Software
Houzz Logo Print
harleyfxr

Confusion about line voltage

6 years ago

Hello, I have a rooftop makeup air unit that is served by a 20A DPST, 10ga wire ( black/white/ground).

When I test the voltage at the unit I get 122v from B to G, 122V B to W, nothing from W to G.

Why would a 120v circuit be served by a DPST?

Is it possible this is a 240V circuit with a dead leg and B & W were used instead of B & R?

Or a 120V circuit but only one leg of the DPST was utilized?

Unfortunately the motor that was originally installed is not available and I have not had the opportunity to take a look in the panel.


Thank you for any help you may have to offer.


Steve

Comments (6)