Is this a brand?

Thank you!

I don't care for the direct wire LED lights because of their bulk, but I also don't like the tape strips. The wiring seems messy and difficult to configure. (If you have existing cabinets with a light rail moulding, you do have more room to work with.)

I bought slim line LED linkable type of fixtures as per the cabinet size. My husband carefully drilled small round holes to thread the linking wire through. At the end of each run, he drilled for the plug in end to go up into the cabinet to an outlet.

(The outlet could also be on the wall, but best if it's a plug moulding or just placed as high as possible.)

(I am a little OCD with these types of details, and thought about all this before construction.)

Ours are similar to these:

Enbrighten Premium Linkable Under Cabinet Fixture, 24in, LED, Linkable, 803 Lumens, 3000K Bright White, 38848-T1 - - Amazon.com

Post a photo of a section of the cabinet underneath which you'll attach the light. Is there a molding attached to the bottom of the cabinet that would hide a light installed there? How thick is the molding? Where is the direct-wire electrical box or cable to which you would connect the lights?