A custom double shower rod system made for Adam Sharkey for his Santa Barbara house. Designed to let the curtain and liners pull around three sides of the tub when the shower is in use; and pull to the side of the windows at the end of the tub when it’s not. Featured in This Old House. Photo by...

Corner Shower Rod with Heavy Round Brackets and Swivel Ceiling Support in Polished Chrome finish and Double Shower Curtains.

Bathroom with a window built instead of a longer wall, preventing any sort of enclosure, a 4 sided neo-angle rod was needed. With 2 linen curtains on each side, using open top shower hooks it can easily pass thru the ceiling supports whcih provide extra strength.

Circular Custom 1" Shower Rod. Suspended by 2 heavy duty 1" ceiling supports and two 5/8" diameter support. Powdercoated in bright red with open top shower rings to match.

Heavy Duty Neo Round Shower Rod in stainless steel. Used on bathroom with shower tray to match its contour.

Custom U-Rod. Powdercoated in Oil Rubbed Bronze to match decor. Slanted ceiling gave two different ceiling support lengths, with swivel support brackets.

Customized Enlarged Shower Rod for doctor's office. Used for patient space enclosure. Due to the high ceiling and long rod, a support was added that would attach to the wall.

A shaped modified curved shower rod in Oil Rubbed Bronze. Heavy Duty brackets. Black open top shower rings for easy passage of shower curtain through ceiling support.

A curved corner rod made from stainless steel, which will not rust.

Custom Shower Rod used in angled ceiling. Suspended by a fixed bracket and a swivel bracket. An attic bathroom.

A custom curved corner rod in a an attic bathroom. Heavy duty flanges were used to avoid the need of a ceiling support.

With a glass enclosure already placed, all was needed was a one-piece corner shower rod, secured with a wall bracket on one end, and 2 heavy duty ceiling supports. By using our open top shower rings, the hooks could easily pass thru the supports and close the curtain to meet the glass enclosure.

D-Shaped Shower Rod in Polished Chrome finish, over clawfoot tub. Rectangular brackets and two ceiling supports included on over 66" length.

Neo Round Shower Rod with roller ball rings in Chrome finish.

Shower rod made for angle ceilings usually found in attics. Made of 100% brass in chrome finish. Includes a rod support which attaches to ceiling for sturdiness.

A Corner Shower Rod in Oil Rubbed Bronze finish. Made from brass material. A sloped rod support was used for the angled ceiling.

Swing shower rod made from 18-gauge stainless steel rod. It covers 39" to 60" wide shower, which can swing in or out. Can be used by caregivers to provide accessible bathing assistance from the outside to a seated bather.

Suspended corner shower rod mounted to ceiling, in Satin Nickel finish with two 5/8" thick rod supports. All parts made from high quality brass.

“Thank you for the well crafted shower curtain rod. The fabricator followed the drawing perfectly."

A shower rod for a sloped ceiling, with swivel support & flanges due to the wall angle. Polished chrome finish.

Ceiling mounted shower rod in polished chrome finish. Held by two 5/8" medium supports. Made of brass material.

Neo-Angle in Oil Rubbed Bronze with Rectangular Brackets and Support. Entirely made of Brass material.

Corner Shower Rod is Oil Rubbed Bronze with two light supports and round brackets.

Custom Suspended Rod made to match curvature of corner tub. Made from Stainless Steel in chrome finish. Support used with a Ceiling Brace Angler for sloped ceilings.

Custom neo-angle shower rod. Brushed/ Satin Nickel with Round brackets and Light Rod Support. All brass made material.

Custom Oversized Corner Shower Rod in Flat Black with Heavy Duty Brackets and Light Ceiling Support