Software
Houzz Logo Print
rachel_lagiakos

Calling all electricians - wiring a 4-Function, 3-Switch Wall Control

6 years ago

Before you write go get an electrician - I HAVE! And he's never wired one before. AND asked ME to do some research!! Before you also say get a new one - though boy do I want one - it is a long story and not an option.


The switch is to control a bathroom vent fan with an inbuilt light, nightlight and heater - hence the 4 functions. Two switches are normal on-off for the fan and heater, whilst the third has a rocker position to accommodate the light, nightlight and off. Love this switch option which controls all the functions whilst only using 1 gang, so separating it into 4 different switches is something I won't consider (he suggested this option).


The wiring diagram shows three loads going into the junction box, but the electrician has 4 wires for each function coming out of the vent unit. Perhaps the two light functions need to be spliced inside the junction box before connecting to the switch? He doesn't seem to know how or where to integrate the 4th function.


Anyone have any insights? They would be MOST appreciated so I can get back to picking out my sconces :)


Fan: https://www.amazon.com/Broan-Nutone-9093WH-Exhaust-Bathroom-1500-Watts/dp/B001PO29TA/ref=pd_sbs_60_t_0/140-7652250-2779335?_encoding=UTF8&pd_rd_i=B001PO29TA&pd_rd_r=c8ccce8a-7fe9-46af-9271-6daa0eefe2b2&pd_rd_w=DY487&pd_rd_wg=jIsMb&pf_rd_p=5cfcfe89-300f-47d2-b1ad-a4e27203a02a&pf_rd_r=03X2D3K22GHVYNS127ZK&psc=1&refRID=03X2D3K22GHVYNS127ZK


Switch:

https://www.broan.com/Accessories/Bath-Ventilation-Accessories/List-of-All-Accessories/77DW


Installation guide:

broan.com/BroanPublicWebSite/media/BroanUS_Canada/Documents/installation_guides/77DV-77DW-Installation-Guide-99043742B.pdf?ext=.pdf










Comments (10)

  • PRO
    6 years ago

    Sorry get an electrician who knows what you are trying to do honestly the guy you had is not the one you need.

  • 6 years ago
    last modified: 6 years ago

    I think the red and blue wires on your switch are the switched power for the three position switch (on the bottom). I don't see which is which, so you may just have to hook up the light and night light and see what position turns them on/off and change the wires accordingly.



    Hook the power for the fan up to the green circled screw (for the top switch).

    Hook the power for the heater to the purple circled screw (for the middle switch).

    Your black wires are all connected together with the power source black.

    (Not really sure why your electrician couldn't figure this out. Is he actually an electrician or just a handy man that attempts to attach wire together and hopes for the best?)

    Rachel L thanked greg_2015
  • 6 years ago
    last modified: 6 years ago

    From the fan installation guide:



    There should be 4 power wires and a white and a ground coming from the unit.

    I'm not sure how that matches what you stated here (it sounds like there are 16 wires?!?):

    but the electrician has 4 wires for each function coming out of the vent unit


    This is what you should do:

    Black from the unit is for the nightlight (hook it up to the red wire on your switch).

    Yellow from the unit is for the light (hook it up to the blue wire on your switch).

    Red from the unit is for the heater (hook it up to the purple circled screw in my last post).

    Blue from the unit is for the fan (hook it up to the green circled screw in my last post).

    Rachel L thanked greg_2015
  • 6 years ago
    last modified: 6 years ago

    Go get a DIFFERENT electrician. One who knows how to trace wires! One who knows how to do his own research!

    It's your house that will burn down, not his.

  • 6 years ago

    I doubt that he'll burn down the house, but I also doubt that he'll be able to make it work right.

  • 6 years ago

    Yes my only comment is hire a new electrician. Its not about "we think" it goes like this and then you spend $$ because he takes failed attempts and burns up the switch and still charges you for the time lol

  • 6 years ago

    Thank you very much @greg_2015 and @DavidR for taking the time to write such a detailed response. I wholeheartedly appreciate it. Your instructions are so clear that even I could do it...but rest assured I won't. I will share this with my electrician and should then be the happy recipient of a functional switch!

  • 6 years ago

    I will share this with my electrician

    Fine, but I suggest that you edit out "If it's the former, the wiring for that would indeed be confusing to someone with (how do I say this kindly?) a rushed or inadequate education in basic electrical principles." before showing it to him. :\

  • 6 years ago

    😂 I was very cognisant of the bits that needed editing out and they weren't limited to your response!! But thank you David for trying to save me from an unpleasant moment (not like my interactions with him haven't been unpleasant enough already, it's best I not make it worse)!!