I had a conversation with my Houzz account rep last week and mentioned to her that it would be a lot more convenient if the posts were listed with the most recent ones first. She promised to look into it, so stay tuned!

Hi Fred Boucher,

Back in August of 2006 we had four "Marvin Clad Sliding Patio Door Custom Size (C SPD) with exterior clad bahama brown aluminum on both sash and frame and interior clear pine with factory applied prime coat" installed. The glazing was insulating glass with Low-E II and argon, tempered. The doors and installation was from a Marvin Window & Door Planning Center in Baltimore. The price was $4,619 per door (about $18,500). The size is 90" x 79 1/2".

Most blog apps allow for users to respond to specific postings and have conversations go from there, instead of every post simply being added at the bottom (or top).

Thanks clubsudz3. Not much difference. The price is the price, I guess. Thanks for the information.

@startnow303 I find that when I access the most recent post on my cell phone it brings me to the very first post on this thread, whereas on my computer it takes me straight to the new post. (I don't have the Houzz app; I wonder if that makes a difference?) The fact that posts appear as they are posted, i.e., in chronological order, is one of the limitations of using Houzz for this type of forum. Nonetheless, lots of great information here if you have the patience to scroll through it.

@rob_architect_aia regarding lighting, well you already have track, which is an improvement. replace the track that's higher up on the ceiling with some pendants that you install connectors to. we found some danish lamps that worked wonders. now to rip out the kitchen from the previous owner's 2006 redesign …

Hello! I just posted "Here's how I converted the six fluorescent light fixtures to LED light fixtures in our living room" over in the Yahoo Deck House Owners Group https://groups.yahoo.com/neo/groups/deckhouseowners/conversations/messages/122 ... Complete with pictures!

Hello,
If
you don't want to remove the entire fluorescent light fixture from
behind the wood baffles in your Deck House you may want to consider
converting the fixtures to LED.

Parts required:

• Qty 12 of http://www.greenelectricalsupply.com/search.aspx?find=80-1254 "T8 Slide Mount Non-Shunted" sockets @ $1.55 each

• Qty 6 of http://www.greenelectricalsupply.com/search.aspx?find=9321 "3' 12W Gen7 ByPass T8 LED 5000K" light tubes @ $9.51 each

Total parts and shipping cost: $89.29.

I
posted photos in a new album Converting Fluorescent lites 2 LED
lites... The photos are named "Step #" to "Step n" to show the sequence I
followed:
https://groups.yahoo.com/neo/groups/deckhouseowners/photos/albums/1923154958

Feel free to contact me if you have any questions.

Start converting the LAST light in the sequence and testing each light
before moving onto the previous light in the series / chain. If you open
up the first and last light the last one is the fixture that doesn't
have wires LEAVING it. The first one has wires coming into it from the
wall and wires leading to the next light. In my case they were wired
left to right.

Time to complete: First light took me 30 minutes. Each additional light 10 to 15 minutes.

Dave

We have also been researching LED replacements for the living room valances --- we've found an affordable ---and customizable solution.....this company will make your LED strip lights with a diffuser cover to any length. The thing we were looking for was a solution to getting the lights to go from beam to beam ---and eliminating the dark zone that in our house has 12" in from each beam. This occurred because they had to but an outrigger hanger to carry the the valance --- therefore we had a 48" fluorescent strip in the center of each of our bays with about 12" of dark on either side ----so were looking at ordering from this company and getting a 12" for each side and a 48" in the middle .....here's a link:

www.glowbackledstore.com

Carpenter Bee time is here....the first carpenter bees appeared this week here in Maryland ---so today was carpenter bee prevention day at our house ---for years on our prior home I learned to use a 1 gallon pump sprayer with a bee kill/prevention mixture ---now on this new home we're on the same regiment ---if you coat the fascias and beams in the very beginning of spring it keeps the bees away all season--- and if there are any signs of strays buzzing the house later in the season, a quick reapply usually gets you thru the whole year ---they find other places to nest in the forest and stay away from the house .....don't wait till it's too late.....

Thanks for this! We live very close to you (in Lutherville, MD right next to BCC) and just purchased our deckhouse last August from the original owners. My husband and I noticed carpenter bee holes in our house and have had two exterminators out today to take a look. I'll be interested in hearing what they have to say as well.

