The s-Table has originally been designed for the educational room of the Stedelijk Museum ‘s-Hertogenbosch together with the s-Chair. It is unique by its sturdy and robust design. The combination of solid oak with plywood elements give theis table an uncomplicated though rich appearance. The Duropal top layer makes this table extra durable and suitable for a multifunctional work space. design by Jeroen Wand photo credits by Jeroen van der Wielen

Durat recycled pink countertop

Schuh Box Photos
Transitional bedroom photo in Denver with brown walls

Kousa Dogwoods frame the granite autocourt. The challenge of this site was to design functional living spaces while resolving a series of problems. Two entry courts offer suitable welcomes to the home: a formal granite court that is approached from above as one descends down a once blind driveway, and a more utilitarian play court off the garage. The rear yard, once disconnected from the house, is terraced and suitable for entertaining. A granite stair descends from the terrace to a new expanded lower lawn. A custom fire pit sits off the upper terrace and provides a more intimate gathering space.

ABS Shutters This material is extremely hard wearing, making it ideal for commercial installations. Our Shutters are manufactured using a hardwood core combined with an ABS (Acrylonitrile Butadiene Styrene) plastic coating.

Beach style living room photo in Boston

Located on a heritage-lined street in Melbourne’s Williamstown, a young family were seeking a contemporary home with ample room to grow. Benni Trajcevski of Achieve Design Group answered their call, creating the epitome of modern living concealed behind a modest façade. To achieve the long wish list including large indoor and outdoor gathering spaces to entertain family and friends, separate adult and children living and sleeping zones, and a pool suitable for year-round use, Benni has maximised every inch of the block. Seamless transitional spaces link inside with out. This flow between the indoors and outdoors is a key feature of the home, achieved through generous open floor planning and glazing. For example, large hidden sliding doors allow the pool to be closed-off for use in winter; acrylic glass panels link the pool with the sunken lounge, which includes a fire pit for year-round comfort. The inclusion of a courtyard and voids throughout create separate useable zones while maintaining the feeling of spaciousness. Orientated to the north and surrounded with floor to ceiling windows to optimise natural light, the courtyard divides the formal lounge area with the informal living area, while the first floor is divided into four separate wings for privacy and functionality. The interiors are detailed with quality materials and finishes to achieve a sleek and sophisticated aesthetic. Contrasting materials in muted tones, including tiles, steel and lightweight timbers are featured throughout. Corian and a moss green wall are unexpected features.

Situated in rural east Templeton is the Santa Barbara style estate that is the Castillo Residence. It exemplifies the classic nature of old world Spain, sporting massive timber trusses, authentic terra cotta tile flooring and pristine white washed walls. The entry to the residence is suitably grand, with a sweeping stair case up to a landing that overlooks the antique wood front door. The house boasts lofty ceilings in the great room, and a two story library complete with spiral stair case. This house was not only designed to suit its human residents but also its canine residents, and they have their own room off of the 5-car garage at the lower level. The master suite occupies a full wing of the residence, at a mere 1,700 square feet, providing space for a master sitting room, bedroom, bathroom, and sprawling walk in closets with laundry facilities. There are a plethora of outdoor living spaces, including a full outdoor kitchen, reflecting pool water feature and massive covered porches overlooking the Templeton countryside.

Solid Wood Floors Solid floors are made with planks of solid wood, usually ¾ to 5/16” thick. Because they are solid, they can be sanded and refinished many times, giving them a long life span. They can be installed over a plywood subfloor at or above grade. They are not suitable for installation in basements. Engineered Wood Floors Engineered hardwoods are made with layers of wood veneers bonded together. The top layer is a finished wood that can be resanded a limited number of times depending on its thickness. Because it features multiple sublayers laid in opposing directions, it is more stable than solid hardwood and resists warping and damage from moisture better. For that reason engineered wood floors can be laid over concrete subfloors in addition to wood and are suitable for use in basements. Wood Species Color and Grain Hardwood floors are produced from the wood of many species of trees, each offering different qualities that affect their appearance and performance. Some woods such as oak have prominent grain patterns; others, like cherry, have very mild graining. Every variety of wood also has unique natural coloring that affects its finished color when stained. In addition, woods vary in their hardness, which affects how easily they will dent and scratch under regular use. In general, the harder the wood, the greater its scratch and dent resistance. Learn more on our website

The walled terrace overlooks the backyard. The challenge of this site was to design functional living spaces while resolving a series of problems. Two entry courts offer suitable welcomes to the home: a formal granite court that is approached from above as one descends down a once blind driveway, and a more utilitarian play court off the garage. The rear yard, once disconnected from the house, is terraced and suitable for entertaining. A granite stair descends from the terrace to a new expanded lower lawn. A custom fire pit sits off the upper terrace and provides a more intimate gathering space.

Hostas and evergreens form a lush green wall. The challenge of this site was to design functional living spaces while resolving a series of problems. Two entry courts offer suitable welcomes to the home: a formal granite court that is approached from above as one descends down a once blind driveway, and a more utilitarian play court off the garage. The rear yard, once disconnected from the house, is terraced and suitable for entertaining. A granite stair descends from the terrace to a new expanded lower lawn. A custom fire pit sits off the upper terrace and provides a more intimate gathering space.

