Don gloves and eye protection, and clean the floor with a steam vapor cleaner. Work your way across the surface, one 4-foot-square area at a time. Wipe the area with a clean cloth before proceeding to the next square.
2
Apply a generous layer of alkaline stone and tile cleaner with a wax applicator or sponge wrapped in a clean rag. Work from one corner of the room out until the entire surface is covered. Allow the cleaner to sit on the tile for 10 to 15 minutes or as long as directed on the package instructions to lift the impregnator pigment.
3
Wipe up the wet cleaner and pigment beginning from the first corner, changing rags frequently. Unless you know that the impregnator you’re lifting and cleaner you’re using are water-based, rinse cloths in mineral spirits; San Franciscans can dispose of materials at SF Recycling and Disposal’s hazardous waste facility.
4
Rinse the floor thoroughly with water as hot as your gloved hands can tolerate and wipe the floor dry. Alternatively, clean the tile with the steam vapor cleaner a second time and wipe the floor.
Sponsored Links

i think brandi misread the dilemma.

Can't you ask the stone installer?..what do they recommend ?maybe it might require a professional to do this...

After cleaning buffing maybe needed if any damage has occurred

The post references a floor but it is a tutorial I found online to remove the grit ...pretty certain the person with the dilemma can substitute floor for counter- tile - etc...this is what the manufacture recommended

wow I was literally about to apply 511 on my white quartz. After reading this I will not do it. Not sure if Quartz needs sealer or not. My is getting coffee and wine stains. We drop a blue pen marker on the countertop and now it is blue. I tried that special eraser sponge but no luck.

were you recommended to apply sealer? this is something that will void the warranty of your quartz, so i would contact your installer if they suggested it.

Did you get the 511 removed? Did it ruin your quartz?

Applying the sealer to the quartz countertop may have voided the warranty, but it will certainly help you resist stains. Try using ultra fine steel wool and not a chemical. As for the warranty, most would be surprised at what is actually "NOT" covered. The warranty does not protect against; staining, fading, cracking, chipping or scratching... As for removing the texture on the surface try using the steel wool and then follow with Supreme Surface Granite, Quartz and Marble Treatment with ioSeal. It will make the colors more vibrant and the surface smoother.

I have a fairly new quartz countertop and just had it re-sealed by the company that made it. It traditionally does come with a sealer on it if it’s been honed and sealed. Yet the grit keeps coming through even though it’s had four coats of sealer so I’m not sure what to do either. I do know that you should not put anything rough to the surface- you will ruin it. Don’t use Brillo or steel wool to clean it.
The guy who came to reseal it suggested to lemon pledge the top as often as I’d like because the oil would fill in the pores because the oil in the lemon pledge is the same as the oil in the sealer. And quartz countertops tend to have a rough finish so it’s never going to be smooth. Yet if you have a grit coming out of it and you can see it on your hand after you wipe your hand across it then you have the same problem as me and I would appreciate knowing anything to get rid of this grit.
As for staining, everything natural is going to stain over time and you just need to stop being anal about it and just enjoy it. A website called satinstone.com has a number of cleaning tips for quartz counter tops.

How did you go with this? we can help you with some advise

Email: stains@stonebenchtopcleaner.com.au
Web: www.stonebenchtopcleaner.com.au
Instagram: Quartz Marble Granite Cleaner
Youtube: Subscribe for Hints & Tips

YOU DO NOT SEAL QUARTZ ITS THE WHOLE POINT OF THE MATERIAL

I think some of you are confusing Quartz with Quartzite. Quartzite has to be sealed, as it is a natural stone. Quartz does not.

Hi all,

Supreme Surface, Inc. you seem to have a thorough understanding of quartz. We just had our quartz counters installed and they are honed by the supplier. They are suggesting that we seal them. I would like to seal them to prevent staining if at all possible but would like to keep the matte/honed look and feel. Is there a product out there that can seal a matte finish? Any advise would be greatly appreciated.

Thanks!

We just had Porcelain Tile professionally installed in our bathrooms. Subcontractor wiped grout sealer onto my tiles. How can I safely remove the dried sealer from my tiles, If I do it, will it void the Warrenty.

This thread is full of bad advise. Acetone on a clean white rag. Section at a time; careful it's flammable.

Had a similar problem when I used the 511 impregnator on my new quartzite counter. Contrary to everything I’ve read here, I decided that I had put the impregnator on too thin and allowed it to dry too much before removing excess. So, I started in smaller sections, actually pouring small amounts on the quartzite, and used a sponge

to spread it on the surface, and the wiped excess off three minutes later. The countertop looks good, it is thoroughly sealed, and there is Very very little of that grainy feel, probably 5% compared to what I felt after the first thin application.