My experience---Don't bother paying exterminators --- I've had cedar homes of my own for 20 years and designed many for clients of mine, and all you need to do is what I posted ---exterminators may spray diatomaceous powder into the nest holes ---that will kill bees in the nest and deter ones from re entering the nest hole --but it wont stop more bees from drilling more holes all over your house elsewhere-----I've done it all over the years --- just get a pump sprayer and coat the fascias and beams with the product I posted or one similar ---it will protect the house all summer.....and since you are so close we'd love to share house visits....write me at rob.architect.aia@gmail.com --- lets do home tours.....

Proud new classic Deck House owner in Winchester CT

my parents own the first deck house that was built in Pennsylvania, c. 1967.

Deck House for sale...

81 Mallard Rd

South Kingstown, RI
02879

$699,900 | 3 Bed • 2 Bath

http://www.realtor.com/realestateandhomes-detail/81-Mallard-Rd-S_South-Kingstown_RI_02879_M35393-36815

Deck House for sale...

26 Bentley Circle

Goshen, CT 06756

http://www.realtor.com/realestateandhomes-detail/26-Bentley-Cir_Goshen_CT_06756_M42476-60184?ex=CT597807953

We bought our Deck House in Arlington, VA last year and love it so much! I'll be writing about it in the August, 2017 issue of Washingtonian Magazine.

I have a Deck House in Princeton, NJ. Our house has the slanted windows over the living room which look great but are a maintenance bear. There are translucent exterior shades that roll down which are original to the house (1991) that I want to replace. Has anyone dealt with this? I'm concerned that the because of the angle of the windows the fabric actually touches the glass in spots which I am reading decreases the efficiency of the sun shade and can damage the glass.

Thanks,

Steve

Beautiful deck house! But if you put the solid surface bathtub in your bathroom, I think it’s perfect!

We have a deck house in southeastern PA in grey stained cedar that is about 30 years old. The siding is rotting all over from the ground up. We live in a wooded enough area that there is a lot of humidity. We are embarking on a major repair project to replace all or some of the siding. We have been recommended to use either pressure treated cedar with a new proper vapor barrier, or to go with one of many synthetic siding products.

While I love the wood aesthetic, I also LOVE the idea of maintenance free materials. I am looking for advice:

a) on proper materials and techniques to go under the siding to prevent recurrence of the rot.

b) recommendations for materials to use to replace the siding.

Thank you in advance for any help you can offer.

Jane

My company did a complete interior renovation on 1977 Acorn Deck House a long with many structural repairs to the deck and around sliders..Give us a Call for all your Deck House needs we service all of Rhode Island and Southern MA..call for a Free estimate...401-524-6454..Thanks Dwayne from ESHI Builders LLC

We just completed a fun whole-house remodel of a Deck House in Wilmington, DE. Check it out here:

https://www.houzz.com/projects/2654378

Just a little bling we threw into this 1977 Deck House Remodel...we love what we do, taking something old and breathing some new life back into it.

On the upper deck porches on our deckhouse we have a grey textured coating that almost feels rubber like. On the original blueprints it called for waterproof coating. The coating is in great shape but the color is very inconsistent and has a good bit of stains from use over the years. Does anyone have experience in what this coating could be or if a product that could be put over it to freshen the look? I am reluctant to paint it in case it has to breath or painting could somehow trap moisture or just end up not adhering and making it look worse in the future than it already does. Any advice or guidance would be appreciated!

I also meant to point it that it feels very gritty like a grip tape on a ramp or skateboard but when depressing with the fingernail you can tell it has some give to it....hence the rubber like description I mentioned before.

Hi Chad - It sounds like it could be something like this:

https://www.gulfsynthetics.com/deck-revive-kit.html

A polymer coating with grit that gets mixed with latex paint.

PS I just added you to the Facebook group - sign in and take a look around!

I am leaving California and moving back "home" next month. CA Eichler homes have always been out of my price range. Luckily we found a Deck House which I love even more! I just purchased this beauty and can't wait to move in. https://www.zillow.com/homes/155-Leed-St,-New-Kensington,-PA-15068_rb/

@jmccutcheon Congrats on your new home! If you have any questions about your Deck House, please call us at 800-727-3325 - our Parts & Service Dept would be happy to help you in any way we can.

Congrats @jmccutcheon - and good luck with the move!

We own a 1970+ Deck House bought by my husband in 1983. We've done several updates, but the bones are still the same. We love it and would like to find the same house we have in Maryland, but in North Carolina. Any suggestions as to how to go about finding one.