Home > Products Crystallized Glass,Crystallized stone 6 Crystallized Glass,Crystallized stone,Crystallized glass panel Marmoglass,Nanoglass,Marmoglass Composite Collectively referred to as Crystallized Glass Crystallized Glass Application: 1). Interior & external wall cladding 2). Flooring Tile, Stair, Column cladding 3). Basin, Countertop, Table, Bar 4). bath, Kitchen, any tops, round pillar and furniture decoration etc . Crystal white is a kind of artificial stone . It is made of glass ,which should be burned in the oven for two days under the more than 1000C temperature . It is much different from natural stone from all sides. 1. Natural and soft texture, 2. Varied colors such white, beige, carrara white 3. Good weather resisting property and durability 4. Zero percent of water absorption , not be polluted easily 5. Green environmental building material 6. High-intensity, light weight 7. Bending formation, economical, time saving 8. scratch resistant ,withstand high-heat . More details about it : 1. There are more than 10 colors of crystallized glass panel products available: Pure white, yellow, silver yellow, silver grey, grey in white, grey spot white, USA grey spot white, yellow in white…. 2. Panel thickness: 10-30MM 3. Normal specifications (mm): 1800*3000*18 1200*2400*18 600*600*18 1200*1200*18 1600*2400*18 1800*3000*30 800*800*18 1000*1000*18 Thin tiles: 305*305*12mm, 450*450*12mm 457*457*12mm, 400*400*12mm 600*600*12mm 1200*2400*12mm 4. Material: crystal quartz sand 5. Packaging: Fumigated wooden crates, Bundles,foam 6. Brand name: China Marmoglass / Nanoglass 7. Place of origin: Xiamen, Fujian ,China 8. Model NO.: GS001, SN002, NANO2009, NNAO2011 9. Supply ability: 20000M2/MONTH, 30TON/DAY 10. Delivery time: generally within 10 days, after the order confirmed and the deposit received 11. Arc panel specifications (mm): Thickness: 18-30mm Diameter : 30cm-120cm 1.What is crystallized glass stone(Marmoglass SN002 )? The micro crystal stone is an innovative product designed as a substitute for the rare natural white marble. It is superior to the natural white marble in terms of characteristics, where the micro crystal stone possesses extreme density making it anti-breakage, giving it zero water absorption qualities, and making it resistant to acidic and alkaline substances. at the pace that mankind is consuming the natural resources in today’s world, the micro crystal stone is the ultimate solution, the superior alternative for the external and internal applications. It is certainly a revolutionary product and the finest construction material of the 21st century. 2.Why choose crystallized glass stone(Marmoglass SN002)? The micro-crystal stone, also known as the micro-crystal glass, Marmoglass, is a new type of high-level decoration material. It is derived from natural inorganic material through a high temperature process, and it possesses excellent characteristics including the followings: 1. High Performance The micro-crystal stone has even texture and high density, which makes it crush resistant, anti-bending and high resistant resulting its performance being higher than natural stone. It can be used for long period with minimal damage. 2. Acid-proof alkalinity and anti-corrosion Not only does the micro-crystal stone posses special micro-crystal characteristics, it also has special glass features such as a fine texture, shiny surface and light reflection effect. 3. Fine Texture We have the flexibility to manufacture any colors as per customer requirements while also making up the defect of color differences, which exists in natural stone. While the product is widely used for interior and interior decoration of star-level hotels, subways, local landmark buildings, airports, and office building etc, it is more suitable for high-level home decoration. 4. Pollution-resistance and easy maintenance The micro-crystal is a kind of inorganic crystalline material with stable chemical characteristics. Its acid proof alkalinity and anti-corrosion nature are superior to nature stone, specifically its anti-weather characteristics whereby it is unaffected by the wind or sunlight. 5.A wide application range The water absorption rare of micro-crystal is quite low, close to zero. Several types of dirty pulps and dyed solution have difficulty in penetrating it. Any dirt on the surface is easily cleaned and it is convenient to mankind. 6. Heat-bend reformation With the heating method, the micro-crystal can be made into various arched profiles and arched slabs. the process is simple and it allows us to save time, cost, material and resources. 7. No radioactive elements In the process of manufacturing the micro-crystal stone, we have integrated the elimination of all the harmful radioactive elements that are found in natural stone from its components. It is therefore the safest and most environmentally friendly building material in our modern world. Crystallized glass can be processed into slab, tile, countertop, column and vanity top, wash basin and etc. It is applicable for flooring, interior and exterior wall cladding, stairs and table. Contributed to the character of no color difference, so it is widely used for top grade hotel, business building shopping mall and such great construction. Physical Parameter Density 2.70 g/cm Water Absorption 0.01% Compressive Strength 126 Mpa Radioactive Class A (Suitable for indoor and outdoor) Size Slabs 2400/2600/2800/3000 x 1800/1600/1400/1500mm Cut-to-size Tiles 30 / 40 / 50 / 60 / 80 / 100cm X 30 /40/50 /60/80 /100cm 12"x12", 24"X12", 24"x24" or customized size Thickness 1.2cm,1.8cm (3/4'), 2.0cm, 2.5cm, 3.0cm, Finishing Polished, honed Usage Flooring, Walls, Stairs / Steps, Counter tops, Vanity, Paving / Curbstone, Pillar, Column, Border, Skirting, Window Sills Quality Control Thickness Tolerance +- 1mm; Polishing Grade above 100 degree Crack / Spot EU / US Standard: zero QC Standard AQL2.5/4.0 ITS Certificate CE, ISO, GB/T19001-2008 Advantage 1. Own factory with stable supply; 2. Factory direct with good price and prompt delivery; 3. Good Management System for good quality; 4. Value-added service. large glass white artificial stone of Packing Inner Packing Cover with foam and plastic film, corner paper board protection Individual Carton Individual carton packing with trademark is available upon request Outer Packing Plastic tapes in 6 sides, further strengthened with iron sheet in the corner Shipping Mark OEM Port of Loading Xiamen Port of China Delivery Lead Time Normally 10-15 days for one 20’ GP, faster delivery is available upon confirmation Trade Term FOB, CFR, CIF, etc. Loading Info. Thickness Qty per pallet Pallets per 20ft container QTY per 20ft container Square Meter per 20ft container Weight per 20ft container Big slab size 3000*1200mm 12mm 25pcs 7 175pcs 600-900 m2 21000kgs 3000*1400mm 15mm 20pcs 7 175pcs 500-700 m2 21000kgs 3000*1600mm 20mm 15pcs 7 105pcs 350-500 m2 21000kgs 3200*1600mm 30mm 10pcs 7 70pcs 250-358 m2 21000kgs Installation Recommendations Wall Cladding 1.Wall should be leveled and cleaned, 2.Fix the panel on the wall with wire and expansion screw tightly, 3.Fill the space between the panel and the wall with cement mortar of ratio 1:3, 4.Clean the extra mortar and dirt on the surface. Floor Installation 1.Mark out the baseline of gound level, 2.Mix the mortar with ratio of 1 cement to 4 sand to have semi-day mortar, 3.Lay the mixed mortar in level with a layer of 3-4cm thickness,place the tile over the mortar and adjust the height properly to be leveled, 4.Remove the tile after level adjustment.Put a thin layer of cement powder on the mortar and add water on it to become wet, 5.Put the tile on top and gently knock with rubber hammer until it sealed with the mortar properly. Make sure the tile is leveled and has the same space between each other. Those tiles which are not leveled with others should be removed and repeat the leveling procedure in step 4.Genetally,the space between two tiles should be 2mm for water evaporation and normal expansion. Daily maintenance of Micro Crystal Stone 1.The laying area of micro crystal stone can only be opened for use or stacking any item on top after at least 24 hours of filling the gap, 2.The ground must be covered with plywood or carpet for protection in case of doing other decoration work after the installation of micro crystal stone floor, 3.In areas like exit and entrance, the surface of micro crystal stone floor should be covered by carpet or plywood to protect it from the damage of abrasion of sand or other hard material. 4.Do not use general floor wax on micro crystal stone,General floor wax is an oil-based wax which is easily stuck to dust. 5.Please use rubber wheels for shopping cart and trolley on micro crystal stone floor, for the hard wheel may scratch and damage the surface, 6.Regular care and maintenance is the key for long lasting of micro crystal stone’s high glossy and reflection. Important Notice 1.Make sure the ground of laying area is dry and clean before laying mortar. The ratio 1:3(volume ratio) must be strictly followed and no extra water added during the installation progress 2.In the choice of using white cement as the filling material, the strength and quality of the cement must be checked properly. 3.It is not recommended to store micro crystal stone outdoor for long time. It should be covered with rock wool in winter and moved into indoor 2 hours in advance before installation. It also needs to be covered with waterproof cloth when installing during the rainy days outdoor, 4.When using micro crystal stone as ground floor,2mm wild gap must be left between the joints for the benefit of the water vaporization and physical expansion. In the case of large-scale installation, it is recommended to leave an 8mm expansion joint, 5.It is recommended that the area of micro crystal stone to remain-not used-for at least 24 hours and kept 2-3 days before passing or storing items on top. Marmoglass Polished Edge, Shining ! China Marmoglass SN002 Slabs Packing and Ready for ship We not only make Slabs, we also can make: - Project Tiles - Countertop - Tabletop - Vanitytop - Column Tags: Marmoglass, Crystallized glass panel, nano crystallized glass panel, pore marmoglass, pore crystallized glass panel, Artificial Stone, Hole-Free Micro Crystal Stone, Pure white stone, Crystallized glass tile, Crystal glass tile, pure white artificial white marble, Marmo Glass, Glass Marble, White Marble, Marmoglass, nano marmoglass, no pore marmoglass, non-pore crystallized glass panel, glass marble, white marble, crystal white marble, white stone, white marble tile, Micro-crystal stone, Crystallized glass, Crystallized White Stone, Crystallized White Stone, Micro-crystallized composite tile, Hole-Free Micro Crystal Stone, Micro-crystallized composite tile, White Marble Tiles, pure white marble China Marmoglass SN002 Strong Packing Crates China Marmoglass SN002 and Nanoglass NANO3 Container Loading Welcome to our product page of China Marmoglass, in which you can find detailed information of Marmoglass. China Marmoglass Co.,Limited offer Crystallized White Marmoglass is good in quality and competitive in price. China Marmoglass Co.,Limited is the manufacturer and supplier of Marmoglass,White Crystallized Glass Panel,Nanoglass. Crystallized Glass Stone,Crystallized Glass Panel,Crystallized Glass Stone Tile,Crystallized Glass Stone Countertop,Marmoglass also known as Nanoglass and White Crystallized Glass,Marmoglass, Crystallized Glasss is the popular materials for interior and exterior applications, including kitchen countertops, bathroom vanities, commercial foyer wall claddings, etc. China Marmoglass Co.,Limited is the Manufacturer and export Crystallized Glass and Crystallized Glass products. Crystallized Glass can be used Interior & external wall cladding, Flooring Tile, Stair, Column cladding, Basin, Countertop, Table, Bar, bath, Kitchen, any tops, round pillar and furniture decoration etc. Super White Nanoglass Slab, You Can Buy Various High Quality Super White Nanoglass Slab Products from Super White Nanoglass Slab Suppliers and Super White Nanoglass Slab Manufacturers at Chinamarmoglass.com

