2012 NARI CAPITAL COTY, MERIT AWARD WINNER, RESIDENTIAL BATH $30,000 to $60,000 The owners of this contemporary home in Centreville, Virginia, had a dated master bathroom suite that didn’t meet their modern tastes or their needs. To make the changes they wanted, the design team at Michael Nash Design, Build & Homes determined that the room would need to be gutted. All the partition walls had to go, as did the old whirlpool tub. And all of the plumbing and fixtures had to be relocated to new positions to meet the new design’s criteria. The clients previously replaced the bathroom windows with glass blocks. Thus, contemporary glass blocks were used instead of partition walls to add openness to this new bathroom layout. Large polished limestone tiles were used on the bathroom floors and walls, and stylish glass tiles were used as an accent. A free-standing oval tub adds to the room’s contemporary look and saves a lot of space as well. A two-person shower stall with a modern body spray shower system was also installed. Custom built high level cabinetry and vanities, and modern lighting—both recessed and hanging fixtures— contribute greatly to the success of the final project.

Jennifer and Dan have lived in their Deer Park Illinois home for 15 years, slowly making minor fixes like painting and decorating; but they had a new plan for their kitchen the entire time. An awkwardly placed garage door, and an island cooktop with a terrible downdraft made a full-scale kitchen remodel an absolute must. Jennifer had many ideas in mind and wanted to work with a company that could provide high-end work, while partnering with a designer that would tailor the kitchen to her ideas. She was intrigued by the phrase “Common Sense Remodeling” in Advance Design’s feature she discovered while perusing an issue of the community’s Quintessential Barrington Magazine. Doing further research on the company’s website, as she looked through project profiles and read about Advance Design’s “Common Sense Remodeling” philosophy, she promptly scheduled an appointment to see if the people and ideas she read about were truly who they said they were. The more she read, the more she knew that the “Common Sense” approach to remodeling they described was exactly the type of company she was looking for. The partnership was sealed after an initial consultation with Owner Todd Jurs and Project Designer Michelle Lecinski. They displayed a combination of friendliness, professionalism and respect that was unmatched by any of the other companies Jennifer talked to. She knew that with Advance Design, she would be able to retain the vision that she had in mind with high-quality craftsmanship. “I reached out to Advance Design because of the ‘Common Sense Remodeling’ tagline,” Jennifer said. “That’s what lingered for me”. “Advance Design was the most respectful- of the house and of my design ideas, and the most professional of the handful of companies that looked at my project”. Soon after the meeting Jennifer began working with Michelle on the project design. They quickly developed chemistry. Jennifer loved how Michelle researched and located every detail that Jennifer wanted for the kitchen. Between the two of them, every concept and idea was worked through and perfected. “Jennifer had definite ideas about what she wanted the new kitchen to look like, she just didn’t know how to bring it all together. We worked together really well to make her ideas into the practical reality necessary for a well-functioning kitchen, with the look and feel that she had envisioned”, says Michelle. “Michelle was wonderful in using the CAD system she would show me new drawings every time we changed the layout while working through the design,” Jennifer said. “She was a really wonderful partner in execution, she made sure everything happened quickly and easily.” The finished design drew out elements of Jennifer’s style and personality. The pair call the look “sophisticated farmhouse” to describe the kitchen renovation to family and friends. The result was a beautifully crafted, authentic-feeling space that satisfied Jennifer’s dreams 15 years in the making. The whole project consisted of a kitchen remodel, mudroom upgrade with powder room, and garage entry relocation. “The projects I personally like the best, are the ones that put the client’s dreams on display,” Project Designer Michelle said. “And this is one of those projects.” The main focal point of the kitchen is custom zinc and brass ventilation hood with a vintage sheen, which was hand made to order by a small company in Indiana named Vogler Metalworking. “It’s like sculpture, a true work of art”, says Jennifer. Your eye is immediately drawn towards this elegant yet practical hood that eliminated the home’s downdraft problem and added a striking conversation piece at the same time. The carpenters had to use special gloves when transporting and installing it, so they didn’t smudge it with fingerprints. The beautiful hood centers proudly over the stunning black enamel and brass LaCornue Range. “I had a friend who had a LaCornue range and after learning how easy it was to cook perfect meals, I was convinced I wanted to have one”, says Jennifer. This