Software
Houzz Logo Print
melissa_entzi

Mixing oil rubbed bronze and black?

8 years ago
last modified: 8 years ago

We are gutting our entire house, this is our second house that we will be completely remodeling. We did white doors and trim in our last house, which I loved. However, we used brushed nickel handles/knobs and hinges that I just wasn't in love with. I want to use oil rubbed bronze for the door knobs and hinges this time, I even want to use orb for the knobs on our white shaker style kitchen cabinets. I love the contrast of the dark on white. Anyway, my thought went as far as orb faucets throughout the house a well. Here is my dilemma: I love black light fixtures. Everyone I see I am noticing is almost always black. Is it ok to mix the two, black and orb? Should I consider making everything black instead of orb? Or should I just do orb light fixtures? Just an FYI: There will be small amounts of brushed nickel throughout the house. It is a ranch with a basement, and the basement is our boys' space which I thought about using brushed nickel in for all the hardware. In the kitchen, we will have dark colored (either dark gray or very dark blue) floor to ceiling pantry which I plan on using brushed nickel knobs on. I've even slightly considered making our kitchen faucet brushed nickel. I love the farmhouse look if this helps at all. We will have dark wood floors, white cabinets, white farmhouse sink, wood and metal accents throughout the house.

Comments (21)

  • PRO
    8 years ago

    I wanted to add that I'm considering black curtain rods too with white curtain as window treatments

  • PRO
    8 years ago

    Anyone?

  • 8 years ago
    Maybe think about going with all black instead of orb....less decision making and more coordinated.
  • 8 years ago
    last modified: 8 years ago

    I think it's fine to mix. they mix metals all the time. ORB and black are so close, you will prob be the only one to notice. Consider doing a brushed gold in your kitchen. it's beautiful w/your colors and plays well w/the matte black.

  • 7 years ago

    I’m just seeing your post, what did you decide?!? I’m going through the same predicament. I feel like no one will notice if I have a few ORB fixtures mixed in with the black hardware found in my kitchen.

  • 6 years ago
    last modified: 6 years ago

    sorry to hijack an old thread...

    i want to do bronze windows and black hardware inside the house and my designer didn't want me to..it would be harder to match all the different bronzes i thought...the windows are bronze exterior unfinished pine interiors and we're hoping to be able to color match and paint interior.


    should i get bronze cranks or black cranks? any thoughts?

  • 6 years ago

    I have basically the same window except black exterior.. I painted the interior black so I chose black hardware. what color are you painting the pine?

  • 6 years ago

    @Beth H. : I'm hoping to color match the bronze.

  • 6 years ago

    wait,,,on the interior you want o match what bronze? you have unfinished pine. so you want to paint the pine a bronze color? like SW Urbane Bronze?



    first figure out the paint color. then choose what you think will match best. the ORB should work if you paint the windows this color^

  • 6 years ago

    I'm sorry I am not clear. I am ordering windows Bronze Exterior and unfinished pine interior because it's $3k cheaper.


    I was planning to just stain them a dark stain and buy black window hardware [doors etc. will be black inside the home].


    But then I thought maybe I could paint them white or bronze...and was trying to decide the hardware I would put on the windows [the cranks for casement windows]. Sorry to be confusing.

    If I painted white, I'd get white or bronze I'd get bronze....


    I think I have to order now before I know what will color match.


    Thanks so much.

  • 6 years ago

    you ordered pine. pine doesn't take a stain, a dark stain, very well. you'd be better off painting them. I've done a few of them too. I did one in black and a few of the others I stained, but they were Fir.

    Paint them. easier too. If you want them to look like dark color, paint them the Urbane bronze, or a nice black.

  • 6 years ago

    thanks @Beth H. :I haven't ordered yet.

    My husband is leary of painting vs. staining because of upkeep ?


    Trish

  • 6 years ago

    if you stain, you'll have to apply a clear coat protectant anyway, so I can't see how it would be more upkeep. Use a good wood trim enamel paint (I like Advance) and it should be fine.

    but if you want to stain, make sure to use a pre-stain conditioner on the wood first. apply stain, (try a dark walnut or espresso color) and see how you like it. You could always paint over it if you don't like it

  • 6 years ago

    thanks @Beth H. :

  • 5 years ago

    I have linear light in dining room with an open kitchen & Great Room. Have chosen 2-tier candle chadelier in great room and want to use 2 rub oiled bronze large pendants over 9 foot center island - is it ok to mix these 3 rooms together 2 black lights and 2 rub oil bronze over island? Thank you for your help . . .

  • 4 years ago

    I think it will be fine to mix the bronze and black fixtures. I have an semi-open kitchen and dining room with a nook in the kitchen. The dining room chandelier is bronze and the kitchen pendant over the nook table is black. My kitchen cabinet hardware is bronze. No one can tell the difference between the black and bronze.

  • 4 years ago

    I had the same predicament with my chandelier being ORB and my others were black. It was a noticeable difference so I spray painted my chandelier black and it was perfect!


  • 2 years ago

    I have a beautiful orb fixture over my garden tub, but the only fixtures that I really like for both vanities are black. What shall I do?

  • 2 years ago

    I am redoing my bathroom. The faucet and cabinet handles are oil rubbed bronze. I absolutely fell in love with this lighting fixture which is black with a stripe of brushed gold. Opinions please if this metal combination will work

  • 2 years ago

    I purchased the matte black fixtures. I’m thinking of very lightly brushing some oil bronze paint on them in spots.