Home > Products Crystallized Glass,Crystallized stone 6 Crystallized Glass,Crystallized stone,Crystallized glass panel Marmoglass,Nanoglass,Marmoglass Composite Collectively referred to as Crystallized Glass Crystallized Glass Application: 1). Interior & external wall cladding 2). Flooring Tile, Stair, Column cladding 3). Basin, Countertop, Table, Bar 4). bath, Kitchen, any tops, round pillar and furniture decoration etc . Crystal white is a kind of artificial stone . It is made of glass ,which should be burned in the oven for two days under the more than 1000C temperature . It is much different from natural stone from all sides. 1. Natural and soft texture, 2. Varied colors such white, beige, carrara white 3. Good weather resisting property and durability 4. Zero percent of water absorption , not be polluted easily 5. Green environmental building material 6. High-intensity, light weight 7. Bending formation, economical, time saving 8. scratch resistant ,withstand high-heat . More details about it : 1. There are more than 10 colors of crystallized glass panel products available: Pure white, yellow, silver yellow, silver grey, grey in white, grey spot white, USA grey spot white, yellow in white…. 2. Panel thickness: 10-30MM 3. Normal specifications (mm): 1800*3000*18 1200*2400*18 600*600*18 1200*1200*18 1600*2400*18 1800*3000*30 800*800*18 1000*1000*18 Thin tiles: 305*305*12mm, 450*450*12mm 457*457*12mm, 400*400*12mm 600*600*12mm 1200*2400*12mm 4. Material: crystal quartz sand 5. Packaging: Fumigated wooden crates, Bundles,foam 6. Brand name: China Marmoglass / Nanoglass 7. Place of origin: Xiamen, Fujian ,China 8. Model NO.: GS001, SN002, NANO2009, NNAO2011 9. Supply ability: 20000M2/MONTH, 30TON/DAY 10. Delivery time: generally within 10 days, after the order confirmed and the deposit received 11. Arc panel specifications (mm): Thickness: 18-30mm Diameter : 30cm-120cm 1.What is crystallized glass stone(Marmoglass SN002 )? The micro crystal stone is an innovative product designed as a substitute for the rare natural white marble. It is superior to the natural white marble in terms of characteristics, where the micro crystal stone possesses extreme density making it anti-breakage, giving it zero water absorption qualities, and making it resistant to acidic and alkaline substances. at the pace that mankind is consuming the natural resources in today’s world, the micro crystal stone is the ultimate solution, the superior alternative for the external and internal applications. It is certainly a revolutionary product and the finest construction material of the 21st century. 2.Why choose crystallized glass stone(Marmoglass SN002)? The micro-crystal stone, also known as the micro-crystal glass, Marmoglass, is a new type of high-level decoration material. It is derived from natural inorganic material through a high temperature process, and it possesses excellent characteristics including the followings: 1. High Performance The micro-crystal stone has even texture and high density, which makes it crush resistant, anti-bending and high resistant resulting its performance being higher than natural stone. It can be used for long period with minimal damage. 2. Acid-proof alkalinity and anti-corrosion Not only does the micro-crystal stone posses special micro-crystal characteristics, it also has special glass features such as a fine texture, shiny surface and light reflection effect. 3. Fine Texture We have the flexibility to manufacture any colors as per customer requirements while also making up the defect of color differences, which exists in natural stone. While the product is widely used for interior and interior decoration of star-level hotels, subways, local landmark buildings, airports, and office building etc, it is more suitable for high-level home decoration. 4. Pollution-resistance and easy maintenance The micro-crystal is a kind of inorganic crystalline material with stable chemical characteristics. Its acid proof alkalinity and anti-corrosion nature are superior to nature stone, specifically its anti-weather characteristics whereby it is unaffected by the wind or sunlight. 5.A wide application range The water absorption rare of micro-crystal is quite low, close to zero. Several types of dirty pulps and dyed solution have difficulty in penetrating it. Any dirt on the surface is easily cleaned and it is convenient to mankind. 6. Heat-bend reformation With the heating method, the micro-crystal can be made into various arched profiles and arched slabs. the process is simple and it allows us to save time, cost, material and resources. 7. No radioactive elements In the process of manufacturing the micro-crystal stone, we have integrated the elimination of all the harmful radioactive elements that are found in natural stone from its components. It is therefore the safest and most environmentally friendly building material in our modern world. Crystallized glass can be processed into slab, tile, countertop, column and vanity top, wash basin and etc. It is applicable for flooring, interior and exterior wall cladding, stairs and table. Contributed to the character of no color difference, so it is widely used for top grade hotel, business building shopping mall and such great construction. Physical Parameter Density 2.70 g/cm Water Absorption 0.01% Compressive Strength 126 Mpa Radioactive Class A (Suitable for indoor and outdoor) Size Slabs 2400/2600/2800/3000 x 1800/1600/1400/1500mm Cut-to-size Tiles 30 / 40 / 50 / 60 / 80 / 100cm X 30 /40/50 /60/80 /100cm 12"x12", 24"X12", 24"x24" or customized size Thickness 1.2cm,1.8cm (3/4'), 2.0cm, 2.5cm, 3.0cm, Finishing Polished, honed Usage Flooring, Walls, Stairs / Steps, Counter tops, Vanity, Paving / Curbstone, Pillar, Column, Border, Skirting, Window Sills Quality Control Thickness Tolerance +- 1mm; Polishing Grade above 100 degree Crack / Spot EU / US Standard: zero QC Standard AQL2.5/4.0 ITS Certificate CE, ISO, GB/T19001-2008 Advantage 1. Own factory with stable supply; 2. Factory direct with good price and prompt delivery; 3. Good Management System for good quality; 4. Value-added service. large glass white artificial stone of Packing Inner Packing Cover with foam and plastic film, corner paper board protection Individual Carton Individual carton packing with trademark is available upon request Outer Packing Plastic tapes in 6 sides, further strengthened with iron sheet in the corner Shipping Mark OEM Port of Loading Xiamen Port of China Delivery Lead Time Normally 10-15 days for one 20’ GP, faster delivery is available upon confirmation Trade Term FOB, CFR, CIF, etc. Loading Info. Thickness Qty per pallet Pallets per 20ft container QTY per 20ft container Square Meter per 20ft container Weight per 20ft container Big slab size 3000*1200mm 12mm 25pcs 7 175pcs 600-900 m2 21000kgs 3000*1400mm 15mm 20pcs 7 175pcs 500-700 m2 21000kgs 3000*1600mm 20mm 15pcs 7 105pcs 350-500 m2 21000kgs 3200*1600mm 30mm 10pcs 7 70pcs 250-358 m2 21000kgs Installation Recommendations Wall Cladding 1.Wall should be leveled and cleaned, 2.Fix the panel on the wall with wire and expansion screw tightly, 3.Fill the space between the panel and the wall with cement mortar of ratio 1:3, 4.Clean the extra mortar and dirt on the surface. Floor Installation 1.Mark out the baseline of gound level, 2.Mix the mortar with ratio of 1 cement to 4 sand to have semi-day mortar, 3.Lay the mixed mortar in level with a layer of 3-4cm thickness,place the tile over the mortar and adjust the height properly to be leveled, 4.Remove the tile after level adjustment.Put a thin layer of cement powder on the mortar and add water on it to become wet, 5.Put the tile on top and gently knock with rubber hammer until it sealed with the mortar properly. Make sure the tile is leveled and has the same space between each other. Those tiles which are not leveled with others should be removed and repeat the leveling procedure in step 4.Genetally,the space between two tiles should be 2mm for water evaporation and normal expansion. Daily maintenance of Micro Crystal Stone 1.The laying area of micro crystal stone can only be opened for use or stacking any item on top after at least 24 hours of filling the gap, 2.The ground must be covered with plywood or carpet for protection in case of doing other decoration work after the installation of micro crystal stone floor, 3.In areas like exit and entrance, the surface of micro crystal stone floor should be covered by carpet or plywood to protect it from the damage of abrasion of sand or other hard material. 4.Do not use general floor wax on micro crystal stone,General floor wax is an oil-based wax which is easily stuck to dust. 5.Please use rubber wheels for shopping cart and trolley on micro crystal stone floor, for the hard wheel may scratch and damage the surface, 6.Regular care and maintenance is the key for long lasting of micro crystal stone’s high glossy and reflection. Important Notice 1.Make sure the ground of laying area is dry and clean before laying mortar. The ratio 1:3(volume ratio) must be strictly followed and no extra water added during the installation progress 2.In the choice of using white cement as the filling material, the strength and quality of the cement must be checked properly. 3.It is not recommended to store micro crystal stone outdoor for long time. It should be covered with rock wool in winter and moved into indoor 2 hours in advance before installation. It also needs to be covered with waterproof cloth when installing during the rainy days outdoor, 4.When using micro crystal stone as ground floor,2mm wild gap must be left between the joints for the benefit of the water vaporization and physical expansion. In the case of large-scale installation, it is recommended to leave an 8mm expansion joint, 5.It is recommended that the area of micro crystal stone to remain-not used-for at least 24 hours and kept 2-3 days before passing or storing items on top. Marmoglass Polished Edge, Shining ! China Marmoglass SN002 Slabs Packing and Ready for ship We not only make Slabs, we also can make: - Project Tiles - Countertop - Tabletop - Vanitytop - Column Tags: Marmoglass, Crystallized glass panel, nano crystallized glass panel, pore marmoglass, pore crystallized glass panel, Artificial Stone, Hole-Free Micro Crystal Stone, Pure white stone, Crystallized glass tile, Crystal glass tile, pure white artificial white marble, Marmo Glass, Glass Marble, White Marble, Marmoglass, nano marmoglass, no pore marmoglass, non-pore crystallized glass panel, glass marble, white marble, crystal white marble, white stone, white marble tile, Micro-crystal stone, Crystallized glass, Crystallized White Stone, Crystallized White Stone, Micro-crystallized composite tile, Hole-Free Micro Crystal Stone, Micro-crystallized composite tile, White Marble Tiles, pure white marble China Marmoglass SN002 Strong Packing Crates China Marmoglass SN002 and Nanoglass NANO3 Container Loading Welcome to our product page of China Marmoglass, in which you can find detailed information of Marmoglass. China Marmoglass Co.,Limited offer Crystallized White Marmoglass is good in quality and competitive in price. China Marmoglass Co.,Limited is the manufacturer and supplier of Marmoglass,White Crystallized Glass Panel,Nanoglass. Crystallized Glass Stone,Crystallized Glass Panel,Crystallized Glass Stone Tile,Crystallized Glass Stone Countertop,Marmoglass also known as Nanoglass and White Crystallized Glass,Marmoglass, Crystallized Glasss is the popular materials for interior and exterior applications, including kitchen countertops, bathroom vanities, commercial foyer wall claddings, etc. China Marmoglass Co.,Limited is the Manufacturer and export Crystallized Glass and Crystallized Glass products. Crystallized Glass can be used Interior & external wall cladding, Flooring Tile, Stair, Column cladding, Basin, Countertop, Table, Bar, bath, Kitchen, any tops, round pillar and furniture decoration etc. Super White Nanoglass Slab, You Can Buy Various High Quality Super White Nanoglass Slab Products from Super White Nanoglass Slab Suppliers and Super White Nanoglass Slab Manufacturers at Chinamarmoglass.com