We just wrapped up this new deck addition to this 1989 Acorn Deck House

@ raznick_jm There is a closed Facebook page that is very active, and a number of deck house owners in MD and listings are posted from time to time.

Your layout is similar to ours. We are in Maryland, looking to find a Deck style in North Carolina

I own a Deck House in SE PA which had the slanting window roller curtain problems. Instead of trying to fix the system and replace the 25 year old curtain material, I came up with the solution as pictured. It has the added advantage of improved insulation and is maintenance free.

Our deck house in Sudbury, Mass has the original, dark stain on the t&g cedar/fur decking that forms the roof/ceiling. Does anyone have experience sanding this to make it lighter? Since a total makeover is on the horizon for this house, I'm thinking that sandblasting be an option. I've added <1 inch depth t&g boards to the bathroom to lighten it up, but the look is a bit shiny and un-Deck like.

Also, in response to an earlier post about the surfacing material for the flat-roof-deck over the garage, a Boston-area contractor recommended Duro Last membrane, and it is has held up very well.

Comment so I can follow

jraznick I am selling my childhood home in NC, a Deck House built near Chapel Hill in 1978. It breaks my heart to sell it, but we have to for my mother's long term care. It is a 4 BR, 2 BA with a bonus room and two decks. We have replaced the decks (the original decks were not stable). I love the house so much, what a privilege and a joy to have grown up in a deck house.

Hello Deck House Friends

Searching and searching in MD for a Deck House. Any suggestions for the best place to look? I noticed some people where from the Lutherville Loch Raven area. I had no idea there were any in the area. So far, I have only found one for sale in Westminster and it went to contract rather quickly. I will look into the Facebook group. Thanks for any guidance or recommendations.

Hello,

We own a 1984 deck house in a suburb of Boston (Harvard, MA). We having wooden sliding doors in 2 of the bathrooms. One of them is getting really unwieldy, does not slide smoothly and gets stuck.

Does anyone have experience with this issue? Any feedback or recommendations would be greatly appreciated.

Thanks!

Hello, I have a 1974 original deck house roof that needs replacing. If anyone has experience using metal options, I'd appreciate your opinions. HU-850445855 is your whole roof that standing seam? It looks great. Thank you.

I just want to say how fun it is to read this Board. As a newborn I was brought home to the a Deck House (in 1963) which my parents bought in 1961. It was in the first group of Deck Houses built in Concord, MA. The Headmistress of my school was Mrs. Berkes and my classmate and friend was the daughter of Mr. Brownell. It’s so fun to see the photographs and be taken back to then. My mother misses that house!

Hi - we just bought a deck house in Chapel Hill. We are loving it! And so glad there's a community. Looking for ideas on how to improve / redo the bathrooms. Any ideas out there?

Yahoo Groups is dead, but I've transitioned the site over to https://groups.io/g/deckhouseowners … Come and join us and please post!

Hi everyone, Yahoo Groups is shutting down, so I've moved us over to a new site. https://groups.io/g/deckhouseowners We really need posters there! If you sign up, you gain access to a lot of information, like how we thoroughly refinished the mahogany siding on our Deck House this summer, how to replace fluorescent cove lighting with LED lighting, and much more.

Hi, everyone! We just bought a 1974 Deck House in Maryland and expect to move there in about a month! Looking forward to ideas and inspirations. Thinking about painting exterior Cherokee red. Thoughts?

Hi , I have a beautifull Deck house 89 for sale near Princeton NJ . Look on zillow - in Pennington .

We have just listed our Deck House located in West Chester, PA. It was built as a Deck House model in 1989 and we purchased it directly from them in 1995. realtor.com/realestateandhomes-detail/1148-Saint-Finegan-Dr_West-Chester_PA_19382_M41101-83523 for further information

We will shortly be listing a Deck House in the Gaithersburg, Maryland, area. 5 bedrooms, 2.5 bathrooms, 3155 sq feet, in excellent condition. Let me know if you are interested.

We have a 1967 deck house an doing a first remodel of the Kitchen. I have a question on what kind of sub floor is necessary for 12 x 24 porcelain tiles without risking cracking. Currently there is 3/4 plywood on the deck boards and I am planning on using a decoupling membrane. What have others done? Thanks!

Hello Nathan. Have you contacted the Acorn Deck House Company yet? Steve Kay is their parts and service manager and has helped me with many things. I would start there. Here's a helpful link : https://www.deckhouse.com/owner-resources/ They also have a renovation guide!

Ah yes, thanks for the suggestion. They are the people to ask.