Software
Houzz Logo Print
jeanneff13

Does anyone have experience with Task under cabinet power outlets?

5 years ago

I'd like to avoid outlets dotting my kitchen backsplash -- in house to be built. But my contractor tells me that the electrician strongly advises against this, as they trip. So it's not a workable solution.

It's hard for me to believe that undercabinet outlet strips are universally unreliable. But wiring and power is not my area. Any expert advice or experience out there?

Comments (11)

  • 5 years ago

    The TASK outlets just look to be angled power strips. Nothing there that would be tripping all the time. Sometimes you're just working against the inertia of the trades people; the "we haven't done that before" or "we don't do it that way" mentality. Maybe show the contractor & electrician a picture of what you want so they can just see it's an angled outlet.

  • 5 years ago

    Why are these TASK outlets superior? A backsplash outlet might be hidden by a countertop appliance, all cords would hang down from a TASK outlet, and a backsplash outlet would be more easily reached when plugging in, say, a portable mixer.

  • 5 years ago

    Or, you can do this:


    You can barely see the outlets, and switches in these two pics.

  • 5 years ago
    last modified: 5 years ago

    We have them in our kitchen, no problem with them tripping. Regarding cords dangling I leave my Nespresso machine plugged in & the height of it hides almost all except right under the cabinet. My kitchen is very modern, so the clean look of no outlets on backsplash works for me. Everyone lives differently, I dont leave other appliances out full time.

    Jeanne Fenton thanked K Laurence
  • 5 years ago

    This is why i dont like them. standard outlets behind appliances look better and cleaner.




  • 5 years ago

    Lol, it takes me all of 2 seconds at most, to plug my Nespresso in. I like a clean uncluttered look, no toasters or mixers, etc. living full time on my counters.

    Jeanne Fenton thanked K Laurence
  • 5 years ago

    I agree with Dave. I put them into my new build, and I don't like how the appliance cords look 'going up' the backsplash.

  • 5 years ago

    We have had Task angled plugmold all over our kitchen for several years. No problems whatsoever. I would definitely use it again. We have two regular horizontal outlets in a small area where the Keurig lives as it stays plugged in so no dangling cord.

    Jeanne Fenton thanked wilson853
  • PRO
    5 years ago

    We use them ALL the time on our jobs...but mostly for island outlets tucked under the countertop overhang. We've never had them trip a lot.


    I did have one client complain at how hard they were to plug in. It's called Tamper resistance regulation and all outlets are like this. Makes it harder for a kid to stick a fork in it.


    I like the use of them along with lowering the outlets.

  • 5 years ago

    We have outlet strips that run the full length of all upper cabinets, integrated into the back side and flush with the board under the uppers. They are a dream!

    No outlets showing everywhere (long counter runs), and small appliances are only plugged in during use, so hiding the cord isn't a long-term issue…hiding the outlets would be.


    Our only outlet on the backsplash is for our hard-plumbed Kuerig, which stays plugged in all the time, and that one is always hidden by the appliance itself.