There are 97 leaf tile tiles in 1 m2. The product size is 9cmx15 cmx 1cm. The back side is matt-based and serrated, the front side is glazed and glossy polished. Leaf Çini ceramic tile features are a dimension that expresses the structure as a multi-colored color with the tile tiles decorations. - Material made of ceramic material. Tiles are converted into water and cleaning materials. - Decorating the leaf tile tile for many years. Color and pattern do not exist. - Water and moisture clean thanks to the glossy glazed polished. - It does not form mold. - In places where Leaf Tile tiles are used, we breathe cool and warm in summer. - Figure the days of sound waves taking advantage of the reflective feature of the days in the regions caused by Leafy Tiles. - Kütahya tiles are against the sun, wind and exterior. - Leaf Tiles and easy to use. - Kütahya and Iznik patterned shaped tile tile models and prices are the most suitable examples. It is used between countertops in kitchens. Ceramic-based hexagons are suitable for use as wall tiles in bathrooms. Production is made in pools, flooring, pool interior flooring, design design and design. For floor tiles, it can be designed to be comprehensive in detail to floor tiles. Leaf Tile Tile Application First of all, the area to be applied should be flat, if not, it should be corrected. Thin plaster should be applied to the area. Cement-based adhesive mortar should be used as adhesive mortar. The adhesive mortar is applied to the surface to be applied regularly and evenly with a fine notched trowel. Kütahya and İznik patterned tile tiles are placed on the surface to be laid. For non-slip and a flat application, you can press on it using a spirit level or wedge. It is an important issue that the Kütahya and Iznik tiles with Ottoman and Seljuk motifs complement each other. After bonding the tile tiles to the surface, the grouting is ready for application. Normally, tiles are laid without joints. After the grouting material is prepared in accordance with the instructions, it is applied on the tile tiles. We recommend that you prefer antibacterial grouts, especially for patterned tile ceramic tiles that you will apply in your kitchens and bathrooms. After the joint application, the excess joints remaining on the tiles whose flooring has been completed are removed by wiping them with a wet sponge. Please note that international buyers are responsible for any duties/customs charges and import taxes associated with shipping to their respective countries. These fees are calculated and imposed by your country when the item arrives in the country.