unique, breathtaking combination anchors the entire kitchen and is apparent immediately as you walk into the great room the surrounds the space. DuraSupreme Crestwood cabinets with a Kendall Panel add function and sophistication. A custom gray paint color paired with a storm blue was developed so that the new kitchen looked like it belonged to the existing space. Unlacquered brass faucets and hardware were important to Jennifer because she wanted the living finishes to age over time. Remarkable brass diamond mesh cabinet door inserts imported from the UK continue to add this one-of-a-kind kitchen renovation; giving it a “you won’t see this everywhere” quality. The use of old railcar flooring for the coffee bar countertop and reclaimed oak for the open shelving gives an authenticity to the space uncommon in kitchens today. Jennifer and Michelle fell in love with the Limestone Grey Stone while they were investigating unique island countertop ideas. They liked the fact that the limestone as a living finish will age and change over time. Calcutta Miel Quartz countertops made for an excellent pairing around the perimeter, as it’s durable and perfect for cooking preparations. A textured white subway tile backsplash that runs to the ceiling keeps your eye moving towards the open shelving, and to the main focal point of the stunning range hood combination. “The kitchen functions beautifully, and it’s gorgeous,” beams Jennifer as she gestures with both hands while smiling ear to ear. “The most important thing was I wanted a kitchen that had a wonderful flow, cooked beautiful meals and was a great gathering place for family and friends, and this space does that perfectly! Beauty wise, it turned out exactly how I had envisioned. I felt the function part was the hardest part, and that was nailed”! Relocating the garage entry to the new mudroom was a huge priority and has finally separated the family’s arriving home functions from their kitchen. Now coats and shoes and bags have their own area for dropping once members arrive home. Matching gray DuraSupreme cabinetry helped create gorgeous, purposeful lockers for the family. A reclaimed vintage sink and custom wall paper were added to the tiny powder room to beautify the once previously only functional space. Advance Design was even able to create a custom space for their dog to sleep while the family is away. “It was unbelievable that a project of this size was completed in such a short time, and I think that’s because of the large amount of planning and preparation that went into it,” Jennifer marveled, “When we started, we were ready, and everything was prepared”. When it came to execution, Project Manager Justin Davis and his crew were quick, accessible, and organized. Projects like this kitchen are typically completed in as little as 8-10 weeks. Jennifer’s kitchen however despite the relocation of some challenging HVAC in a soffit and moving of an exterior door was completed remarkably fast in part because the team was working with an existing tile floor that ran throughout the first floor that the client really loved. “You get to know these people really well because they’re living in your house while you’re living in your house. They were so fast and really good, it didn’t take as long as even planned” reported Jennifer. “I would text Justin and he always responded almost immediately. I got to know all the guys who were working in our house and they were all wonderful people”. Details in a customized kitchen like this one require skill and care from the people who install it. “All the guys on the job were skilled at what the did. I wanted small details like little feet to look like furniture, that is where their carpentry skill came in to make these all perfect”, said Jennifer. “The tile guys were wonderful. They even let me determine how I wanted the texture with the grout to appear for a salt and pepper look; now that is a very skilled trade person making it custom”. In Jennifer’s interview, she continued to reference Advance Design’s “Common Sense Remodeling”, so I took a minute to ask her exactly what that phrase meant to her and how it played out in her experience with her project and the Advance Design team. Here is what she said: “I was intrigued about Common Sense Remodeling and in my head that there would be clear costs and prices, great communication between the design team, the execution team and me”, said Jennifer. They did deliver on that, it was so clear about the cost breakdown, what I could expect from everyone who came to my house, and everything that we had ordered. That to me is the Common Sense”! It’s great to see a client take literally our assertion that a well-planned remodeling project is simply “Common Sense”! She anticipated each step of the way would be clear, concise, and predictable, all the while protecting the outcome due to the careful upfront planning. “Advance Design delivered on their ‘Common Sense Remodeling’ promise,” Jennifer said. “From the design team, to the execution team - everything was straight forward like I imagined. The project turned out exactly how I envisioned, I enjoyed this process and absolutely would recommend Advance Design Studio to anyone.”

