This poolside masonry seating wall was constructed in Lancaster, PA. The project consisted of masonry seating wall constructed along the edge of the pool decking. The wall is approximately 34 feet in length and approximately 18 inches in height and constructed of concrete block. We used brick that matched the existing brick facade on the house to face the wall. “Grapevine joints” were used to match with the house as well. In order to avoid disturbing tree roots and utilities for new footers. We constructed the wall on the existing concrete patio edge. The wall was pinned and mortared to the existing concrete. Natural flagstone wall caps approximately 1.5 inches thick with thermal edge finish were used to cap the seating wall. We did run into some setbacks during construction due to the weather. Specifically a bunch of cold rain. Fortunately we were still able to complete the project in a timely fashion before old man winter really starts to put a damper on things.