All doors windows have Solid Heart Matai frames and Architrave. We sourced and Milled this offsite, kiln dried and machined to suit. Quite hard to get long lengths in Matai, due to Govt restrictions in Logging Native. Older matai trees are found in most central North Island podocarp forests, lying under the undergrowth of the forest floor. Sap wood was well eaten by Huhu Grubs, leaving the fine grain Heart wood. Durability of Matai : The in-ground durability (though once thought to be as good as totara) is only 5-10 years, and is not suitable for posts and piles. It is suitable for exterior purposes such as sills and doors, with an equivalent Hazard class of H3.1

Quarried in Italy, this premium travertine is suitable for designing residential and commercial spaces. It features linear swirling veins in grey, beige, and white hues, making it a unique choice for sophisticated spaces. Moreover, its incredible resilience against external impacts makes this stone suitable for both indoor and outdoor spaces.

- VERTEX TABLE. Dining table with triangular planes which join dynamically together to create comfortable forms suitable for dining or meeting rooms, banquet or lecture halls and other casual needs. Vertex looks as if it was chiseled from a single block of material. The Vertex collection was created to integrate a more conceptual architectural piece into our space, to give it a more sophisticated touch. Made of polyethylene resin by rotational moulding, this product is 100% recyclable and its suitable for indoor and outdoor use. Available in different finishes. Dimensions: 70"7/8W x 37"D x 28"3/8H. https://cassoni.com/Vertex_table - VERTEX CHAIR. Dimensions: 20"7/8W x 20"7/8D x 33"7/8H. https://cassoni.com/Vertex_chair