Designing and building a kitchen addition is a complex process that involves multiple steps and considerations. Here is a general outline to help you get started on your kitchen addition project: Define Your Goals and Budget: • Determine the purpose of the kitchen addition. Is it for more cooking space, a dining area, or a combination of both? • Establish a realistic budget for your project. Consider all costs, including construction, permits, materials, and furnishings. Hire a Design Professional: • Seek the services of a design build company who specializes in kitchen additions. • Discuss your vision, needs, and budget with the design professional to create a design concept. Site Evaluation: • Assess the existing space and structural condition of your home to ensure it can support the addition. • Consider factors like zoning regulations, setbacks, and building codes. Design Development: • Collaborate with your design professional to refine the concept, including the layout, size, and architectural style. • Choose materials, finishes, and fixtures that fit your design and budget. Obtain Permits: • Consult with your local design build contractor to determine the necessary permits and approvals. • Prepare and submit all required documents, including architectural drawings and engineering plans. Create Construction Documents: • Work with your design build professional to develop detailed construction drawings and specifications. • These documents will serve as a guide for contractors during construction. Hire a design build contractor: • Check references, credentials, and licenses before selecting a contractor. • Sign a detailed contract that outlines the scope of work, timeline, and payment schedule. Construction Phase: • Demolition: If needed, remove any existing structures or walls. • Foundation: Construct the foundation for the addition. • Framing: Build the structural framework of the addition. • Plumbing, Electrical, and HVAC: Install or update utilities as required. • Insulation: Ensure proper insulation for energy efficiency. • Drywall and Finish Work: Complete the walls and ceilings. • Flooring and Cabinetry: Install flooring and kitchen cabinets. • Appliances and Fixtures: Add appliances, plumbing fixtures, and lighting. • Paint and Finish: Apply paint and finishes to achieve the desired look. • Final Inspection: Schedule inspections to ensure compliance with building codes. Final Inspections and Approvals: • Arrange for final inspections to ensure the addition meets all safety and code requirements. • Obtain any necessary certificates of occupancy or compliance. Move In and Enjoy: • Once all inspections and approvals are received, you can move into your new kitchen addition and start enjoying it. Remember that every kitchen addition project is unique, so adapt this outline to your specific needs and circumstances. Consulting with professionals and obtaining the required permits and inspections is crucial to a successful and safe project.

Designing and building a kitchen addition is a complex process that involves multiple steps and considerations. Here is a general outline to help you get started on your kitchen addition project: Define Your Goals and Budget: • Determine the purpose of the kitchen addition. Is it for more cooking space, a dining area, or a combination of both? • Establish a realistic budget for your project. Consider all costs, including construction, permits, materials, and furnishings. Hire a Design Professional: • Seek the services of a design build company who specializes in kitchen additions. • Discuss your vision, needs, and budget with the design professional to create a design concept. Site Evaluation: • Assess the existing space and structural condition of your home to ensure it can support the addition. • Consider factors like zoning regulations, setbacks, and building codes. Design Development: • Collaborate with your design professional to refine the concept, including the layout, size, and architectural style. • Choose materials, finishes, and fixtures that fit your design and budget. Obtain Permits: • Consult with your local design build contractor to determine the necessary permits and approvals. • Prepare and submit all required documents, including architectural drawings and engineering plans. Create Construction Documents: • Work with your design build professional to develop detailed construction drawings and specifications. • These documents will serve as a guide for contractors during construction. Hire a design build contractor: • Check references, credentials, and licenses before selecting a contractor. • Sign a detailed contract that outlines the scope of work, timeline, and payment schedule. Construction Phase: • Demolition: If needed, remove any existing structures or walls. • Foundation: Construct the foundation for the addition. • Framing: Build the structural framework of the addition. • Plumbing, Electrical, and HVAC: Install or update utilities as required. • Insulation: Ensure proper insulation for energy efficiency. • Drywall and Finish Work: Complete the walls and ceilings. • Flooring and Cabinetry: Install flooring and kitchen cabinets. • Appliances and Fixtures: Add appliances, plumbing fixtures, and lighting. • Paint and Finish: Apply paint and finishes to achieve the desired look. • Final Inspection: Schedule inspections to ensure compliance with building codes. Final Inspections and Approvals: • Arrange for final inspections to ensure the addition meets all safety and code requirements. • Obtain any necessary certificates of occupancy or compliance. Move In and Enjoy: • Once all inspections and approvals are received, you can move into your new kitchen addition and start enjoying it. Remember that every kitchen addition project is unique, so adapt this outline to your specific needs and circumstances. Consulting with professionals and obtaining the required permits and inspections is crucial to a successful and safe project.

