1. All Products
  2. Home Improvement
  3. Home Safety & Security
  4. Carbon Monoxide & Smoke Detectors

Carbon Monoxide and Smoke Detectors

First Alert SC9120LBL Hardwired Smoke and Carbon Monoxide Alarm
First Alert SC9120LBL Hardwired Smoke and Carbon Monoxide Alarmby BRK(3)
$42.99$67.05
BRK SC9120LBL Hardwired Combo Smoke & Carbon Monoxide Alarm with 10-Year Sealed Battery Backup The First Alert SC9120LBL hardwired combination smoke/CO alarm connects directly to your home electrical system. In the event of a power outage, the smoke/CO alarm is equipped with a 10 year lithium battery-backup. The battery drawer is shipped pre-locked so battery will not be discarded prematurely. The "Smart Technology" system is designed to reduce nuisance alarms. "Latching alarm indication" remembers which unit initiated an alarm. The "perfect mount" system features a gasketless base and a mounting bracket that keeps the alarm secure over a wide rotation range to allow for true alignment. Under normal conditions you should not have to replace the battery for the life of the alarm. The First Alert BRK Brands Hardwired Combo Smoke & Carbon Monoxide Alarm with 10-Year Sealed Battery is a performance rich solution that includes numerous safety enhancers to ensure the maximum in overall protection. Capable of sensing both smoke and carbon monoxide, this alarm features an Electrochemical Carbon Monoxide Sensor that allows for the most accurate detection of carbon monoxide when compared to other sensing technologies. First Alert BRK Brands Hardwired Combo Smoke & Carbon Monoxide Alarms feature a near effortless installation process and are easily maintained. The premier in functionality and affordability, this smoke and carbon monoxide alarm utilizes Intelligent Sensing Technology to drastically reduce the amount of nuisance alarms triggered. A single button test/silence function and Dust Cover have been included to increase overall convenience and additional peace of mind. A Perfect Mount has also been implemented. This addition effectively increases the number of installation options tenfold. All BRK First Alert Electronics smoke alarms meet UL 217 standard and are listed with the California State Fire Marshal. They use the new UL mandated repeating 85-decibel alarm horn pattern. 10-year limited warranty. For a full list of states and cities requiring 10 Year alarms click here.Read More
First Alert 3120B Photoelectric & Ionization Smoke Alarm w/Battery Backup, 120V
First Alert 3120B Photoelectric & Ionization Smoke Alarm w/Battery Backup, 120Vby First Alert
$45.88
This Hardwired Photoelectric and Ionization smoke alarm provides double protection for both flaming and smoldering fires. The 3120B smoke detector is a state-of-the-art hardwired alarm with a battery backup that features dual photoelectric and ionization smoke sensing technologies. This alarm includes two latching features. One alarm latch easily identifies an initiating alarm even after alarm condition has subsided. the second is a low battery latch that identifies which unit is in low battery condition by blinking the green power light. This alarm also has two silence features that includes a low battery silence that temporarily silences the low battery chirp for up to eight hours. Other features include an 85dB horn, single button test/silence, an easy access battery drawer and dust cover. Installation is quick, easy and cost effective. Connection to AC power is made with a Quick-Connect wiring harness. *120V *Hardwired photoelectric & ionization smoke alarm with battery back up *Double protection for both flaming & smoldering fires *Dual photoelectric & ionization smoke sensing technologies *Includes 2 latching features, 1 alarm latch easily identifies an initiating alarm even after alarm condition has subsided, second is a low battery latch that identifies which unit is in low battery condition by blinking the green power light *It has 2 silence features that includes a low battery silence that temporarily silences the low battery chirp for up to 8 hours *Includes an 85 Db horn, single button test/silence, an easy access battery drawer & dust cover *Installation is quick, easy & cost effective *Connection to AC power is made with a quick connect wiring harness Key Features: *Utilizes both ionization and photoelectric smoke sensors for maximum protection *Two Latching Features - Alarm Latch and Low Battery Latch *Two Silence Features - Alarm Silence and Low Battery Silence *Two AA Battery Backup *Optipath 360 Technology *Emits T3 Pattern.Read More
