Software
Houzz Logo Print
joanneh311

Starting up a gas FP insert

5 years ago

We bought a house this summer that has an older Heatilator propane FP insert. The seller’s agent said it worked. Our home inspector was an idiot, and missed a lot of stuff, I don’t even think he looked at it. Anyway, we’d like to use it, so I took a look to see if we could start it. When I opened the panel, the gas valve was ON, and the pilot knob was ON. There was no pilot flame. I’m guessing there is a thermocouple that prevents the main valve from opening if there is no pilot?

I turned both valves off. There is a switch on the wall next to the FP and also a rotary dimmer switch that clicks off at full counter-clockwise. Both are off. The valves outside at the gas tank and by the house are on.

I turned the gas valve at the FP on, turned the other knob to pilot, held it in and pressed the starter button a number of times. Nothing. I waited a while and tried it again, nothing. I tried it again with the wall switch in the on position, NG.

I have a call in to a couple of places that service these things, one already told me they won’t work on anything over 10 years old. Everyone is very busy, not sure how soon I can get anyone out here, if at all.

Any suggestions? I’m keenly aware that I don’t want to blow myself up or burn the house down, but if there are things I can do that are safe, I can try them. TIA



Comments (4)

Sponsored
Mary Shipley Interiors
Average rating: 4.8 out of 5 stars34 Reviews
Columbus OH Premier Interior Designer 10x Best of Houzz