Designing and building a kitchen addition is a complex process that involves multiple steps and considerations. Here is a general outline to help you get started on your kitchen addition project: Define Your Goals and Budget: • Determine the purpose of the kitchen addition. Is it for more cooking space, a dining area, or a combination of both? • Establish a realistic budget for your project. Consider all costs, including construction, permits, materials, and furnishings. Hire a Design Professional: • Seek the services of a design build company who specializes in kitchen additions. • Discuss your vision, needs, and budget with the design professional to create a design concept. Site Evaluation: • Assess the existing space and structural condition of your home to ensure it can support the addition. • Consider factors like zoning regulations, setbacks, and building codes. Design Development: • Collaborate with your design professional to refine the concept, including the layout, size, and architectural style. • Choose materials, finishes, and fixtures that fit your design and budget. Obtain Permits: • Consult with your local design build contractor to determine the necessary permits and approvals. • Prepare and submit all required documents, including architectural drawings and engineering plans. Create Construction Documents: • Work with your design build professional to develop detailed construction drawings and specifications. • These documents will serve as a guide for contractors during construction. Hire a design build contractor: • Check references, credentials, and licenses before selecting a contractor. • Sign a detailed contract that outlines the scope of work, timeline, and payment schedule. Construction Phase: • Demolition: If needed, remove any existing structures or walls. • Foundation: Construct the foundation for the addition. • Framing: Build the structural framework of the addition. • Plumbing, Electrical, and HVAC: Install or update utilities as required. • Insulation: Ensure proper insulation for energy efficiency. • Drywall and Finish Work: Complete the walls and ceilings. • Flooring and Cabinetry: Install flooring and kitchen cabinets. • Appliances and Fixtures: Add appliances, plumbing fixtures, and lighting. • Paint and Finish: Apply paint and finishes to achieve the desired look. • Final Inspection: Schedule inspections to ensure compliance with building codes. Final Inspections and Approvals: • Arrange for final inspections to ensure the addition meets all safety and code requirements. • Obtain any necessary certificates of occupancy or compliance. Move In and Enjoy: • Once all inspections and approvals are received, you can move into your new kitchen addition and start enjoying it. Remember that every kitchen addition project is unique, so adapt this outline to your specific needs and circumstances. Consulting with professionals and obtaining the required permits and inspections is crucial to a successful and safe project.

Designing and building a kitchen addition is a complex process that involves multiple steps and considerations. Here is a general outline to help you get started on your kitchen addition project: Define Your Goals and Budget: • Determine the purpose of the kitchen addition. Is it for more cooking space, a dining area, or a combination of both? • Establish a realistic budget for your project. Consider all costs, including construction, permits, materials, and furnishings. Hire a Design Professional: • Seek the services of a design build company who specializes in kitchen additions. • Discuss your vision, needs, and budget with the design professional to create a design concept. Site Evaluation: • Assess the existing space and structural condition of your home to ensure it can support the addition. • Consider factors like zoning regulations, setbacks, and building codes. Design Development: • Collaborate with your design professional to refine the concept, including the layout, size, and architectural style. • Choose materials, finishes, and fixtures that fit your design and budget. Obtain Permits: • Consult with your local design build contractor to determine the necessary permits and approvals. • Prepare and submit all required documents, including architectural drawings and engineering plans. Create Construction Documents: • Work with your design build professional to develop detailed construction drawings and specifications. • These documents will serve as a guide for contractors during construction. Hire a design build contractor: • Check references, credentials, and licenses before selecting a contractor. • Sign a detailed contract that outlines the scope of work, timeline, and payment schedule. Construction Phase: • Demolition: If needed, remove any existing structures or walls. • Foundation: Construct the foundation for the addition. • Framing: Build the structural framework of the addition. • Plumbing, Electrical, and HVAC: Install or update utilities as required. • Insulation: Ensure proper insulation for energy efficiency. • Drywall and Finish Work: Complete the walls and ceilings. • Flooring and Cabinetry: Install flooring and kitchen cabinets. • Appliances and Fixtures: Add appliances, plumbing fixtures, and lighting. • Paint and Finish: Apply paint and finishes to achieve the desired look. • Final Inspection: Schedule inspections to ensure compliance with building codes. Final Inspections and Approvals: • Arrange for final inspections to ensure the addition meets all safety and code requirements. • Obtain any necessary certificates of occupancy or compliance. Move In and Enjoy: • Once all inspections and approvals are received, you can move into your new kitchen addition and start enjoying it. Remember that every kitchen addition project is unique, so adapt this outline to your specific needs and circumstances. Consulting with professionals and obtaining the required permits and inspections is crucial to a successful and safe project.