Home > Products Crystallized Glass,Crystallized stone 6 Crystallized Glass,Crystallized stone,Crystallized glass panel Marmoglass,Nanoglass,Marmoglass Composite Collectively referred to as Crystallized Glass Crystallized Glass Application: 1). Interior & external wall cladding 2). Flooring Tile, Stair, Column cladding 3). Basin, Countertop, Table, Bar 4). bath, Kitchen, any tops, round pillar and furniture decoration etc . Crystal white is a kind of artificial stone . It is made of glass ,which should be burned in the oven for two days under the more than 1000C temperature . It is much different from natural stone from all sides. 1. Natural and soft texture, 2. Varied colors such white, beige, carrara white 3. Good weather resisting property and durability 4. Zero percent of water absorption , not be polluted easily 5. Green environmental building material 6. High-intensity, light weight 7. Bending formation, economical, time saving 8. scratch resistant ,withstand high-heat . More details about it : 1. There are more than 10 colors of crystallized glass panel products available: Pure white, yellow, silver yellow, silver grey, grey in white, grey spot white, USA grey spot white, yellow in white…. 2. Panel thickness: 10-30MM 3. Normal specifications (mm): 1800*3000*18 1200*2400*18 600*600*18 1200*1200*18 1600*2400*18 1800*3000*30 800*800*18 1000*1000*18 Thin tiles: 305*305*12mm, 450*450*12mm 457*457*12mm, 400*400*12mm 600*600*12mm 1200*2400*12mm 4. Material: crystal quartz sand 5. Packaging: Fumigated wooden crates, Bundles,foam 6. Brand name: China Marmoglass / Nanoglass 7. Place of origin: Xiamen, Fujian ,China 8. Model NO.: GS001, SN002, NANO2009, NNAO2011 9. Supply ability: 20000M2/MONTH, 30TON/DAY 10. Delivery time: generally within 10 days, after the order confirmed and the deposit received 11. Arc panel specifications (mm): Thickness: 18-30mm Diameter : 30cm-120cm 1.What is crystallized glass stone(Marmoglass SN002 )? The micro crystal stone is an innovative product designed as a substitute for the rare natural white marble. It is superior to the natural white marble in terms of characteristics, where the micro crystal stone possesses extreme density making it anti-breakage, giving it zero water absorption qualities, and making it resistant to acidic and alkaline substances. at the pace that mankind is consuming the natural resources in today’s world, the micro crystal stone is the ultimate solution, the superior alternative for the external and internal applications. It is certainly a revolutionary product and the finest construction material of the 21st century. 2.Why choose crystallized glass stone(Marmoglass SN002)? The micro-crystal stone, also known as the micro-crystal glass, Marmoglass, is a new type of high-level decoration material. It is derived from natural inorganic material through a high temperature process, and it possesses excellent characteristics including the followings: 1. High Performance The micro-crystal stone has even texture and high density, which makes it crush resistant, anti-bending and high resistant resulting its performance being higher than natural stone. It can be used for long period with minimal damage. 2. Acid-proof alkalinity and anti-corrosion Not only does the micro-crystal stone posses special micro-crystal characteristics, it also has special glass features such as a fine texture, shiny surface and light reflection effect. 3. Fine Texture We have the flexibility to manufacture any colors as per customer requirements while also making up the defect of color differences, which exists in natural stone. While the product is widely used for interior and interior decoration of star-level hotels, subways, local landmark buildings, airports, and office building etc, it is more suitable for high-level home decoration. 4. Pollution-resistance and easy maintenance The micro-crystal is a kind of inorganic crystalline material with stable chemical characteristics. Its acid proof alkalinity and anti-corrosion nature are superior to nature stone, specifically its anti-weather characteristics whereby it is unaffected by the wind or sunlight. 5.A wide application range The water absorption rare of micro-crystal is quite low, close to zero. Several types of dirty pulps and dyed solution have difficulty in penetrating it. Any dirt on the surface is easily cleaned and it is convenient to mankind. 6. Heat-bend reformation With the heating method, the micro-crystal can be made into various arched profiles and arched slabs. the process is simple and it allows us to save time, cost, material and resources. 7. No radioactive elements In the process of manufacturing the micro-crystal stone, we have integrated the elimination of all the harmful radioactive elements that are found in natural stone from its components. It is therefore the safest and most environmentally friendly building material in our modern world. Crystallized glass can be processed into slab, tile, countertop, column and vanity top, wash basin and etc. It is applicable for flooring, interior and exterior wall cladding, stairs and table. Contributed to the character of no color difference, so it is widely used for top grade hotel, business building shopping mall and such great construction. Physical Parameter Density 2.70 g/cm Water Absorption 0.01% Compressive Strength 126 Mpa Radioactive Class A (Suitable for indoor and outdoor) Size Slabs 2400/2600/2800/3000 x 1800/1600/1400/1500mm Cut-to-size Tiles 30 / 40 / 50 / 60 / 80 / 100cm X 30 /40/50 /60/80 /100cm 12"x12", 24"X12", 24"x24" or customized size Thickness 1.2cm,1.8cm (3/4'), 2.0cm, 2.5cm, 3.0cm, Finishing Polished, honed Usage Flooring, Walls, Stairs / Steps, Counter tops, Vanity, Paving / Curbstone, Pillar, Column, Border, Skirting, Window Sills Quality Control Thickness Tolerance +- 1mm; Polishing Grade above 100 degree Crack / Spot EU / US Standard: zero QC Standard AQL2.5/4.0 ITS Certificate CE, ISO, GB/T19001-2008 Advantage 1. Own factory with stable supply; 2. Factory direct with good price and prompt delivery; 3. Good Management System for good