Software
Houzz Logo Print
dudleyfuddpucker

Fisher Paykel DEIX2 dryer Fault Code 7

7 years ago
last modified: 7 years ago

After 13 years of excellent and very reliable service, it seems my F&P Intuitive set is slowly falling apart.

Two months ago the dryer bearings disintegrated (what a screeching noise!) It cost me roughly $350 to fix that. Last week the lid lock switch plastics fell apart and the agitator fins ripped. Was able to fix both myself for $80, so no biggie there.


Today my DEIX2 dryer, upon pushing the Start button, locks the lid and the motor makes the usual humming sound, but the drum never starts rotating and after a few seconds it throws a Fault Code 7. From what I can gather this is either the motor control module (excessive motor current?), but. I haven't found these online yet, so not sure what to expect cost-wise for replacement.


Any experience with this one? I am beginning to wonder if this is the start of the slippery downward slope.

Comments (9)

  • 7 years ago

    $350 for a drum bearing? Last one I bought in Aug 2018 was $67 from Sears to refurb a used machine I found. Listed now $132 (crazy!), direct from F&P is $120.

    Regards to Fault 7, does the drum turn normally/easily by hand or is it in a bind?

    I've seen used motors at reasonable prices on eBay. Bought one as a spare last year. Assume it works but haven't tried it, the seller had cut the wires at the board connector plug (not shown in the pics) so I'd have to splice it in for a test.

    Broken agitator fins are fairly common but I've not had that happen to any of my 3 active machines (circa 1999 that nephew is using, my 2004, or the 2005 that I refurbed last year for my mother). A 4th washer that I bought used (with a matching TL dryer, I have three dryers now) does have all three fins broken but it's in *very* rough shape ... the display board came loose from the console mount, dropped down, the previous owners punched a hole through the button overly to poke the power button with a screwdriver or stick or whatever. Maybe they were washing rocks. I also have an AquaSmart washer that I bought used, refurbed and am using. So that makes five F&P washers (four in use, one wrecked) and three TL dryers (two in use, one needs clean-up).

  • 7 years ago
    last modified: 7 years ago

    I may have rounded up a bit, but it was definitely over $300. That includes installation and labor, but being out of the country on business for 3 weeks I was not expecting my wife and kids to forego clean laundry until I got back.


    The washer I was home and those items easy to fix. A new agitator $77 shipped from online and about two minutes to swap. The lid lock was just the plastic parts disintegrating; the solenoid was still working fine, so I just disconnected the solenoid from the plastic latch and fastened it under the lid off to one side. The solenoid still fires in and out but it's not doing anything, the washer thinks it's still locking the lid, problem solved.


    For the latest, the drum does turn freely and quite easily, which is why I suspect the motor control or motor. If it requires a major motor installation I may be too time challenged to do that much, so (depending on cost for the appliance guy to do it) might be replacing the set. My wife set a limit of $500; otherwise it's time for another.


    P.S. The Houzz editor SUCKS. I auto-correct a typo'd word and instead it duplicates an entire paragraph, overwriting one that was already there.

  • 7 years ago

    Turns out the display board is having issues. Have one on order (another $300+), but if this continues I may have to say goodbye to my beloved F&P set. Controller boards and the like are no longer made for these models, so the price is going up and up...

  • 7 years ago

    Used on eBay .... I've bought entire consoles (including the display board but not a motor board) for very reasonable prices, to change a GWL11 to an IWL12, and an LED/pushbutton Aquasmart/AeroSmart pair to the upper-end LCD/touchpanel versions.

  • 7 years ago
    last modified: 7 years ago

    Any TL dryer model can take any TL-model console/display board AFAIK ... although I don't know if there's a difference on display boards between gas and electric or if only the motor board is the difference. All mine are electric so I haven't compared the part numbers to gas models.

  • 7 years ago

    As always, thanks for the feedback and suggestions. Remember though that as a hobbyist you have a big advantage over me: I don't have any spare machines! One washer and one dryer, and that's it in my house. When one of them is "down" speed is of the essence because the laundry piles up quick with my family, and searching for spares on eBay is rarely fast enough.


    I still like the set enough that I'm going through with repairs, but with three needed in a few months I am starting to research the inevitable replacement set. Really liking the LG WM3900H machines, but they're so new I am hoping my F&Ps last long enough that the former can accumulate some use time with home consumers.

  • 7 years ago

    Hey dadoes, you want my set? Turns out the motor and motor controller are also dead. Yeah, I know, used parts available on eBay, but I don’t have the time or inclination to tinker with it, and with 5 failures in 2 months I’m marking it as the end of a good 13 years and have already purchased a replacement laundry pair.


    There are are things about the FP set I will unquestionably miss, but with so many threads on this forum about nothing lasting 10 years I definitely feel I got my money’s worth and have no regrets.

  • 7 years ago

    I would take the set (for parting-out if nothing else) if you are local or within a couple towns over ... but I don't imagine that's the case.

  • 7 years ago

    Yes, you are correct. If I recall you are in Texas? I am in northern Ohio, so depending on where in Texas you are it'd probably between 1,000 and 1,500 miles between us.


    With the dryer needing so much work I am scrapping it. While the washer still works perfectly it's a little worse for wear, so I doubt I'd find buyers for it. About the only thing I am going to try to sell is that damn agitator; I JUST bought it and had done less than 10 loads when the dryer croaked, so effectively new. eBay, here I come!