It is bending because iit was leaning toward source of light. Rotating every day isn't the best - rotate every week-10 days. But bottom half or so seems to be stretched - there is space between the leaves. So it was not getting enough light. If my plant, I would behead it: cut the main rosette off, leaving the main stem + the pups in the pot. I would cut it most likely just above 2nd sets of leaves. I woulld remove 2 bottom leaves from the top rosette (those can be propagated); to have some of the stem to stick into the mix. Let the top to callus (abt. 2hrs or so) and pot it up. I would not water it for abt. a week-10 days (depending how warm it is). After that, start watering. Top should root. Bottom part of the stem will most likely start growng offsets along it. 2 pups will continue to grow. To make sure it doesn't happen again, your plant needs more light. Best would be from above, and minimum abt. 6hrs (longer is better). If natural sunlight is not available, consider the grow light. Plant need to be very compact, as the photo shows (from the net):

Try not to rub off the powdery coating on the leaves.