quality; 4. Value-added service. large glass white artificial stone of Packing Inner Packing Cover with foam and plastic film, corner paper board protection Individual Carton Individual carton packing with trademark is available upon request Outer Packing Plastic tapes in 6 sides, further strengthened with iron sheet in the corner Shipping Mark OEM Port of Loading Xiamen Port of China Delivery Lead Time Normally 10-15 days for one 20’ GP, faster delivery is available upon confirmation Trade Term FOB, CFR, CIF, etc. Loading Info. Thickness Qty per pallet Pallets per 20ft container QTY per 20ft container Square Meter per 20ft container Weight per 20ft container Big slab size 3000*1200mm 12mm 25pcs 7 175pcs 600-900 m2 21000kgs 3000*1400mm 15mm 20pcs 7 175pcs 500-700 m2 21000kgs 3000*1600mm 20mm 15pcs 7 105pcs 350-500 m2 21000kgs 3200*1600mm 30mm 10pcs 7 70pcs 250-358 m2 21000kgs Installation Recommendations Wall Cladding 1.Wall should be leveled and cleaned, 2.Fix the panel on the wall with wire and expansion screw tightly, 3.Fill the space between the panel and the wall with cement mortar of ratio 1:3, 4.Clean the extra mortar and dirt on the surface. Floor Installation 1.Mark out the baseline of gound level, 2.Mix the mortar with ratio of 1 cement to 4 sand to have semi-day mortar, 3.Lay the mixed mortar in level with a layer of 3-4cm thickness,place the tile over the mortar and adjust the height properly to be leveled, 4.Remove the tile after level adjustment.Put a thin layer of cement powder on the mortar and add water on it to become wet, 5.Put the tile on top and gently knock with rubber hammer until it sealed with the mortar properly. Make sure the tile is leveled and has the same space between each other. Those tiles which are not leveled with others should be removed and repeat the leveling procedure in step 4.Genetally,the space between two tiles should be 2mm for water evaporation and normal expansion. Daily maintenance of Micro Crystal Stone 1.The laying area of micro crystal stone can only be opened for use or stacking any item on top after at least 24 hours of filling the gap, 2.The ground must be covered with plywood or carpet for protection in case of doing other decoration work after the installation of micro crystal stone floor, 3.In areas like exit and entrance, the surface of micro crystal stone floor should be covered by carpet or plywood to protect it from the damage of abrasion of sand or other hard material. 4.Do not use general floor wax on micro crystal stone,General floor wax is an oil-based wax which is easily stuck to dust. 5.Please use rubber wheels for shopping cart and trolley on micro crystal stone floor, for the hard wheel may scratch and damage the surface, 6.Regular care and maintenance is the key for long lasting of micro crystal stone’s high glossy and reflection. Important Notice 1.Make sure the ground of laying area is dry and clean before laying mortar. The ratio 1:3(volume ratio) must be strictly followed and no extra water added during the installation progress 2.In the choice of using white cement as the filling material, the strength and quality of the cement must be checked properly. 3.It is not recommended to store micro crystal stone outdoor for long time. It should be covered with rock wool in winter and moved into indoor 2 hours in advance before installation. It also needs to be covered with waterproof cloth when installing during the rainy days outdoor, 4.When using micro crystal stone as ground floor,2mm wild gap must be left between the joints for the benefit of the water vaporization and physical expansion. In the case of large-scale installation, it is recommended to leave an 8mm expansion joint, 5.It is recommended that the area of micro crystal stone to remain-not used-for at least 24 hours and kept 2-3 days before passing or storing items on top. Marmoglass Polished Edge, Shining ! China Marmoglass SN002 Slabs Packing and Ready for ship We not only make Slabs, we also can make: - Project Tiles - Countertop - Tabletop - Vanitytop - Column Tags: Marmoglass, Crystallized glass panel, nano crystallized glass panel, pore marmoglass, pore crystallized glass panel, Artificial Stone, Hole-Free Micro Crystal Stone, Pure white stone, Crystallized glass tile, Crystal glass tile, pure white artificial white marble, Marmo Glass, Glass Marble, White Marble, Marmoglass, nano marmoglass, no pore marmoglass, non-pore crystallized glass panel, glass marble, white marble, crystal white marble, white stone, white marble tile, Micro-crystal stone, Crystallized glass, Crystallized White Stone, Crystallized White Stone, Micro-crystallized composite tile, Hole-Free Micro Crystal Stone, Micro-crystallized composite tile, White Marble Tiles, pure white marble China Marmoglass SN002 Strong Packing Crates China Marmoglass SN002 and Nanoglass NANO3 Container Loading Welcome to our product page of China Marmoglass, in which you can find detailed information of Marmoglass. China Marmoglass Co.,Limited offer Crystallized White Marmoglass is good in quality and competitive in price. China Marmoglass Co.,Limited is the manufacturer and supplier of Marmoglass,White Crystallized Glass Panel,Nanoglass. Crystallized Glass Stone,Crystallized Glass Panel,Crystallized Glass Stone Tile,Crystallized Glass Stone Countertop,Marmoglass also known as Nanoglass and White Crystallized Glass,Marmoglass, Crystallized Glasss is the popular materials for interior and exterior applications, including kitchen countertops, bathroom vanities, commercial foyer wall claddings, etc. China Marmoglass Co.,Limited is the Manufacturer and export Crystallized Glass and Crystallized Glass products. Crystallized Glass can be used Interior & external wall cladding, Flooring Tile, Stair, Column cladding, Basin, Countertop, Table, Bar, bath, Kitchen, any tops, round pillar and furniture decoration etc. Super White Nanoglass Slab, You Can Buy Various High Quality Super White Nanoglass Slab Products from Super White Nanoglass Slab Suppliers and Super White Nanoglass Slab Manufacturers at Chinamarmoglass.com

