the porcelain slabs come in two sizes: 6mm and 12mm. Which is better for wall application?

Looking for a fabricator and installer in Chapel Hill, North Carolina.

Any fabricators and installers in Northern New Jersey or North East Pennsylvania?

We're Northern NJ. Certified & qualified. Feel free to contact us

We're Northern NJ. Certified & qualified. Feel free to contact us

Don’t do it. Or be prepared for installation cost greater than materials plus order double (if vein- match kits). They are incredibly hard to fabricate and install. My dreams have literally been broken in this process.

@astase sorry to hear about your experience. It's extremely unfortunate you had an inexperienced Installer to execute professionally. I can assure you a talented & most qualified outfit. To generalize an open statement to the masses is unfair to those who can execute successfully. If you'd like, I can help direct you to the most qualified installers. We can help you link up with with manufacturer

I’d love to hear more from you, because I truly had a dream that is now a nightmare. I ordered from Mirage Italy through a local high-end tile company. It took forever to get them, and I had to pay extra for delivery. They never told me the install cost more than double the materials, or that only TWO installers in New Orleans do these. And then they break during fabrication.

Any recommended fabricators in Portland, OR?

How about in long island ny

Anyone know any experienced fabricators in Suffolk county Long island NY?

I’m looking for an installer in the Beaumont Texas area please

@j k @dolledptati Try HSCOR 40years experience from Manhattan to the Hamptons. Hscorinc(AT)gmail.com

Looking for an excellent installer in the Seattle area. Thoughts?

Hi. We are considering porcelain with edges that are mitered and sanded to dull the edges. Does anyone have experience doing this in their bathroom with thin slabs? Does anyone have a recommendation for an experienced installer in NY Metro/Westchester/Connecticut area?

The panels are mitered and filled with epoxy to create a smooth not sharp transition. The porcelain panel image is printed on the surface, if you sand the edges excessively you will see the color body of the tile depending on the tile this could produce undesirable results.

Corian and other solid surfaces are superior to tile of any size in a shower. No grout, easier installation, repairable, maintainence free, more sanitary.

Everyone is asking for a porcelain slab fabricator close to where they live. What I did was search on Houzz to find local contractors with porcelain slab installations. Then viewing work that they did a few years ago for any cracking particularly around the sink faucets. I did not have good experiences asking the material vendor for contractors for other projects I have done.