Software
Houzz Logo Print
mister_craig

General washing and maintenance tips?

10 years ago

Getting our new LG4270 front loader washer tommorow. If I had to guess I would say I'm a rookie when it comes to using the washer and never really put much thought or effort with using it. We tend to just throw most of clothes together, towels seperate, sheets seperate.

However with a new washer coming in I want to maximize it's use and make sure I'm maintaining it well.

Any tips on washing and keeping this machinery up to maintenance and clean? Things to do vs things not to do?


Thanks!

Comments (20)

  • 10 years ago

    Your model should have a self cleaning cycle as well. According to my Samsung, you should run the self clean after every 40 loads. I do it much more frequently than that. Usually once every week or two depending on usage. Wiping the seals and leaving the door open are the best ways to avoid mold and foul smelling bacteria building up in your machine. Some here will suggest that you not use liquid fabric softener as it tends to build up on parts and hoses, but I love the smell and feel too much to give it up. I also try to do a load of whites w/bleach as my last load of the day, figuring that a little dose of clorox will help kill anything that was left behind by previous washes.

  • 10 years ago
    last modified: 10 years ago

    mamapinky is the person to lay out the best practices.

    Unlike others, I use FS only on towels. Don't use additives or chlorine bleach.

    I also do a lot of hot washes.

    Hot washing, premium detergent, and leaving the door and detergent dispenser open when the machine is not in use are basics.

    I'm a sorter so I tend to have black loads, light and dark color loads and white loads. Also, I wash my dish cloths in one load; cleaning cloths in a different one.

    But these are personal choices. Some just want to get it over with. You've got a good machine -- congrats!

  • 10 years ago

    Prior to my Miele, I had the 1st version of the neptune.....

    FWIW, I don't even prescribe to wiping the gasket and 5 yrs later, gasket still mildew free. Than again, I had service on my Miele about a a 17 months ago, sweet talked the tech working the problem and he swapped/replaced the gasket on my Miele just because.


    IMO as long as you are keeping the doors open (both main and soap) to let the system dry out in between non-use, this goes a LOOOONG way for maintainence

  • 10 years ago
    last modified: 10 years ago

    Craig, maintaining a washer and maintaining clothing are two different things. I am a newbie to FL'ers just in the past few months. I listened to the good advice given here by so many brilliant minds and I applied their techniques to my own daily washer maintance.

    Never wash exclusively in cold or cool water.

    Do as many hot washes as your clothing permits.

    Try to do a chlorine bleach load every few weeks even if your not a regular user of the stuff.

    Powder detergents are your washers friend..not saying you can't use liquid, but make powder part of your routine at least occasionally.

    Go easy on the fabric softener, it contributes to gummy build up on washer parts, may not be a problem if your doing frequent hot washes.

    Try to do full loads when possiable, FL'ers don't like under or over loading.

    Dose detergent properly, this takes practice, some people dont want to see any suds at all, I have found this approach doesn't work for me, my clothes don't get clean....detergent contains an ingredient to help keep washer parts clean..in order for that to be beneficial enough detergent needs to be used, I like to see some suds, just not enough that it hides the clothing. I also know I've used the correct amount, regardless of having suds, if my 3'rd rinse is clear.

    Use HE detergent, but remember even HE is not suds free.

    check your pockets and for loose buttons.

    At the end of the day wipe out your rubber door seal, pull the flap open and use a clean dry cloth and wipe the moisture out. Leave the door open and the detergent dispenser. I take my dispenser out every evening and flush it out with hot water in the sink and leave it upside down in the sink overnight. All of this only takes minutes.

    Run a clean cycle...some people do it monthly some after so many loads. I haven't done it yet on my Duet after a few months because I wash in 150++F almost daily.

    Good luck and happy washing.

    AtomicJay, nice to see you here, its been awhile..and happy to hear you still have your Samsung, its trouble free for you??

  • 10 years ago

    Thanks for the tips! So far everything is working great. No water hammering issues I think. Will do the bleach with some white every so often.