- LUCKY CHAIR. Lucky Chair 906 is a funny and universal chair, usable for cafeterias and wine bars, suitable for waiting or meeting rooms and, of course, perfect at home. The shape comes from a particular mould which creates an extremely comfortable shell. This model is available in many bright colours for the shells and with different kind of bases in wood, steel and lacquered die cast aluminium. Lucky has been created in the soft, slightly flexible and innovative material ''soft touch'' a polyurethane integral foam. Available Options: 906.01 Chair with metal legs, 906.21 Chair with wooden legs, 906.11 Chair with wooden legs, 906.81 Swivel Base in die casting aluminium. 20''7/8W x 21''5/8D x 34''1/4H. Seat height: 18''1/2. http://ow.ly/3zjqH7 - MAC’S TABLE. Mac's Table 216 Legs Base in Soft touch polyurethane. A table system with unlimited possibilities. The key of its success is the innovative material soft-touch used for the base element. With the same element is possible to create innumerable combinations. In this way there is no limit to the table length. The single element is available in 12 different colours allowing you to create many combinations. You can decide how your table will look like: monochromatic or coloured like a rainbow. A steel junction component links together all the base elements. Set free you fantasy and create your own table system. The table system is available also on bespoken dimensions with quotation and lead time on demand. 35''3/8W x 35''3/8D x 29''1/8H. Ø 43''1/4 x 29''1/8H. Ø 51''1/8 x 29''1/8H. Ø 59'' x 29''1/8H. Ø 63'' x 29''1/8H. http://ow.ly/3zjqFm - LUCKY BAR STOOL. Lucky Stool 906.51 is a funny and universal chair, usable for cafeterias and wine bars, suitable for waiting or meeting rooms and, of course, perfect at home.The shape comes from a particular mould which creates an extremely comfortable shell. This model is available in many bright colours for the shells and with different kind of bases in wood, steel and lacquered die cast aluminium. Lucky has been created in the soft, slightly flexible and innovative material ''soft touch'' a polyurethane integral foam. 906.51 Barstool with adjustable central column. 21''5/8W x 21''5/8D x 38''5/8 - 48''3/8H. Seat height: 22''7/8 - 33''. http://ow.ly/3zjsd9