Designing and building a kitchen addition is a complex process that involves multiple steps and considerations. Here is a general outline to help you get started on your kitchen addition project: Define Your Goals and Budget: • Determine the purpose of the kitchen addition. Is it for more cooking space, a dining area, or a combination of both? • Establish a realistic budget for your project. Consider all costs, including construction, permits, materials, and furnishings. Hire a Design Professional: • Seek the services of a design build company who specializes in kitchen additions. • Discuss your vision, needs, and budget with the design professional to create a design concept. Site Evaluation: • Assess the existing space and structural condition of your home to ensure it can support the addition. • Consider factors like zoning regulations, setbacks, and building codes. Design Development: • Collaborate with your design professional to refine the concept, including the layout, size, and architectural style. • Choose materials, finishes, and fixtures that fit your design and budget. Obtain Permits: • Consult with your local design build contractor to determine the necessary permits and approvals. • Prepare and submit all required documents, including architectural drawings and engineering plans. Create Construction Documents: • Work with your design build professional to develop detailed construction drawings and specifications. • These documents will serve as a guide for contractors during construction. Hire a design build contractor: • Check references, credentials, and licenses before selecting a contractor. • Sign a detailed contract that outlines the scope of work, timeline, and payment schedule. Construction Phase: • Demolition: If needed, remove any existing structures or walls. • Foundation: Construct the foundation for the addition. • Framing: Build the structural framework of the addition. • Plumbing, Electrical, and HVAC: Install or update utilities as required. • Insulation: Ensure proper insulation for energy efficiency. • Drywall and Finish Work: Complete the walls and ceilings. • Flooring and Cabinetry: Install flooring and kitchen cabinets. • Appliances and Fixtures: Add appliances, plumbing fixtures, and lighting. • Paint and Finish: Apply paint and finishes to achieve the desired look. • Final Inspection: Schedule inspections to ensure compliance with building codes. Final Inspections and Approvals: • Arrange for final inspections to ensure the addition meets all safety and code requirements. • Obtain any necessary certificates of occupancy or compliance. Move In and Enjoy: • Once all inspections and approvals are received, you can move into your new kitchen addition and start enjoying it. Remember that every kitchen addition project is unique, so adapt this outline to your specific needs and circumstances. Consulting with professionals and obtaining the required permits and inspections is crucial to a successful and safe project.

2012 NARI CAPITAL COTY, MERIT AWARD WINNER, RESIDENTIAL BATH $30,000 to $60,000 The owners of this contemporary home in Centreville, Virginia, had a dated master bathroom suite that didn’t meet their modern tastes or their needs. To make the changes they wanted, the design team at Michael Nash Design, Build & Homes determined that the room would need to be gutted. All the partition walls had to go, as did the old whirlpool tub. And all of the plumbing and fixtures had to be relocated to new positions to meet the new design’s criteria. The clients previously replaced the bathroom windows with glass blocks. Thus, contemporary glass blocks were used instead of partition walls to add openness to this new bathroom layout. Large polished limestone tiles were used on the bathroom floors and walls, and stylish glass tiles were used as an accent. A free-standing oval tub adds to the room’s contemporary look and saves a lot of space as well. A two-person shower stall with a modern body spray shower system was also installed. Custom built high level cabinetry and vanities, and modern lighting—both recessed and hanging fixtures— contribute greatly to the success of the final project.