First Alert® SC7010BV Photoelectric Smoke & Carbon Monoxide Alarm, 120V AC/DC
First Alert® SC7010BV Photoelectric Smoke & Carbon Monoxide Alarm, 120V AC/DCby First Alert
$76.27
Featuring a swift and near effortless installation process, the First Alert Hardwired Talking Smoke and Carbon Monoxide Alarm comes equipped with Optipath 360 Technology that provides 360 degrees of direct access to the smoke sensor. Overall versatility is further increased with the implementation of an End of Life signal that will alert your surroundings of a low battery. This model complies with UL217 and UL 2034 standards and meets new construction requirements for the state of Massachusetts and other states/counties that have similar requirements. *120V AC/DC *Hardwire photoelectric smoke and carbon monoxide alarm with voice & location feature *Large opening in the mounting bracket for easy access to wiring *Key hole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation *A battery pull tab keeps the battery fresh until the home is occupied *Battery installation & removal can occur while the unit is mounted to the ceiling or wall via the side load battery compartment *2 locking features are provided to prevent battery theft &/or theft of the unit *Connection to ac power is made with a quick connect wiring harness *Installation is quick, easy & cost effective Key Features: *Electrochemical carbon monoxide sensor *Photoelectric smoke sensor *Optipath 360 technology *Exclusive programmable voice location technology *End of life signal *20-Volt AC with 2 AA battery back up *Single button test/silence *Spread spectrum horn tone *Perfect mount - allows for easy alignment of alarm *Easy installation/maintenance.Read More
GROHE Sense Guard Smart Water Controller
GROHE Sense Guard Smart Water Controllerby GROHE US
$561
The GROHE Sense Guard water control system continuously monitors water pressure in the pipes, detecting every anomaly from minor leaks to a major burst. Once a pipe burst is detected, the water supply is automatically shut off and an alert is sent to your smartphone. AqualQ self-learning algorithm learns your patterns of water consumption and alerts you if your water consumption is higher than usual, even detecting minor leaks and notifying you on your smartphone. GROHE Sense Guard also monitors changes in temperature and water pressure to help prevent frost damage. Grohe Sense Guard connects to your home WiFi network. In the case of a connectivity loss, GROHE Sense Guard continues to protect your home by shutting off water in the event a pipe burst occurs. Basic Requirements: · Single-family residential home use only · Must be installed on potable cold water line only with a maximum 1” pipe size · 110 V US plug type A standard electrical outlet needed · Wireless LAN is needed to connect to the ONDUS app Product Features: · Guard comes standard with 3/4” NPT male adapters. A 1” NPT male adapter mounting bracket is available but sold separately · For wireless LAN, mains powered, 110 V, US plug type A · Detects pipe breaks, micro leaks, frost and unusual water flow · Automatic, manual or remote shut off function to limit water damage · Detects leaks by measuring flow rate and water pressure · Valve normally open - without electricity the solenoid valve opens · Use ONDUS App for both iOS and Android for customized settings and remote control · Status indication via LED light, buzzer and app · For horizontal or vertical installation right after the water meter. Please follow the installation instructions carefully · Includes 70 7/8” power cable, plug type A · CE approved and meets the requirements of IAPMO IGC 349-2017 · Noise classification 1 in accordance with DIN4109 incl. certificate- Monitors water pressure in the pipes, detecting minor water leaks to a major pipe burst - Also detects Frost and unusual water flow - Sends an alert to your smartphone - Customize settings via GROHE Ondus app for iOS and Android - For horizontal or vertical Installation right after the water meter - Requirements: 2, 4 GHz Wi-Fi network | wpa/Wpa2 protection - If a mac-filter is activated, you must add the Mac address of the GROHE sense guard to the Mac List of the router - Includes: 1 x water controller with 1 (25mm) connection, mounting nuts 3/4 inch (19mm), extendable power cable 27 1/2 inch (0.7M) length, plug type A - CE approvedRead More