    What's the reason to do more hot washes? For disinfection purposes? Sorry for the noobie questions, but what type of laundry would you recommend we wash hot? I think I usually do our white sheets in hot. Also when I use to separate whites I would do hot, but now a days I feel like I never have enough white clothing to do separately.

    What's the reason to use powder over liquid detergent? clean better? less mildew build up? less suds? Just taking some guesses...


  • 10 years ago

    Hey mama - nice to be back! Work has been busy so haven't had as much time to play on the forms as I'd like. The Samsung is still working like a charm! Knock on wood, it will stay that way.

    I don't want to hijack Craig's thread, but I'm wondering if you could point me to any posts or give me some quick tips about doing laundry in water with high iron content. I have well water with a water softener, but the iron and other metal content isn't removed. I'm concerned about whites becoming discolored over time. Any advice?

  • 10 years ago

    Mister Craig - depending on your water type, soil type and personal preference - liquid detergents really started coming on the market when we got more into knits and washers started changing to become more energy efficient. In my area, powdered detergents are just a fraction of the offerings. Pods seem to be the current formula people are purchasing. Liquids have been around for umpteen years - Woolite was one of the first but by the 70's, you had Era, Fresh Start, etc. Powders don't seem to break down and rinse out in cold water very well. Liquids can be used in all washes. Hot water washes at least once a week will probably keep overuse of gunk cleaned out. Some people follow manufacturers suggestions as to dosing; others never bother reading a label. If your washer has a clean-washer cycle, use it. The owners manual should give instructions on when to run it, how to run it and what to use. My Whirlpool has a special cycle and when the washer decides it needs a cleaning, there's a light that comes on. The manual tells me the washer will only do this for about 3 loads before it goes on strike and refuses to do any more loads.

    My basic recommendations for new users would be to dry the inside of the door, the gasket and under the gasket, then stuff the rag or paper towel into the fabric softener dispenser to absorb the puddle. Once a week or month, pull out the detergent dispenser and run it under the hot water faucet then set it out to dry. If you use fabric softener very often, you'll notice some discoloration and even a bit of waxy stuff lodged in the drawer. The discoloration isn't major but the waxy build-up never goes away on it's own. Most washers are cold-rinse only and it's that cold water running through the dispenser. Leave the door and dispenser open, either the rest of the day, the week or always depending on whether you're in a dry climate or a humid climate. READ THE MANUAL. There is no substitution for it!

    Before adding all kinds of boutique additives and extra options to your basic cycles, try a load on all the default settings first. None of the washers I've ever had in 40 years cleaned as well as the one I have now, even my old WP FL Tier I.

  • 10 years ago
    last modified: 10 years ago

    Honestly, for the cleanest FL possible use minimal detergent, no FS, and use 1/4 cup of bleach with towels or rags twice a month, and always use hot water in high bacteria loads. I.E. Sheets, Towels, and socks & underwear.

  • 10 years ago
    last modified: 10 years ago

    One reason to do more hot washes is to get cleaner clothes and better stain removal with less product. Less product, better rinsing and less residue left in clothing.

    Hot water helps remove body oils and odors.

    Laundry I routinely wash in hot (125-140F) includes bed sheets, underwear, cleaning cloths, and dishtowels. I wash towels in warm because my towels are not white and because they are new and the cotton quality does not stand up well to hot washes.

    I have a sanitary (158F) cycle which I use for heavy stain removal or for sanitizing if needed. A friend's little boy had an accident in the middle of the night when they stayed over. Those sheets were washed on sanitize.

    The liquid/powder conversation is really a matter of preference. Tabs and paks really cut across that. There is no "best" here. Just what you like.

    I don't like powder detergents because I am super senstive. I don't like Tide either as it smells bad in my water. Cannot stand most of the fragrances everyone loves so I stick with certain brands I do like.

    The Persil perls are much better since the grains are thicker -- I don't mind the fragrance and I don't breathe them in. That's my go-to strength detergent which is terrific for whitening, for cottons, and has enzymes for stain removal.

