Synthetic Turf
• Prep surface area consisting of 5200 sq. ft. over 3 areas.
1. Remove all unwanted growth, weeds, and debris.
2. Cut and cap existing irrigation off new turf area.
3. Divert any sprinkler heads at turf edge to water beds, change heads if needed. Est. qty. not to exceed 15.
4. Lay approx. 5200 sq.f.t of metal mesh wire “per customer to prevent rodents / moles”. Customer provided materials.
5. Level and roll ½” new topsoil over 5200 sq. ft.
6. Install 5200 sq. f.t filter fabric.
7. Level and plate compact ¾” 5/8- crushed rock over 5200 sq. ft.
8. Install black trim border in all areas not adjacent to curbs, walkways, retaining wall, or existing hard surface border. Est. 350 linier feet.
• Install 5200 sq. ft. of new “spring” synthetic turf over 3 areas.
• Infill turf with layers of fine sand est. 7 yards.
1. Remove all unwanted growth, weeds, and debris.
2. Cut and cap existing irrigation off new turf area.
3. Divert any sprinkler heads at turf edge to water beds, change heads if needed. Est. qty. not to exceed 15.
4. Lay approx. 5200 sq.f.t of metal mesh wire “per customer to prevent rodents / moles”. Customer provided materials.
5. Level and roll ½” new topsoil over 5200 sq. ft.
6. Install 5200 sq. f.t filter fabric.
7. Level and plate compact ¾” 5/8- crushed rock over 5200 sq. ft.
8. Install black trim border in all areas not adjacent to curbs, walkways, retaining wall, or existing hard surface border. Est. 350 linier feet.
• Install 5200 sq. ft. of new “spring” synthetic turf over 3 areas.
• Infill turf with layers of fine sand est. 7 yards.
Project Year: 2017
Project Cost: $75,001 - $100,000
Country: United States
