Any sofa/sectional manufacturing experts?

6 years ago

I’ve read many comments from some very informed posters in this group, so I was wondering if anyone could decode what this manufacturing jargon means? I am down to Haverty’s or Arhaus for our new sectional, and here is how they describe their quality:

Haverty’s:
The Comfort Flex seating unit consists of a solid steel inner frame with 8.5 gauge seat springs which are cross tied for added comfort and support. By attaching the springs directly to the 1/4 inch steel frame instead of the wooden front and back rails, all seat springs are consistent in tension and support. This solid steel inner frame is then attached inside our 1/4 inch hardwood frame which runs the complete length of the front and back rails providing additional frame support, stability and strength. The Comfort Flex solid steel inner frame also prevents "racking" and joint separation.

Arhaus:
Craftsman built frames are constructed using solid, reinforced, laminate hardwood for lasting strength and superior stability. Frames feature a recycled steel Flexolator suspension system beneath seat cushions for evenly dispersed, firm yet flexible support.

I thought I had read up well on what to look for, but I can’t make sense of any of this!! Thank you!!

Featured Answer

PRO

The KEEPING ROOM

6 years ago

last modified: 6 years ago

Fancy language for plywood frames and drop-in spring grids. It's a mediocre build on both. Flexolater suspensions are OK for backs, I prefer an 8-Way hand-tied suspension for seats, however.

Sort by:Oldest

Comments (6)

PRO
BeverlyFLADeziner
6 years ago
https://blog.thestatedhome.com/sinuous-springs-eight-way-hand-tied/
Lidia
6 years ago
Also watch the Arhaus construction video...it more information and description on materials and assembly.
Related Professionals
West Palm Beach Interior Designers & Decorators · Ashland Interior Designers & Decorators · Lewiston Interior Designers & Decorators · Palm Desert Interior Designers & Decorators · Parkersburg Architects & Building Designers · Lansing Architects & Building Designers · Sebring Kitchen & Bathroom Designers · Owensboro Furniture & Accessories · Willmar Furniture & Accessories · Richmond Carpenters · Marietta Carpenters · Cape Coral Cabinets & Cabinetry · Myrtle Beach Cabinets & Cabinetry · Evanston Cabinets & Cabinetry · Sanford Cabinets & Cabinetry
K G
Original Author
6 years ago
Thank you all so very much! So happy I didn’t drop $7K on something mediocre!
PRO
Patricia Colwell Consulting
6 years ago
I never buy a spring filled mattress or sofa. I love the Italian way of doing support for seating it never wears out . Springs no matter how many ties they have start wearing out the first time you sit it is the nature of a spring.
PRO
JAN MOYER
6 years ago
last modified: 6 years ago
WRONG!! Sorry, Patricia. A quality made eight way hand tied sofa can last nearly forever! I have been sitting on one for over 20 years! Arhaus is not quality. They will guarantee a "frame". You will replace cushioning until your face falls off. It's hopeless I guarantee.

Hickory Chair, Hancock and Moore, Taylor King, Century..........all will get you eight way hand tie AND a spring down seat cushion. Spring down is the standard cushion on Hickory Chair. Yes, you can feel the difference! You can feel the support beneath you.

None can be bought online. Find a retailer or designer. Expect to pay for the comfort, the longevity a host of available fabrics, and even the ability to customize sizing and configuration. There is no "inexpensive" escape route. Wish I could say otherwise.

CR Laine. Lee......there are others. Above the best, unless you can swing a Baker which may set you back half a decent automobile.