Software
Houzz Logo Print
berryberry_gw

Help with Hood over Bluestar

18 years ago

Hi, looking for some advice as we are starting a kitchen remodel. Likely going with a 30" Bluestar range - and trying to find the right hood for it. While I have read good things about vent a hood, my wife likes the contemprary designs of futuro futuro and I am also intrigued (stylwise and pricewise on Kobe Hoods)

http://www.futurofuturo.com/

http://www.koberangehoods.com/

Three questions:

1. Has anyone hear had experience with Futuro Futuro or Kobe hoods? Did some searches but didn't see many mentions.

2. How important is it for the hood to cover the full 24" of the Bluestar? Most hoods I am finding are about 19" or 20" deep unless I get way pricey with a vent A hood - and my wife hates the look

3. Any other reasonably priced alternatives I should consider that would provide more depth if needed?

Thanks

Comments (9)

  • 18 years ago

    Check on the appliance forum - there have been comments about both the Kobe and Futuro Futuro hoods.

    I would strongly recommend that you get a 24" or 27" deep hood. I have a 19" deep hood over my DCS range and while it does a reasonably good job, the outer front of the hood does get greasy. Some people recommend getting a hood that's 6" wider than their cooktop (i.e., 36" hood over a 30" cooktop) but in my experience depth is more important than width.

  • 18 years ago

    weissman. That is so true. After spend 6,000 on a wolf and going with the wolf hood, vented straight outside, we should of went the 27 inch instead of the 24 for capture area. If you open the oven and there is smoke it will not make the hood area. It will travel infront of it up to the ceiling. After all that money almost 10,000 and we missed the capture area.
    Lynn

  • 18 years ago

    We have a 30 inch Broan that we had installed 14 years ago with the fan motor remotedly located in the attic just where the exhaust is dumped to the outside. We're planning to replace it with an improved model, and have noticed that Broan's new product line is worth considering, although we haven't yet decided. You might want to look at their website. The ability to install the fan motor remotely is an advantage in terms of noise level.

  • 18 years ago

    We have a 24" deep hood over our Bluestar, and we regret that we didn't get a 27" deep one. I think a 20" deep hood would be a big mistake if you ever want to use the front burners.

  • 18 years ago

    You might also check out Independent. I don't think they are much cheaper than Vent-a-hood, but they have a wider range of looks and very nice finishing. I agree with the others about depth.

    Here is a link that might be useful: Independent hoods

  • 18 years ago

    Hi Weissman-- We have a 6-burner Garland commercial range, a Blue Star ancestor. After about 25 years, I'm just getting a hood, long needed. We kept hearing to heed the "capture area" and to buy a mighty fan that will keep up with the cooking. (I was advised to start the hood fan 10 minutes before cooking begins.) We are getting a Best 1200 cfm fan with 42" hood for the 36" width range. We have to leave 6" on all sides of the Garland anyhow. The hood should be minimally the width of the range. I talked with people at Best who were patient with many questions. For us big range has meant big cooking and big aromas...aka smells. I will be so happy after dinner to sleep with a pillow that smells of fresh laundry instead of sauteed onions. Think big!

  • 18 years ago

    I have a 36 Viking and a Kobe hood. I have no complaints at all. It's quiet when it needs to be and sucks the smell/smoke/steam out so well our fire alarm has never went off since the remodel. The alarm in our old kitchen used to go off once a week because our GE was sooo weak.

    For the price, quality and styling, Kobe is a great way to go.

    Here is a link that might be useful: my kitchen

  • 18 years ago

    Thanks for the input - well my wife doesn't want a big stainless steel monstrosity (her word's) which makes this tougher. Guess I will keep looking at all options to try to find something bigger, that is reasonably priced and meets the design approval of my wife. One option is to go with a hood designed for an island (they are bigger) but then we get into hanging it from the ceiling (this is a remodel) and not sure I want to do that.

    I need to check more on indepent - looks like their infrahead inlince heat lamp unit comes in a 27 inch depth - and it is "only" 18 inches high. That may be a decent option

    Thanks

  • 18 years ago

    Hi There --

    We put in the FuturoFuturo 36" Wall Mounted Symbol w/Remote Blower and while I *love* the way it looks I *hate* the way it works.

    We used it over a 36" 6 Burner DCS and the hoods 17" depth just doesn't cut it. Unfortunately, I found these forums too late in our planning stages to learn about things like capture area :-)

    HAPPY NEW YEAR!!
    Liz