What are your doors constructed of?

The handles may look pretty rinky dink on that size door.

As long as the door is wood and the handles are secured it will be fine. Some MDFs would hold i.e. the bolt won't pull through.

Yes as long a they are attached properly but I guess my question is do they work wit ht erest of thr decor to me they are very Art Deco. I see a tiny shoer and ahuge linen closet so maybe show the whole space in a pic here in a comment/

Get get a true "handle" on the size from your picture but if they are large enough for you to grab to open a full size door they should be fine as long as attached properly.

@Kendrah the doors are hollow doors. Rinky dink means too small? We wanted a smaller less obstructive look that's why I thought of pull handles rather than dummy door handles. But it is a bit risky.

@arcy_gw they are hollow doors not MDF. Im worry if the screws would be strong enough but I guess they wont be too different from the dummy door handle screws?

@Patricia Colwell Consulting the whole space is empty right now, but we will have a vanity with corrugated finish, and a round mirror. The shower is 60inch so not too small. I think the angle of the photo makes the closet look bigger than it is.

@millworkman on I should've put tape on the door to indicate the size, but they are 4 inch long/diameter. The holes are 2.5 center to center if that makes any difference.

"they are 4 inch long/diameter."

I think they'll appear rather small. I used 8" cabinet pulls on my closet doors and they look right. You might use something like these. I chose pulls (brushed stainless steel) that have a similar shape and finish as the door levers.

Sure they should work. Two 4mm screws for each handle should be good. The screws go through the whole door, like most dummy knobs do. Depending on the thickness of your doors, you might need to get longer screws- specs say they come with 25mm long ones. If you feel like you need a little extra insurance, you can use a washer on the head side of the screw to give it a broader base.

I think they'll work fine. Will you be changing the door hinges to match?

@beesneeds washers is a great idea! Thank you for the suggestion I think I will do that

@bearbev no actually I will be getting the black versions of this to match the handles in the rest fo the space.