*1) RedWire-WhiteWire-GreenWire......going into 1st junction box and not connected to anything

*2) RedWire-WhitWire-GreenWire.......unconnected ends going out hole in bottom of 1st junction box to TB2001 Actuator which operates shutters (120 volt tested, square post turns continuously)

*3) YellowWire - OrangeWire.......unconnected ends going out hole on side of 1st junction box into 2nd junction box

*4) OrangeWire goes through Hawkeye 708 current switch, then out a side hole on the 2nd junction box into a RUB1C Relay

*5) YellowWire goes through 2nd junction box, out a side hole into the aforementioned RUB1C Relay

*6) The RUB1C Relay has 4 wires (BlueWire, White/BlackWire, WhiteYellowWire, WhiteBlueWire) comming out of it, then going into the 2nd junction box through a side hole

*7) The Hawkeye 708 current switch has short lengths of GreenWire and a RedWire connected to its posts by the adjuster screw, but are not connected on the other end. These two wires are sheathed with a black and a white wire which are non connected on both ends.

What connections need to be made in order to operate a fan that opens the shutters when running? Thanks for any help :)