    For towels, which don't need enzymes and require something gentle, I've been using Vaska lavender tabs, which can be easily broken for dosing. And the other day I picked up some grab green Delicate tabs at the health food store. Those are fragrance free, very low sudsing and so easy because they are wrapped. When the Vaska runs out I may stay with those. If I want fragrance on the towels I use linen spray after they come out of the dryer.

    I have a lot of Henkels and Persil liquids for delicate, sports and color washes. I find they don't rinse out easily, especially from knits. The liquids also get quite sudsy, even in cold water. My water is soft so I need only about 1 Tb of these. But they smell very good and do a nice job on clothes that require cold or warm-water washes as they are more delicate.

    It's good to have a least one liquid on hand for cold washes. That choice depends on what is washed in cold. For me, that's mostly clothes made from techno fabrics, synthetic blends and spandex.

    I find sorting makes laundry easier and more reliable. F.ex. I don't mix sheets or towels with anything else -- result: no pulls or pilling.

    People around here are fond of having extensive detergent stashes. I'm with Alex -- I'm streamlining and reducing choices and targeting what works best for each purpose/load. That way, while I may do a few more loads than others do (from the pix I've seen here) I get great results.

    Re maintenance. Good laundry practices -- i.e. enough hot washes and controlled dosing -- pretty much help machines maintain themselves. My machine uses sanitize as a maintenance cycle and i run that about every other week. It's always interesting to see how much soap residue it removes. Anyone who uses fabric softener -- I use it only on towels -- might want to run maintenance cycles once a week to be sure any residue is removed.

    I don't dry out the gasket though I do clean it with a microfiber towels every so often. I dry the door glass sometimes. But I always leave the door open and the detergent drawer pulled out at the end of my laundry day. None of my machines ever had a residue problem with this routine.

    Hope this helps. Good luck with your new machine!

  • 10 years ago

    @Atomic Jay - Water with high iron content can be offset by using vinegar. I'd use 1/2 cup per load and see how it goes.

  • 10 years ago

    Thanks, Roco!!!! I would have never thought to try that. I will give it a go. Thanks so much.

  • 10 years ago

    Mister Craig: For my slightly-lower-end LG 3570 I have been using Perm Press cycle for most clothes, Cotton/Normal for towels and durable clothing (like jeans), Bulky for bedding and sleeping bags, and Delicate for delicate and flimsy clothing. Cotton/Normal seems to be too hard on a lot of our clothing. I have not used the steam feature yet, because I haven't felt a need to use it so far. Also, I don't know if any of the steam-compatible cycles are gentle enough for much of our clothing. (Perhaps someone can weigh in on this.)

    I usually turn the Turbo Wash feature off. For a typical load I will set soil level to one above Normal (adding 6 minutes to wash time), and add one extra rinse. If I have a load which requires more oomph, I use the Prewash option and leave soil level at Normal.

    Like others I wipe down the gasket between washes. I also try to ensure that I remove clothing as soon as possible after a load is finished. This lessens the likelihood that a musty smell will develop in the clothing. (There is a feature that causes the drum to turn over once in a while to prevent this after a load is finished, but I have yet to use it.) I almost always use a water temperature that is Warm (approx. 90 F on my machine) or hotter. I also ensure that, whatever cycle I choose, the dryer temperature is set at most to Medium. Higher temperatures can possibly damage clothing, especially those with printed designs on them.

    I do use fabric softener, but dilute it a bit. I prefer to use powder detergent - I currently use Miele powders, but will soon be trying the recently-released Persil Power Perls. (The old, made-in-Germany Persil Mega Perls were my go-to detergents for several years, until they became unavailable in my area.) We did somehow acquire some large jugs of Arm & Hammer and Gain liquid detergents, which my wife insists we use up. I tend to alternate between the liquid and powder detergents. Personally, I find that the powder detergents clean better than the liquids. I stay away from using pods.

    One good thing about this forum is that several of us have recently purchased LG front load washers. This will be as good a site to find support regarding your LG washer as any other.

    Enjoy your new washer.

