Some on the newer front loaders do not have a spin only cycle, but there is a rinse & spin cycle that takes about 20 minutes.

Pauline Ireland,

Some instances it can be done by selecting Rinse & Spin, then unselecting the Extra Rinse function before Starting.

Citing the model number of your machine is helpful in finding specific information related to it.

I always like to rinse when I want a spin so not an issue. The best place to ask is LG service dept.

Get out the instruction manual. Sometimes the less fequently used cycles are activated by a mysterious set of button pushes.

^Yes, check the manual or search online with …”spin only cycle lg (include model #).”

If its a ”smart” model, there are several wash cycles that can be run from the ThinQ app. For example, the spin-only and dryer rack cycles can be run that way for the WashTower models.

Often, there is, but it depends on the model.

It would help if you mantioned your model number.

On most front loaders with a control panel with buttons (e.g. WM4000), press and hold the spin setting button for 3 seconds for a spin-only cycle.

On the WashTowers with touch controls there are two ways:

1) Turn washer on, do not select a cycle, press the Spin button to set the spin speed. Press start.

2) use the Thinq apo to send a Spinonly cload cycle to the washer. Press start.

Google your model # and the manual : ) for usage options