Example of a transitional white tile gray floor bathroom design in Phoenix with shaker cabinets, white cabinets, white walls, an undermount sink and white countertops

Tips on how to hang the perfect gallery wall 1. Frame Arrangement: Lay out the frames on the floor to determine your desired composition. 2. Create paper cutouts of your frames: lay your frames out on paper, trace around the outside, and cut out the shapes. Note which cutout goes with which frame. 3. Locate hook location: Hold the wire taught and measure from the top edge to the center point of the wire. Make a mark on the cutout where the hook catches the wire. 4. Tape cutouts to the wall, with painters/masking tape, mimicking the arrangement on the floor. If you do not like how it looks on your wall, repeat step 1 and then skip to step 4. 5. Final details: Adjust cutouts until all pieces are lined up exactly as you like. 6. Hammer the hooks in where indicated on the paper, remove the cutouts, and hang frames. You should be left with the perfect gallery wall, no re-nailing or measuring needed.

2012 NARI CAPITAL COTY, MERIT AWARD WINNER, RESIDENTIAL BATH $30,000 to $60,000 The owners of this contemporary home in Centreville, Virginia, had a dated master bathroom suite that didn’t meet their modern tastes or their needs. To make the changes they wanted, the design team at Michael Nash Design, Build & Homes determined that the room would need to be gutted. All the partition walls had to go, as did the old whirlpool tub. And all of the plumbing and fixtures had to be relocated to new positions to meet the new design’s criteria. The clients previously replaced the bathroom windows with glass blocks. Thus, contemporary glass blocks were used instead of partition walls to add openness to this new bathroom layout. Large polished limestone tiles were used on the bathroom floors and walls, and stylish glass tiles were used as an accent. A free-standing oval tub adds to the room’s contemporary look and saves a lot of space as well. A two-person shower stall with a modern body spray shower system was also installed. Custom built high level cabinetry and vanities, and modern lighting—both recessed and hanging fixtures— contribute greatly to the success of the final project.

2012 NARI CAPITAL COTY, MERIT AWARD WINNER, RESIDENTIAL BATH $30,000 to $60,000 The owners of this contemporary home in Centreville, Virginia, had a dated master bathroom suite that didn’t meet their modern tastes or their needs. To make the changes they wanted, the design team at Michael Nash Design, Build & Homes determined that the room would need to be gutted. All the partition walls had to go, as did the old whirlpool tub. And all of the plumbing and fixtures had to be relocated to new positions to meet the new design’s criteria. The clients previously replaced the bathroom windows with glass blocks. Thus, contemporary glass blocks were used instead of partition walls to add openness to this new bathroom layout. Large polished limestone tiles were used on the bathroom floors and walls, and stylish glass tiles were used as an accent. A free-standing oval tub adds to the room’s contemporary look and saves a lot of space as well. A two-person shower stall with a modern body spray shower system was also installed. Custom built high level cabinetry and vanities, and modern lighting—both recessed and hanging fixtures— contribute greatly to the success of the final project.

2012 NARI CAPITAL COTY, MERIT AWARD WINNER, RESIDENTIAL BATH $30,000 to $60,000 The owners of this contemporary home in Centreville, Virginia, had a dated master bathroom suite that didn’t meet their modern tastes or their needs. To make the changes they wanted, the design team at Michael Nash Design, Build & Homes determined that the room would need to be gutted. All the partition walls had to go, as did the old whirlpool tub. And all of the plumbing and fixtures had to be relocated to new positions to meet the new design’s criteria. The clients previously replaced the bathroom windows with glass blocks. Thus, contemporary glass blocks were used instead of partition walls to add openness to this new bathroom layout. Large polished limestone tiles were used on the bathroom floors and walls, and stylish glass tiles were used as an accent. A free-standing oval tub adds to the room’s contemporary look and saves a lot of space as well. A two-person shower stall with a modern body spray shower system was also installed. Custom built high level cabinetry and vanities, and modern lighting—both recessed and hanging fixtures— contribute greatly to the success of the final project.

Tips on how to hang the perfect gallery wall 1. Frame Arrangement: Lay out the frames on the floor to determine your desired composition. 2. Create paper cutouts of your frames: lay your frames out on paper, trace around the outside, and cut out the shapes. Note which cutout goes with which frame. 3. Locate hook location: Hold the wire taught and measure from the top edge to the center point of the wire. Make a mark on the cutout where the hook catches the wire. 4. Tape cutouts to the wall, with painters/masking tape, mimicking the arrangement on the floor. If you do not like how it looks on your wall, repeat step 1 and then skip to step 4. 5. Final details: Adjust cutouts until all pieces are lined up exactly as you like. 6. Hammer the hooks in where indicated on the paper, remove the cutouts, and hang frames. You should be left with the perfect gallery wall, no re-nailing or measuring needed.