  • 10 years ago

    Re the suggestions to use less detergent: Hot water does clean better, and perhaps allow using less detergent (though that isn't what I do). But I don't think heat makes the detergent condition the water more effectively. So if your water isn't soft, and you use little detergent, then you may end up with hard water deposits inside the machine where you can't see. This isn't supposed to be good for machine longevity. So that brings up another maintenance idea: Buy 5 lbs. of citric acid e.g. from Amazon, and occasionally descale your washer by running a long, hot cycle with 1/2 cup of citric acid. I know this is safe for Miele, since their own washer cleaning product is citric acid.

  • 10 years ago

    Suburbanmd...so true....hot water does in fact help with cleaning but it can't be done on its own it needs detergent. .detergent won't do a good job unless enough is used to condition the water. It doesn't matter if you have soft water you still need to use enough surfactants to condition in their way. Sure it will probably take less detergent if you have soft water and it is a trial and error at first. As far as keeping the machine clean, that takes a certain amount of several things also hot water and detergent. ..soft water can really help to prevent hard water deposits but it won't prevent soils and oils from building up but hot water and enough detergent will. I've read where some people use less detergent to prevent detergent build up but if enough isn't used you will instead have soil and oils build up...its for sure a balancing act. LOL.

  • 10 years ago
    last modified: 10 years ago

    suburbmd, or any others - just short of doing a teardown, has anyone ~noticed~ any benefits on running citric acid. I suppose it does help the heater, irrelevant of being able to see it or not.

    Kinda how I drain the boiler tank every 4 months, just to help the anode..

    I do run a cyle of it every 6 months just because....

    As far as seeing/noticing a difference. Nothing. But then again, to a certain level, I suppose this is all about preventative maint...

  • 10 years ago

    I've used not-so-great powdered detergents, which were the only choices in powdered free and clear detergent for HE until Tide Free & Gentle became HE compatible. Those not-so-great detergents, when used without STPP, would leave the drum and door glass cloudy. Citric acid cleaned it right up.


    Other than that, no. But I know how the bottom of my tea kettle looks if it hasn't been descaled for a while, and I know the sound it makes. My water isn't very hard, and it's "artificially hard" in that the hardness is from a calcite neutralizer.


    You've seen the teardown pictures on automaticwasher I'm sure. And when I think about the two Miele W4840 drum failures that came up recently, spider failures perhaps, I wonder if they were caused by the prevalent advice that less detergent is better.

  • 10 years ago

    Have not seen the teardown pics on aw but I have seen teardown pics of dirty outer drums via google. Speaking of AW, I find the forum hard to navigate.


    I don't correlate what you meant re: less det. is better re: drum failures. Bearings are just run of the luck I suppose. Whether it be earlier versus later...can't predict these things - I'm correlating this to bearing failures in other mechanical things and my experience. Well, just short of the spider arm ripping apart, but then again, I've yet to see one and not sure how much material plays a role....



  • 10 years ago

    automaticwasher forums have a nice feature -- if you're signed in, you can choose to see only the thread postings that you haven't read yet. And you get additional features with an upgraded membership that costs something like $12/year. Admittedly the user interface looks kind of old. It's custom-written software, not a standard message board system.


    I mean that if people follow the advice of using very little detergent, then they're encouraging buildup between the drums. Buildup that holds moisture against the spider will encourage corrosion.


    One guy on automaticwasher, a tech with 40 years experience, has said that hard water scale on bearing seals can cause the seals to leak, at which point bearing failure is inevitable. So according to him, bearing failure isn't just luck of the draw. I've done some appliance business with this guy IRL, so his advice carries weight with me.

  • 10 years ago

    We go with the dailiy wipe of seals. I use chlorine bleach on my white handkerchiefs and underwear. Things wear out faster but not that fast. I try to remember that the amount of water FLs use it about a gallon or so, not the 20-40 gallons of a top loader. Measuring cups in detergents were made for top loaders. I use about half of the lowest line unless there are a lot of clothes in a load. When I really stuff the washer (80-90 % full I use the Heavy Duty cycle with extra wash and rinse cycles. Normally always use extra wash and rinse. We have an 8 year old Samsung. In sanitize, it has silver bars that get scraped into the water to sanitize it. I try to not use that much because when the're gone it is costly to replace them.