2012 NARI CAPITAL COTY, MERIT AWARD WINNER, RESIDENTIAL BATH $30,000 to $60,000 The owners of this contemporary home in Centreville, Virginia, had a dated master bathroom suite that didn’t meet their modern tastes or their needs. To make the changes they wanted, the design team at Michael Nash Design, Build & Homes determined that the room would need to be gutted. All the partition walls had to go, as did the old whirlpool tub. And all of the plumbing and fixtures had to be relocated to new positions to meet the new design’s criteria. The clients previously replaced the bathroom windows with glass blocks. Thus, contemporary glass blocks were used instead of partition walls to add openness to this new bathroom layout. Large polished limestone tiles were used on the bathroom floors and walls, and stylish glass tiles were used as an accent. A free-standing oval tub adds to the room’s contemporary look and saves a lot of space as well. A two-person shower stall with a modern body spray shower system was also installed. Custom built high level cabinetry and vanities, and modern lighting—both recessed and hanging fixtures— contribute greatly to the success of the final project.

Inspiration for a large rustic u-shaped brick floor and orange floor eat-in kitchen remodel in Denver with an undermount sink, green cabinets, multicolored backsplash, an island, multicolored countertops, paneled appliances, raised-panel cabinets, granite countertops and stone slab backsplash

Build your dream home and choose the upgrades on this waterfront lot on the St. Johns River. Nestled in a cove with open water view, beautiful trees, this is a special find. 113' waterfront. 4ft + depth on the water. Peaceful and serene setting yet close to shopping. Drinking well already in place. Home shown can be built to suit your taste. Open, split floor plan, Kitchen overlooks family room and cafe siting area. Formal dining room, plenty of storage space and three car garage. Many extra options available to add on...summer kitchen, extended laundry, 4th bedroom, home office and bonus room. This distinctive property is waiting for your personalization. Final pricing determined once buyer has made selections & customizations.

2012 NARI CAPITAL COTY, MERIT AWARD WINNER, RESIDENTIAL BATH $30,000 to $60,000 The owners of this contemporary home in Centreville, Virginia, had a dated master bathroom suite that didn’t meet their modern tastes or their needs. To make the changes they wanted, the design team at Michael Nash Design, Build & Homes determined that the room would need to be gutted. All the partition walls had to go, as did the old whirlpool tub. And all of the plumbing and fixtures had to be relocated to new positions to meet the new design’s criteria. The clients previously replaced the bathroom windows with glass blocks. Thus, contemporary glass blocks were used instead of partition walls to add openness to this new bathroom layout. Large polished limestone tiles were used on the bathroom floors and walls, and stylish glass tiles were used as an accent. A free-standing oval tub adds to the room’s contemporary look and saves a lot of space as well. A two-person shower stall with a modern body spray shower system was also installed. Custom built high level cabinetry and vanities, and modern lighting—both recessed and hanging fixtures— contribute greatly to the success of the final project.

2012 NARI CAPITAL COTY, MERIT AWARD WINNER, RESIDENTIAL BATH $30,000 to $60,000 The owners of this contemporary home in Centreville, Virginia, had a dated master bathroom suite that didn’t meet their modern tastes or their needs. To make the changes they wanted, the design team at Michael Nash Design, Build & Homes determined that the room would need to be gutted. All the partition walls had to go, as did the old whirlpool tub. And all of the plumbing and fixtures had to be relocated to new positions to meet the new design’s criteria. The clients previously replaced the bathroom windows with glass blocks. Thus, contemporary glass blocks were used instead of partition walls to add openness to this new bathroom layout. Large polished limestone tiles were used on the bathroom floors and walls, and stylish glass tiles were used as an accent. A free-standing oval tub adds to the room’s contemporary look and saves a lot of space as well. A two-person shower stall with a modern body spray shower system was also installed. Custom built high level cabinetry and vanities, and modern lighting—both recessed and hanging fixtures— contribute greatly to the success of the final project.